How to clean the toilet from limescale?

The toilet provides a comfortable life in any apartment, but if you use it for a long time, it can cause limescale. He does not appear in one day. Plaque will not harm human health, but will look very ugly. It is worthwhile to understand in detail how to clean the toilet bowl from limescale using the methods available to everyone.

Even if you often flush the water in the toilet, limescale may appear there. The main reason is organic chemistry. If the surface is rough, plaque there accumulates quickly enough. Of course, urea remains, but there are fewer such traces. It is from running water that lime enters the surface, which interacts with urine and as a result remains inside in the form of plaque.

If people often flush after themselves after using the toilet, a lot of water passes through the toilet, and pollution appears very quickly. The situation is complicated in cases where there are problems with the drain tank. Water flows constantly, which leads to strong plaque. Of course, the liquid is filtered, because it enters the tank from the water tap. However, lime is distinguished by very small components that penetrate the filters without any problems. These components are so small that they cannot be seen, but they can accumulate and cause problems.

To clean the plumbing as efficient as possible, certain rules should be taken into account.Otherwise, you can even damage the surface or cause damage to your health. The rules are as follows:

• first remove all water from the toilet. It can be scooped up using a disposable plastic cup. Then drain the bottom with a rag;
• since many detergents are dangerous for the mucous membranes, it is recommended to use a respirator and safety glasses;
• you need to clean the plumbing with rubber gloves. Thanks to them, the skin of your hands will be protected from aggressive detergents. Of course, hygiene is also important, because the toilet is far from the cleanest place in the house;

• after applying liquid products to the surface, you need to leave for some time (to find out exactly how much you need to wait, carefully study the instructions);
• After preparing the plumbing, use the selected tool. Just pouring powder onto the surface will not be enough. It is recommended to use a stiff brush or brush (however, the cleaning tool must not be made of metal, otherwise you may damage the enamel).

To effectively clean your plumbing, prepare the following:

• brush, brush;
• powder, gel for cleaning;
• latex gloves;
• a fairly stiff sponge;
• plunger;
• eye protection glasses, respirator.

You can wipe out old traces using the following tools:

• iodine;
• hydrochloric acid;
• citric, acetic acid;
• electrolyte;
• baking soda;
• special tools.

You can prepare the mixture yourself, consisting of the following ingredients:

• pharmacy iodine;
• baking soda;
• apple, nine percent table vinegar.

Take vinegar (200 ml) and heat it to 50 degrees. To do this, use a closed container. Add iodine and baking soda as well. Completely empty the toilet bowl from the liquid and pour the resulting mixture there. Then you need to close it and wait about 12 hours (some leave plumbing like this for the night). Then clean the plumbing using a brush and rinse the surface with water. If there are too many traces, repeat the procedure.

Surface application possible undiluted pure vinegar. Rub the place treated with such a tool immediately using a brush on a long handle or a brush.

If limescale has appeared a long time ago to wash it, you can use an electrolyte. It contains acid, characterized by increased concentration. When working with such a tool, you must use gloves, a respirator, safety glasses. Pour the liquid very carefully into the toilet so that splashes do not fly. The product should be on the plumbing from half an hour to an hour, not longer (the period depends on whether there are a lot of marks on the surface).

To remove traces of plumbing, treat the surface with citric acid. Enough of two small packages. The same amount of funds will be needed for a tank of water. Make sure that no liquid is poured into the toilet bowl.

Today, many remove limescale using carbonated drinks. Pour three liters of such liquid into the toilet and wait a few hours. After adding detergent, take a brush and rub the surface.

Almost any deposition in the toilet can be removed at home using iodine monochloride. Such a solution can be purchased at a veterinary pharmacy. It is necessary to apply the product on the surface and after some time rinse it with water.

At the present time, a variety of cleaning products are available to consumers: liquids, gels, creams, powders. They differ from each other in the main components. The following options are possible:

• alkali;
• acids;
• chlorine.

Chlorine products are commonly used for regular cleaning. With their help, you can disinfect and wash the plumbing constantly - and at the same time do not be afraid that it will deteriorate. The main disadvantage of chlorine products is an unpleasant odor, but it disappears quite quickly.

Means consist of potent acids: oxalic, phosphoric, hydrochloric, formic. They cannot be used too often. It is recommended not to forget about caution.

If the plumbing is constantly cleaned with acids, the surface may deteriorate: they corrode faience and ceramics. Going to use the powder, Be sure to read the instructions for use.

Oxalic powder acid can be used in one of two ways. You can mix the powder with water, pour it out and close the lid. Wait about an hour and rinse the surface with water, get rid of residues of plaque with a brush. Another option is to slightly moisten a soft cloth, pour powder on it and treat the plumbing.

You can use hydrochloric acid rather than oxalic acid. After completely removing water, pour acid into the bowl. Close the toilet and wait 15 minutes, then flush the surface with running water. For plastic pipes this option is not suitable, but for steel it is quite possible to use one of the above acids.

Liquid alkaline solutions can be used without fear that plumbing will be damaged. With their help, various contaminants are removed from the surface and disinfected. Alkaline products very well remove organic fats that clog sewer pipes, plumbing.

Powder products very well help to cope with pollution in a dry form. If you intend to use them, carefully drain the drain pipe and bowl. Read the instructions in advance. To apply the product, you can use a brush or a hard sponge. It is better not to use metal products, otherwise the surface may be deformed.

Special gels and creams appeared not so long ago, but quickly became very popular. Such products can achieve very good results - and at the same time are soft, do not damage the surface. It is easy to use them, you only need to consider the recommendations that are indicated in the instructions. Gels and creams can be designed for certain actions (combating certain contaminants, regular cleaning) or universal.

Immediately understand what is better to choose for cleaning plumbing in a particular case, it does not always work out. To determine the most suitable option, You need to use different gels, creams, powders or improvised products. So, you can compare the results and choose the best option.

Of course, it is always better to prevent the occurrence of a problem than to deal with it. If you want to avoid limescale, Do not forget about the following recommendations:

• put wet wipes near the toilet, it is very convenient to clean the outside and the seat with them. However, they should not be washed off, otherwise you may encounter a problem such as a blockage;
• You can buy effective products or special pills, with which you can easily and quickly remove traces. They will allow you to get rid of lime and prevent the appearance of new layers;
• repair the tank on time, so you save on water and prevent the appearance of unaesthetic traces;
• if necessary, do not forget to use a brush;
• use special non-aggressive agents to clean the surface, carry it out every week, at least.The frequency depends on the number of people living in the apartment.

It is necessary to clean the toilet bowl of urinary stone and lime scale regularly. So, you can not only prevent the occurrence of an unpleasant odor in the room, but also achieve a neat appearance of plumbing. Regular thorough processing of plumbing will ensure that various harmful bacteria do not multiply.

And now we recommend watching a video in which the housewife will tell you a simple way to clean the toilet.