Features and selection of faucet with swivel spout for the bathroom

The mixer with a swivel spout is a suitable solution for the bathroom, in which the bath adjoins the sink. In this case, it is possible to do just one crane for the entire room. Let us consider in more detail all the nuances of selecting a rotary structure.

This is the most convenient type of spout even for one bowl of sink. Typically, the angle of rotation of the device is 120-140 degrees, there are models with a rotation of 180 degrees. Most often, swivel faucets with a long spout are found - this type will be convenient for the bathroom and sink. This type of device will save money, because you do not need to buy an additional faucet for the washbasin.

However, the rotatable version also has its drawbacks. So, during use, frequent turning actions weaken the connecting mechanisms, therefore such a device requires periodic repairs.

The built-in crane often has a low spout, not so many among the models of rotary mechanisms, but usually these are very durable products that can save space. There are built-in faucets single handle, which are easy to manage and quite maintainable, however, they often have to update the o-rings. Another option for built-in mixer - faucet with thermostat. This interesting model automatically controls the flow and pressure of the water, and its main disadvantage is the high price.

This swivel spout is mounted on the side of the bathroom. These are always long, comfortable designs. Mostly presented in brass and bronze models, stainless steel is also common. Many products are coated with chrome-nickel material, so care for such an instance is simple, lime is cleaned quickly and easily.

If a faucet with a swivel spout is mounted on the wall, then place it at a level of about 20-30 cm from the edge of the bathroom. When choosing the length of the spout, make sure that the flow does not fall on board, namely in the bath.

Typically, such bathtubs already have slots for mounting the tap, but if necessary, they can be performed independently.

The main recommendations for the use of a slewing crane relate to the exclusion of its useless use. That is, you should not once again turn the mixer, if this is not necessary, otherwise the mechanism will quickly become unusable and "loosened." And although swivel structures are usually easy to repair, you should often not resort to the help of tools. In order not to constantly wipe the wet floor, on which drops are deposited when turning the mixer from the bathroom to the sink and vice versa, turn off the water before turning the tap. It takes a few seconds, but the floor will always be dry.

To make the tap look aesthetically pleasing in the bathroom, look after him. The specifics of care depend on the type of material. Typically, cleaning requires only water, a sponge, napkins. Microfiber fabric is good, its structure does not scratch the surface of the product. After each wash, wipe the tap dry. For a more thorough cleaning, use special products that gently eliminate dirt without leaving any signs of damage on the coating.

If you select a faucet at the edge of the bath, then pay attention to the push-button switch for the shower. Usually they are mounted in the mixer body. This is a simple and convenient mechanism. An alternative to it could be a cartridge switch. It is presented as a separate element, and its main advantage is the ease of replacement in case of breakage.

As for the material of the mixer, then give preference to brass and steel - these are the most high-quality and durable products. When buying ceramics, remember that this is a beautiful, but rather brittle material, and the most affordable silumin has a very short service life. The enamelled version is the easiest to maintain, on which there are no stains from touching fingers and splashes. But the chrome coating significantly increases the stability and hygiene of the product. When choosing a swivel spout, study the angle of movement of the specimen and the length of the crane.

In the video below you can find a master class on installing a rotary mixer.