Pedicure machines: tips for choosing and using

Feet care at home for women is quite easy, but it takes time, effort, certain knowledge and skills. A pedicure machine is one of the devices that solve the problem of rough skin. How to choose it and best use it, we will tell in this article.

There can be many problems with the skin of the legs and nails. These are ordinary corns, and ingrown nails, and corns, and rough heels, and even warts. A pedicure machine does not solve all these problems, but, of course, can significantly alleviate the condition of the skin. This tool looks like a scraper with a blade. Using it is quite easy, it cuts off unwanted coarse, dry skin from corns and heel areas.

In today's market, the device is sold in the form of many models with different lengths and thicknesses., with various blade and design. Most often, a grinding file and a set of interchangeable blades come as a gift for the machine.

A machine can save you from many problems with your feet, but only if you use it correctly. Below we present you a brief instruction.

• Preparing the feet at home. The feet need to be prepared in advance by steaming the skin on them. If you do not have salt for steaming your feet in the bath, then you can use ordinary baking soda. A hydrogel will do the job best, but again, only if you have it at home. For the procedure, 20 minutes will be enough.In the presence of especially dense and coarse tissues on the skin, before soaking, it is necessary to apply cream to these places.
• Tool preparation. All this stage consists only in the correct fixing of the blade on the machine. The blade is pressed against the latch and latched. This also includes the stage of processing the tool, if, in addition to you, someone else uses it.
• Antiseptic foot treatment. This is done so that in case of accidental cuts, an infection is not brought into the scratch.
• Convenient location of the feet. It is very important. The razor should be at an angle of 45 degrees relative to the surface of the foot. From this angle, one should begin to slowly cut off the skin. You need to take a pose in which it would be easy for you to reach the entire surface of the foot. Skin should be cut off without pressure, with light movements, gradually.

• Machining corns. After you cut off the coarsened tissue, proceed to treat the corns. The skin from them must be cut separately and very carefully, if possible pulling it. At the slightest discomfort, redness should stop working. In no case do not bring to bleeding, then the wound will then hurt for a very long time. Better to do than to overdo.
• Grinding file processing. This is required in order to remove all roughness and roughness of the skin.
• Moisturizing and soothing the skin. The performed procedure is stress experienced for the skin, so after it you need to make a foot bath with oils or herbal decoctions.
• Applying cream. Feet should be lubricated with a moisturizer with a high percentage of fat content.

First of all, you need to understand well that the use of the machine is not a panacea for all skin diseases on the legs. It helps well only when removing dead skin and dry corns. And for a better result, you will need not one session, but 2 or even 3 with some frequency. It’s important not to overdo it. Too much skin will become more sensitive and prone to mechanical injuries.

After completing the procedure, it is necessary not only to rinse the machine, but also to disinfect it. It is necessary to disassemble it and do the procedure with each of its details. At home, alcohol or another similar liquid is quite suitable for this. It is important to wipe the machine dry after washing.

First you need to know how the device looks. It consists of three parts: a holder head, a blade and a handle. It should be noted that such a machine is only suitable for treating keratinized skin; it cannot be used for other purposes.

Below is a list of companies manufacturing machine tools and their brief characteristics.

• Machine with the characteristic name Titania. It is inexpensive, as the head is made of stainless steel, and the handle is made of plastic. Despite this, it is distinguished by European quality, strength and relative durability with proper care. It may not always be effective when treating too rough skin.
• Machine tools from Staleks. This company produces professional pedicure tools. They are made of stainless steel, and have a classic shape for machine tools. The blades are easily replaced with new ones.

• Pedicure machine Beter. It is also distinguished by European production, has a non-standard shape stainless head and a plastic handle.
• Another good product is Zauber. The tool is completely made of stainless steel. It has one feature - its blades are made of titanium steel, which will not become dull and rust over time.
• The machine for professional masters of pedicure Olton. It is made of medical steel. It requires special multi-stage processing, but differs in good quality and durability.

Before you start working with the pedicure machine, it is important to know that it carries out only “cosmetic repairs” of the skin of the feet.In this case, corns and corns will soon appear again, since the reason for their appearance lies in the medical field. The machine is a salvation for those who have moderately rough skin, which sometimes they want to “lose” in order to feel lightness in the legs.

There are quite a few opponents of using the machine. Some refer to the fact that they could not “get their hands full” and cut their heels, others that such procedures are addictive in the skin, after which other procedures become useless. Be that as it may, nobody canceled caution and accuracy in this matter, as in any other. This procedure can always be gradually abandoned at any time.

Nevertheless, the machining of the heels with a machine tool is gaining more and more adherents every year. Many users have described that now you do not need to go to salons and spend money on the road and the work of the master. Learning the technique is not difficult at all, you only need patience and perseverance. Most of the girls are happy with the fact that if they suddenly “turn up” the date, then you can not get nervous and not pull the master, who is busy for a week in advance.

Overview of the pedicure machine "Profi" in the video below.