Features of replacing foam in the couch

Any type of upholstered furniture wears out over time and needs reconstruction. On the sofa, scuffs, dents, dips can be found most often on the back and seat. If the frame of the interior item is strong, then in order to return it to its original appearance, it is worth changing the foam rubber.

If the foam rubber in the sofa has become unusable, then it is not necessary to change the furniture to a new one. In this case, it is better to replace the filler. Quickly and efficiently, you can return your sofa to softness and comfort by contacting specialists. However, it will be much cheaper to do all the work yourself. For this, the owner of upholstered furniture will need to have the necessary tools and materials.

Repair of upholstered furniture involves not only the replacement of foam, but also the repair of malfunctions, as well as the restoration of the upholstery, if necessary. According to the advice of professionals, it is worthwhile to independently replace the foam of the sofa in the following cases:

• the furniture has been used for a long time and has become an uncomfortable place to relax;
• the sofa has a factory defect or its filler was initially of poor quality;
• with excessive softness of furniture.

It is possible to independently replace a foam filler only in case of self-confidence, otherwise it is better to entrust this responsible matter to professionals.

If you want to maintain the attractive appearance of the sofa after replacing the filler in it, it is worth choosing the right material.

The thickness of the filler sheet should be at least centimeters. The optimal density indicator is considered to be 30 kg / m3. It is from these characteristics that the life of the sofa depends.

If thin foam rubber is selected, which is characterized by excessive softness, then after a few months it can be sold. Then you will have to change the filler again. When buying too dense material, upholstered furniture will be uncomfortable for sitting and relaxing.

When choosing a foam rubber for replacement, it is worth considering its brand and quality. In the marking, the first numbers are responsible for density, and the last for stiffness. These indicators are responsible not only for the life of upholstered furniture, but also affect its price.

Typically, foam sheets have standard sizes with a width of 100 centimeters and a length of 200 centimeters.

The next filler may be an alternative to foam rubber.

• Spring unit - long-term, reliable, rigid filler with orthopedic qualities.
• Polyurethane foam - It is an environmentally friendly, hypoallergenic, resilient material that withstands heavy loads and does not accumulate dust.
• Synthetic winterizer characterized by environmental friendliness, hypoallergenicity, elasticity and affordable cost.
• Periotek does not cause allergies, the peculiarity of its fibers does not contribute to the development of pathogenic bacteria. The material is comfortable, safe for health and quickly restores shape.
• Stratofiber - This is a filler in which ticks and microorganisms do not multiply. Hypoallergenic, long-term filler is not capable of decay.
• Felt, a padded jacket extends the life of the sofa, tight, wear-resistant, regulates heat and is inexpensive.

Step-by-step replacement of foam rubber upholstered furniture with your own hands includes the following steps.

1. From the sofa, it is worth disconnecting the sides and back.
2. Remove the transforming mechanism.
3. Inspect the frame. If necessary, make additional fastening of plywood at the bottom. For this purpose, it is worth using nails or glue for furniture.
4. Remove the upholstery from each element of upholstered furniture, for this you can use an anti-stapler or a flat screwdriver.
5. The old upholstery should be washed and ironed to maximize its original appearance. If you plan to upholstery the sofa with new fabric, then you will need to make patterns on it.
6. Cut foam should be placed on the wooden plane of each part of the sofa. After which the material is firmly pressed and fixed with brackets. If you want to make the back more voluminous, you can add an additional layer of foam rubber to it.
7. In order to ensure the density and evenness of the fit of the filler, each element of furniture should use a canvas.
8. Carry out a tight fit process. To do this, it is worth pulling the material and securing it with a construction stapler.
9. The collection of all the components of the sofa into a single whole.

Foam rubber is considered the most common filler for upholstered furniture.

A workshop on changing foam in the couch can be found in the video below.