The ceiling is often an independent element of design and organically fits into the artistic image of the room. Modern manufacturers offer a huge amount of materials for decorating ceilings, the most popular of which is rightly considered drywall.
Advantages and disadvantages
The first room where a person enters at the entrance to the house is the entrance hall or corridor, which can be called the visiting card of the dwelling. Depending on their condition and decoration, a general impression is formed about the apartment and its owners. The gypsum board ceiling can be called the optimal solution when decorating the space, as this material allows you to quickly and inexpensively give the room a unique look. High consumer demand for plasterboard ceilings is due to a number of advantages distinguishing these practical structures from structures made of other materials.
- False plasterboard ceiling perfectly mask defects and roughnesses of ceilings and makes the surface perfectly smooth. This is especially valuable when decorating rooms in old wooden houses, where the ceilings crack over time, and even in the middle often passes a floor beam.
- Due to the low weight of GCR, the ceiling structure is very light and does not have a noticeable load on the floors. So, one square of the plasterboard ceiling area weighs no more than 10 kg, including a metal profile and fasteners. For example, even a 10 mm layer of plaster of the same area weighs a lot more.
- Drywall is so simple and flexible in processing that the construction of the ceiling structure can be done independentlyAt the same time, you need to start with single-level structures. Ceilings of a more complex configuration should be postponed until later, and experience should be gained on simple options.
- If you have the necessary components, installation of a plasterboard ceiling will not take much time. Professional craftsmen are able to assemble the frame during the day, sheathe it with drywall and putty. In the absence of experience, it can take 2-3 days to install the ceiling, which is also a short time for such large-scale works.
- Low cost GCR allows you to significantly save on the repair of the hallway, while receiving a stylish and practical ceiling.
- Due to the presence of a frame, there is always a small space between the gypsum board and the ceiling. This allows you to hide communications there, which eliminates the need to ditch the concrete surface.
- Drywall is absolutely safe for humans and can be used in residential premises. Its environmental friendliness is due to the composition in which, in addition to gypsum and plain paper, there is nothing more. The main thing is to use the same harmless materials as the drywall itself as a topcoat, and to purchase only certified hard putties.
- And since plasterboard ceilings are fireproof, then any light sources can be mounted in themwithout fear of overheating of the surface and its ignition. For comparison, on ceilings made of PVC, you can install incandescent lamps with a power of not more than 60 watts, and halogen lamps with a power of not more than 35 watts.
- Drywall cuts and bends very well, which allows you to give it any form, embodying the most daring design decisions.
True, there are also drawbacks to GKL structures. We list them.
- Plasterboard surfaces need finishing, which is why their installation requires much more labor compared to stretch and slat ceilings.
- GKL ceilings are not recommended for use in new buildings, due to possible shifts that occur due to shrinkage of the house.
- Due to the need to install a metal frame, plasterboard systems steal usable space and visually lower the ceilings.
- The impossibility of mounting alone. This is due to the large length of the sheet material, which without additional support points can easily break.
Species overview
Plasterboard ceilings are classified according to several criteria, but the main one is the type of construction. According to this criterion, several varieties of ceiling systems are distinguished, and their main characteristics are discussed below.
Single level
These ceilings are a flat, straight surface and are installed in small hallways. As a topcoat, you can use paint, wallpaper, self-adhesive film and decorative plaster. The straight ceiling is ideal for any interior and is very easy to install.
To install it, it is enough to screw a metal frame to the ceiling and fix the GCR to it.
Duplex
Such designs are a popular solution for decorating ceilings in hallways and give the rooms a stylish look. Possessing high decorativeness, such models are able to visually push the walls of narrow corridors. This can be achieved by combining arched and straight lines, which are selected taking into account the size of the hallway.
In addition, well-thought-out and carefully designed plasterboard ledges above cabinets, hangers and racks help to emphasize the dignity of furniture and attract attention to them.
Layered
Such GKL ceiling systems look great in spacious hallways and halls, and can include three or more levels.Such designs are distinguished by a variety of geometric shapes and the possibility of implementing bold artistic designs, however, due to too many elements they are heavy and look bulky in small spaces. Besides, Due to the multiple curvilinear combinations, only a specialist should install such a ceiling.
It will be very difficult for a novice master to perfectly fit the elements to each other, because of which, after installation, the parts may crack.
Combined
This option is a combination of drywall construction with stretch ceiling. Due to the wide variety of PVC films, you can create real masterpieces on the ceiling. Plasterboard plates in such structures play the role of boxes or curly frames, and most of the decorative load falls on the stretch fabric. With it, you can get a reconstruction of the starry sky, saturate the room with bright shades of the rising sun. The combination of GCR with glass looks very impressive, where glass can be used in the form of transparent and opaque inserts, a screen over which clouds will “run” or peep over the tops of trees.
For this, the side elements of the drywall construction located above the glass are pasted over with a decorative film with photo printing and effectively illuminated from the inside.
Design options
The design of plasterboard ceilings is chosen depending on the size and interior of the hallway. In tiny rooms it is better to install a simple single-level ceiling. If the area allows you to suspend a more interesting design, then the design work needs to start with sketching the sketch. In the picture you should display the desired background and see if it will be in harmony with the walls and furniture.
If it is supposed to put a drawing on the ceiling, then for small halls it should be made as simple as possible.
To visually increase the space, it is necessary to plan the backlight so that it fills the corridor with light as much as possible, but does not hit the eye. As for color solutions, then in small rooms it is better to use light shades, since dark colors visually make the space even smaller.
When choosing a ceiling design for spacious hallways, the general style of the room and the compatibility of colors should be taken into account. In such spaces, multi-level figured constructions combined with stretch sheets and glass look good. The ceiling structure with the version of the transition of the ceiling from the hall to the living room looks interesting. Such models are designed in the same style, but the geometry of the hallway ceiling may differ from the geometry in the hall.
The decoration of drywall and the choice of topcoat are completely dependent on the style of the room. So, for Scandinavian style, country, provence and minimalism Smooth light surfaces with few curvilinear levels are good. IN rustic and ecological styles drywall is supplemented with beams under a natural tree, and for classic directions use beautiful borders, embossing, baguettes and stucco molding.
Lighting Features
One of the main advantages of plasterboard ceiling structures is the ability to install built-in lamps. To do this, a preliminary sketch is drawn, on which the number of lamps, their location and cable entry points are marked.
The most suitable options for drywall are LED and neon tapes that can visually “raise” the ceiling if they are dispersed around the perimeter of the hallway. From flexible LED strips form various inscriptions, curls and figures.
Spotlights also look good on drywall systems. The most popular of these are LEDs, which do not cause eye irritation and gently scatter light. In addition, they consume a minimum of electricity, have a long service life and are available in a wide range. Classic chandeliers combined with plasterboard ceilings can be seen infrequently. This is due to their high weight and risk of damage to the fragile gypsum structure. In cases where the design requires the installation of a chandelier, they are tightly mounted to the main ceiling, and only then, taking into account their location, the GKL structure is built.
Beautiful examples
Plasterboard ceilings significantly transform the room and effectively emphasize the overall style of the hallway.
- A simple ceiling with original lighting looks very aesthetically pleasing and visually expands the space.
- The two-level drywall construction harmoniously repeats the wood texture of the doors and looks very noble.
- A multi-level system of gypsum plasterboard is an excellent solution for spacious rooms.
- The successful combination of LED strip and spotlights will fill the hall with light and give it a futuristic look.
- The combined design of drywall and stretch fabric will bring a touch of luxury to even the simplest hallway.
The fact that plasterboard or a suspended ceiling is better, see the next video.