Everyone at least once burned a pan. And everyone posed to himself the question of how to restore her original appearance. Choosing the wrong cleaning methods can completely ruin the dishes or spend a lot of time, and the effect will be scanty. To quickly return the product to its original appearance, it is necessary to consider the type of pan when choosing a product.
How can I wash carbon deposits?
If the food burns during cooking in a saucepan, a deposit forms, which is quite difficult and problematic to cope with. To clean the dishes from soot, salted water should be used. It should be poured into a container, heated and boiled for several minutes.
For effectiveness, soda can be added to the water. The higher the concentration of the solution, the better. After you do not drain the water, but leave it until the morning. Then carbon deposits can be easily removed.
To clean enameled dishes from soot, use a brush. Strong household chemicals with abrasive particles are not recommended.as they may damage the surface of the product. This will further affect the dishes themselves.
If there are scratches on the enamel, the dishes will constantly burn, so it is better to throw it away.
After cleaning dishes with enamel from plaque, the surface often has a dark color or plaque of yellowness. The bleach will help fix this problem. It is enough to add a little whiteness to the water and boil the dishes. But remember that rinsing after the procedure must be thorough.
Many housewives clean the pan from soot with detergent. It is worth collecting water and adding a lot of detergent to the container, heat and boil a little. Then you can use a hard sponge to remove carbon deposits from the coating of dishes. This method allows you to return the pan to its original appearance.
To remove carbon deposits, it is not necessary to use household chemicals, you can use folk methods. To return to a covering whiteness will help apple peeling. They must be put in a pan, pour water and add a little lemon juice. Then boil a little. An alternative to lemon juice may be acid.
Vinegar will help restore the shine to aluminum dishes. It must be mixed with water, pour the pan and boil over low heat. But remember that this method is not suitable for cleaning enameled dishes.
You can wash burnt food from the bottom of the pan using stationery glue.
You need to take a bucket and pour boiling water, in which you should dilute 100 grams of silicate glue, as well as add soda ash. Next, the solution must be put on fire and brought to a boil. In the container you need to lower the pan and boil it for about 30 minutes. After the procedure, the pan should be cleaned with a sponge.
Instead of soda, you can use laundry soap. It should be grated for quick dissolution in water.
The carbon layer can be removed using a conventional toothpaste. You can buy specially the cheapest, because the price does not matter. Moisten contaminated areas and treat with toothpaste. After a few hours, the pan should be washed under water using a sponge or brush.
How can I clean easily?
There are many methods that can help clean a burnt pot at home. Inexperienced housewives immediately begin to remove soot with the help of metal brushes and sponges. This should not be done so as not to spoil the dishes completely.
First you need to remove burnt food from the dishes. Then pour warm water. The use of cold water negatively affects the integrity of the enamel coating.
The most popular way is to use salt, as it is in every home. Need to prepare a solution: for one liter of water you need 2 tbsp. tablespoons of salt.
It is necessary to drain dirty water and fill in the prepared solution. Next, the pan needs to be put on fire and boiled. Time depends on how much the product is burnt. It is necessary to wait for the burnt residues to begin to separate from the walls inside the dishes. When the bottom becomes clean, the container must be removed from the fire, drain the water and rinse thoroughly. Next wipe with a dry towel.
Salt can be replaced with ordinary detergent, but its concentration must be high in water for the effectiveness of the cleaning effect. If the glass covers are burnt, then different methods can be used.
The use of vinegar or soda is ideal. They can be cleaned of carbon deposits using soapy water or coffee grounds.
After cleaning the pan of stubborn dirt, yellowing may remain. To get rid of it, you must use vinegar. One liter of water will require 5 tbsp. tablespoons of vinegar. It is necessary to completely cover the inner walls with the prepared product and put on fire. Boil the dishes should be from two to three hours.
To get rid of the blackness at the bottom of the pan, you can use the whiteness.
Due to the high chlorine concentrate, it allows you to return the whiteness of the surface of the dishes. Pour into the pan bleachso that it completely covers the black bottom, and then boil.
Often during burning, not only the internal walls of the product suffer, but carbon deposits also form on the outside. The reason may be runaway milk, boiled soup or residual fat. Silicate glue will help to cope with external cleaning.
It is necessary to dilute in a few liters of water one tube of glue, pour the solution into a special container and place the burnt product there. Put on fire and boil for about one hour. After this procedure, the dishes will look like brand new.
Ideal for cleaning the outside of the pan. fine sand. This option will allow you to clean dishes outdoors. Sand can be replaced with ordinary soda.
There are many popular ways to clean pots of old fat. It is necessary to take one potato, cut it in half and dip it in soda. Carefully rub the bottom of the dishes. It is the juice of potatoes and soda that allows you to remove plaque.
To remove grease from the walls of the dishes, you can use tea bags. Use a dry sachet over old fat. It will immediately begin to dissolve. To clean the outside, you can boil in a soda solution. A bucket of water will require approximately 2-3 tbsp. tablespoons of soda. Then the dishes should be boiled in this solution for about an hour and a half. At the end of the pan you need to wipe with a cloth.
From jam
If you need to wipe the aluminum pan from the burnt jam, you should also use soda. Dishes should be filled with water and add 1 tbsp. teaspoon of soda, as this tool perfectly softens carbon deposits and promotes easy removal. The container must be heated and boiled over low heat for 20 minutes. Next, the pan should be cooled, pour the liquid and remove the remaining jam with a sponge. If you immediately fill the product with water, the cleaning process will be quite fast.
Gentle methods will be required to clean enameled dishes from burnt jam.
Do not use soda, because it can damage the enamel, it is worth giving preference to salt.
One liter of warm water will require about 8 tbsp. tablespoons of salt. The prepared solution must be poured into burnt dishes and put on fire. Boil for about 30 minutes, then cool and remove all soot with a sponge.
From caramel
To wash the dishes from caramel, you can use the same methods as for cleaning burnt jam. To eliminate caramel from a Teflon product, you need to use a lot of water and add a little dishwashing liquid to it.
For cleaning the aluminum surface, boiling dishes with the addition of silicate glue, laundry soap, soda or citric acid is ideal. To remove traces of soot, polish the surface, using a few drops of ammonia.
For porridge
Many housewives are interested in the question of how to clean the pan from burnt porridge. Usually this problem occurs in young mothers who, being distracted by the child, do not have time to follow the porridge. Buckwheat usually burns, as it is cooked in a small amount of water. The following methods will help clean the pots if pasta or beets are burnt.
First you need to remove the burnt porridge and let the dishes cool. Next, fill the tank with water and add 1 tbsp. spoon of salt, heat and boil a little over low heat. After draining the contents, apply vinegar and soda to the sponge to thoroughly treat the burnt areas.
If we talk about a metal pan, then an excellent solution is to use a regular sponge with detergent.
Enameled dishes should be poured exceptionally cold water. For boiling, you need 1 tbsp. spoon dishwashing liquid.
To clean the Teflon pan, just draw water and pour detergent. Next, the product must be left for 30 minutes. Using a sponge, carefully remove burnt traces of porridge.
From milk
Pans very often burn when boiling milk. To wipe the product, you can use the following tools:
- Activated carbon. It is necessary to take 8 tablets and grind them thoroughly, then sprinkle on the burnt bottom. After one hour, pour the dishes with cold water and leave for another 20 minutes.After rinse the pan under warm water.
- Milk serum. This tool is suitable for cleaning any type of dishes. It is necessary to fill in the burnt bottom with serum about 3 centimeters higher and leave for 24 hours. Then wash with detergent.
- Coffee grounds. It is necessary to cover the bottom of the coffee grounds and leave for three hours. Then, using the hard side of the sponge, clean the bottom of the product.
We clean metal surfaces
A large number of pots are made of metal. The most popular is steel cookware, since it very rarely burns and is characterized by ease of use. The cast-iron pan is also not prone to burning, but is characterized by a large weight.
To wash the metal surface from the burn, you can use the usual dishwashing detergent.
It is necessary to fill the bottom with this tool and give time for softening. When the crust becomes soft, remove it with an abrasive sponge.
To eliminate hard to remove soot, you can use folk methods:
- A fairly common way is a porridge-like remedy made of water and soda. It should be applied to the place of burning, and after a few hours to clean using a hard washcloth.
- You can remove the burn using boiling. In the dishes should draw water and pour 2 tbsp. tablespoons of soda. It takes only 15 minutes to soften the dirt.
- To clean steel dishes from the outside, you need a container in which the burnt product will fit. It is necessary to draw water into the dishes and add vinegar in a 1: 2 ratio. The solution should completely cover all burnt areas of the dishes. Next, you need to boil, remove from heat and give time to thoroughly soak. Additionally, prepare a powder of 200 g of soda and half a glass of salt and sprinkle with vinegar. This option acts as a scrub.
Often, housewives buy aluminum pans, because they practically do not burn. But if such a nuisance remained, then it is rather difficult to wash them, since burnt food is very quickly eaten into this metal.
To begin with, dishes from aluminum must be put on a wet rag. It is enough to wait half an hour and you can go to the cleaning process:
- Pour water into a pan and add soda ash. Then it needs to be put on fire and boiled for 30 minutes.
- You can prepare a solution of soda and dishwashing detergent. It should be the consistency of thick sour cream. In the solution should be added 2 tbsp. tablespoons of hydrogen peroxide. After the solution should be applied to burnt places and leave for several minutes. After that, you can proceed to cleaning the pan from the burn with a metal washcloth.
- The most effective way is a solution prepared from 1 tbsp. tablespoons of soda and silicate glue. Boiling time is half an hour.
After removing burnt food from a metal pan, a dark coating may remain. To resolve it, you must use one of the following methods:
- You need to make a cleanser, where 300 grams of water will require 15 grams of borax, 15 drops of ammonia solution. This mixture should be applied to darkened areas and left for half an hour. After the pan you must rinse thoroughly.
- The pan can be poured with yogurt or brine, and then left for one hour. The product will look like new.
We clean the enamel
Enameled dishes must be cleaned immediately after burning. If it is left for 2-3 days without cleaning, but only filled with water, then it will be simply impossible to restore it.
First you need to wait for the enameled dishes to cool completely, since the enamel deteriorates during sudden changes in temperature conditions. In a container with damaged enamel, food will constantly burn.
After cooling, you need to use one of these methods:
- Sprinkle the scorched bottom with salt and moisten a little with water. In this form, leave the dishes all night.In the morning, it is necessary to remove the salt and clean the place of burning with a sponge.
- If the first method did not give results, then it is necessary to make a special solution with a large addition of soda, pour the dishes, heat and boil. After the dishes should be left with the liquid until the morning. Further, the burnout can be removed with a wooden spatula.
- Vinegar will help to cope with a strong deposit. It is necessary to prepare a solution: take 1 liter of water, 3 tbsp. tablespoons of vinegar and 50 grams of soda ash. Dishes should be poured with the prepared solution and boiled for about 15 minutes. After this, the liquid must be immediately drained and thoroughly cleaned of the burnt surface. All actions must be performed quickly, because vinegar negatively affects enamel.
- An excellent method is the thick of brewed natural coffee. To clean the dishes, cover the bottom of the product with warm grounds and leave for half a day. Then the bottom of the product should be thoroughly cleaned with a sponge, washed under water.
- You can remove burnt food using an ordinary onion. It should be cut and placed in a burnt product, covered with water and heated over a fire. To deposit better departed from the walls, it is worth using boiling, and then wait for complete cooling. Then you can proceed to the usual cleaning of the product.
- A good remedy is to use potato peels, peel apples, or lemon acid. It is necessary to fill one of the ingredients with water and boil for about 30 minutes.
- The famous Coca-Cola will cope with the remains of burnt food quite easily. The bottom should be filled with a drink and left for several hours. For greater efficiency, you can additionally apply boiling over low heat.
- Even regular ash will help fix the problem. You need to make a porridge-like remedy by mixing ash with water. It must be applied all over the bottom of the product and left for one hour. Then add water and boil for another hour. An alternative to ash is activated carbon.
- To eliminate yellow plaque from the enamel coating, you can use tooth powder. It must be mixed with water until a thick mixture is formed. Alternatively, toothpaste may also be used.
Washing glass dishes
To clean glassware from burnt food, it is necessary to use the same methods as when washing Teflon or ceramic dishes. A glass pan can easily be cleaned with soda, vinegar, soapy water or coffee grounds.
It is forbidden to use harsh measures, for example, heating with a blowtorch.
Remove the cinder from the ceramic pan
Most housewives use ceramic dishes due to its ease of use, as well as the ability to cook healthy and wholesome food. In a ceramic pan, even with heat treatment, the beneficial properties of food are preserved.
If the food is burnt to the bottom of the ceramic pan, you must perform the following steps:
- Pour the dishes with water at room temperature.
- Take one bar of soap and grate it on a grater.
- Add soap and soda ash to the water.
- All components must be thoroughly mixed until completely dissolved.
- The pan must be set on fire, brought to a boil, and boiled for about three or four hours on a small fire.
- Next, the solution must be drained and rinsed with hot water, optionally using a sponge.
- Dry with a soft towel.
In order to prevent the formation of burns on ceramic dishes, it is worth using a proven tool. The procedure should be performed before the first use of the product. First, the pan must be rinsed under running water and wiped dry. Pour into the dishes 5 tbsp. tablespoons of salt and put on a small fire for about 15 minutes. Then remove the product from the fire, remove the salt and leave to cool completely. Then wipe with a damp cloth to remove residual salt.
People's councils
Modern manufacturers of household chemicals offer a wide range of household chemicals to eliminate various kinds of contaminants, including removing burnt write from the walls of the pan. But do not abandon folk methods. They are already time-tested and are safe for health.
Folk Tricks:
- To give the pan a shine, you can use a small piece of raw potato. More effective is a solution of vinegar.
- Acetic acid will help eliminate stains from water. It is enough to dip the product in vinegar for 15 minutes and rinse with water.
- The combination of toothpaste and ammonia allows you to get rid of stains. These components should be mixed thoroughly until a thick paste forms. Then you need to apply the product on the spots and rub it a little with a sponge. After cleaning, the surface should be washed under water.
- To make the aluminum pan gain its original shine, the use of clay will help. It must be rubbed on the surface.
Often with daily boiling water on the walls of the pan, a scale deposit is formed. To eliminate it, citric acid is ideal. It can be used for different types of dishes.
Pour a bag of citric acid into a container and add water, bring to a boil and boil for half an hour. Next, water needs to be drained and a plaque removed. It remains to rinse the pan and it will look like brand new.
Effective for eliminating plaque and burning is Coca-Cola. To clean minor contaminants, you can pour the drink into a container and leave for one hour. To remove strong carbon deposits, the pan must be boiled for another half hour.
For how to quickly and efficiently wash a burnt pan, see the next video.