How to clean the kettle from scale and other contaminants?

Many turn a blind eye to the problem of scale, but from time to time it eats into the surface of the kettle more and more, and then no folk remedies will help you cope with this trouble. In this case, you just ruin your kitchen “friend” and spend money on buying a new one. To avoid this, it is worth understanding the causes of scale, its consequences and cleaning methods.

The main reason for scale formation in your kettle is water. But only if for a person it does not pose a great danger, then for a kitchen appliance it is a deadly liquid. Conventional running water contains many impurities such as magnesium, calcium, and various salts. At the time when a person boils water, metal particles accumulate inside the kettle, in particular this coating remains on the heating element.

Seeing a raid on the dishes, everyone understands that this must be disposed of. Unfortunately, it is not always possible to achieve the desired result immediately. In most cases, we immediately run to the hardware store, buy a descaler, forgetting that it can harm our health more than the scum itself. There are many other ways to clean kitchen appliances that are safer and won't hit your wallet.

You can destroy a raid from a metal kettle acetic acid. This method is recognized as the most effective. Per liter of water will require 100 ml of vinegar. The solution obtained as a result of mixing must be poured into a kettle and boiled properly. Wait 15-20 minutes. During this time, the scum should completely disappear. The walls of the kettle may not be completely cleaned. In this case, the procedure can be repeated. Undiluted vinegar should not be used, since the liquid can destroy the galvanic coating of the heating coil.

Normal will help to clear a scum baking sodathat is in every house. You just need to pour water into the container and add a spoonful of this product. You need to warm everything on low heat until the layer of limescale is left behind.

A good tool to combat plaque is considered lemon acid. It can be used in work with any heating element.

When preparing the cleaning agent, pour one liter of water into the container and add two tablespoons of citric acid. Boil the water and cool, then drain, sponge the remaining lime, and rinse the kettle properly.

It turns out that such a beloved drink by everyone Coca cola able to handle plaque in your kettle. To check the effectiveness of such a remedy, you first need to buy a drink and let it run out of steam. After that, calmly pour the Coke into the teapot until about the middle and heat over low heat until the lime leaves.

Electric kettles should not be cleaned in this way, the liquid may leave a yellow coating on the white coating. After that, it is difficult to wash the resulting yellowness from a plastic device.

If the above recipes did not help, you will have to use more cardinal ways to solve the problem. Many chemicals are ready to help you with this.

For washing and dishwashers often use "Eona bio", But it can also be used calmly to combat scum. The liquid is diluted with hot water and poured into the kettle. By the same principle, you can usel Calgon, "Mr. Des Antikipin", "Chistin". Limescale is also used Refine, Astonish Limescale Remover, Selena. All these solutions are used to remove scale in teapots, irons, coffee makers.

It is worth noting that more often than not, expensive means can cope with difficult pollution faster and more efficiently at a minimum cost.

Descaling is sometimes quite difficult. Therefore, sometimes it is necessary to use heavy chemical “artillery”. In any hardware store, you will be advised of various drugs to combat hated scum. Many housewives are advised to use the tool "Anti-scale."

There are many more different means aimed at combating scale. Some of the most popular are:

• Frau Schmidt;
• Clean home;
• "Romax anti-scale";
• Melitta Anti Calc;
• Tytan;
• Domol;
• Bugs Anvit;
• Pure water.

By the principle of action, all chemicals are the same. The substance is applied to the surface and thoroughly rubbed. Five minutes the kettle is soaked, after which the solution is washed off. A chemical preparation in liquid form or tablets is dissolved in hot water and poured into a kettle. All that remains is to boil and then rinse it.

To clean the kettle at home is not difficult. However, it is important to choose the appropriate method specifically for your device.

An electric kettle is not recommended to be washed with vinegar and Coca-Cola. If your kitchen friend has a plastic or glass case, the consequences can be most unpredictable. It is better to clean it with citric acid. When preparing the solution, one tablespoon of acid and a liter of water will suffice. After boiling, allow the appliance to cool, drain the liquid and rinse thoroughly.

To get rid of this model of the kettle from an unpleasant plaque will be vinegar. Previously, it was used against scale on copper teapots. This method is suitable for any iron and metal models, except aluminum. Dilute 150 ml of vinegar with water, heat the solution over a fire. A full cleaning usually takes 20 minutes. Once the kettle has cooled, pour water out of it and rinse with warm water.

Another “pill” for getting rid of a small scale deposit for enameled dummies is peel from apples or pears. Just pour water into the kettle, throw the peel into it and boil it. Clean the inside of the container with a sponge and rinse with water.

A glass teapot can be cleaned with vinegar essence. There is nothing complicated here. You need to mix one glass of water and a glass of vinegar, fill the container with all this and heat over low heat. Then leave for several hours, rinse and dry.

If you don’t feel like messing with vinegar, use soda. Dissolve a spoonful of soda in hot water, boil for ten minutes. Then rinse and wipe the kettle.

If none of the two options helped to cope with the scum, mix water with vinegar and soda. Bring the resulting solution to a boil and let stand for 30 minutes. Then cool the appliance and rinse the container.

Another way to give your kettle a fresh look - lemon acid. Here you can apply the acid itself, juice or lemon slices. Prepare one tablespoon of acid per liter of water (1 tablespoon of lemon juice or 1 slice). Boil the resulting mixture, allow to cool and rinse the appliance.

Lemon juice can also be mixed with vinegar. This option will also help get rid of scale. Mix a liter of water with the same amount of vinegar and lemon juice. Boil, then rinse.

Ceramic teapots are distinguished by their beauty and durability. They require careful handling. Since the ceramic coating is brittle, any cleaning can damage the surface of the device.

It boils in a container, after which it is necessary to allow the device to cool. Next, you need to wash the scale with a sponge and detergent. There are no special recommendations for cleaning ceramic teapots, you can use any other method described above, but it is worthwhile to significantly reduce the concentration of aggressive substances.

Using a complex mission to eliminate scale quickly will help using several active ingredients. To prepare it, you will need water, soda, citric acid and 100 ml of vinegar. Next, pour water into a container, add one spoonful of soda and bring to a boil. After draining the solution, fill the kettle with water, add acid, boil and let it warm for about 20 minutes, drain the liquid. At the end, we pour vinegar essence into the container, boil for 30 minutes, pour it out and rinse everything thoroughly with running water.

A trio of vinegar, soda and sponge will also cope with a strong raid. On a sponge moistened in vinegar, pour soda and rub until porridge forms. The mixture needs to clean dirty areas and rinse well.

Fill the container with water, pour a little powder and boil. Add citric acid to the same solution (one tablespoon will be enough) and set again to boil. The appliance will need to cool, then rinse the contents and rinse thoroughly.

Rust often forms on the surface of the kettle. You can remove these contaminants citric acid. It will not damage the metal walls. Strong rusty stains on the outside of the kettle should be removed in a few steps. Immerse the kettle in citric acid for a couple of hours. To prepare the solution, you need to mix 2-3 tablespoons of the powder and a glass of water. Then use a toothbrush to clean the surface. If the procedure did not help, repeat everything again.

Small impurities will be removed by a solution consisting of 1 cup of water and 1 tablespoon of powder. Apply liquid to a contaminated area with a sponge and wipe well.

If rust forms inside the kettle, clean it with a citric acid solution. with a concentration of 10%. Allow the dishes to stand for 10 hours or leave overnight. In the morning, drain the contents from the container and rinse off any remaining rust and mortar. If the result does not suit you, the procedure can be repeated.

Periodically, tea plaque appears on the surface of mugs or teapots. Most often this is due to the fact that the dishes are not washed for a long time. The coloring matter of the drinks forms a coating that accumulates, and not only can spoil the taste of the drink, but also outwardly gives the mugs a completely unrepresentable appearance. One gets the impression that one has to drink from dirty dishes.

The best and surest way to deal with such a plaque is to try to wash the dishes after each use. If the time for this is not always enough and the presence of such dishes in the house is a fact, then the cleaning products intended for this will come to the rescue. Most often, baking soda is used in this case. She well removes a similar plaque.

You can eliminate plaque at home using other methods. For example, many are advised to use kefir or green tea for cleaning. At first glance, this is absurd, but according to the hostesses, if you fill a cup with kefir or green tea and leave it overnight, then in the morning you only need to rinse it and enjoy their cleanliness.

Someone is cleaning the dishes with salt, but forgets that it can damage the surface. Scratches may appear on the walls. Therefore, it is better to use a saline solution. Dissolve salt in hot water, and then wash the dishes in this liquid.

Periodically, all kitchen utensils become a victim of oily deposits and carbon deposits. You can cope with an unpleasant layer with citric acid. To eliminate small greasy spots, take a slice of lemon, dip it in fine salt and wipe the dirty place.

Outside, you can wash the burnt layer and greasy deposits from the kettle, immersing it for several hours in a container with lemon solution. To do this, mix lemon powder and water in a ratio of 1: 5. The temperature of the resulting mixture must be high, then the solution will clear the dishes from burning faster.

If the spots are already old, then removing them will help baking soda and citric acid. Mixed in equal proportions, the ingredients form a mixture that needs to cover the wet surface of the kettle. The solution will chemically react with fat and help remove fat. After application, you need to give a little time for the reaction, and then remove the layer of dirt with a sponge and wash the dishes.

To reduce the problem of scaling, it is necessary follow some recommendations:

• Use only filtered water to boil in the kettle.
• Lightly formed plaque is easier to remove. Therefore, you should clean the device whenever possible once a month. Ideally, once a week.
• Do not keep water in the container. It is better to leave the kettle dry, then it will last longer.
• It is recommended to wash the kettle daily.
• Boil water periodically with citric acid. You can simply leave the kettle for several hours with an acidified solution.
• If you find that the heating coil or disc has changed color, you should consider purchasing a new kettle.

See how to efficiently clean the kettle from scale in the next video.