A blouse with a shuttlecock on his shoulders is back in fashion. Lush decor will be that highlight in the image of girls, which will attract the attention of everyone around. Designers model the blouse as you like. It can be a blouse with a flounce, which is sewn in the center of the shelf.
A blouse with a shuttlecock on her shoulders looks very sexy and seductive. You can sew a belt to the product. In this case, a combination of parts from 2 fabrics is acceptable: a belt and a shuttlecock - contrast fabric, a shelf, a back and a sleeve - the main fabric.
Which material to choose?
In the store you can buy a piece of silk, chiffon, satin, cotton, linen. Each fabric is amazing in its properties and appearance.
Atlas will make the model elegant and delightful. It is not hot in the summer and warm in the cool. Flowing silk and chiffon are easily draped and will give the future product an equally stunning look.
Silk quickly crumbles: it needs to be processed on an overlock.
Cotton, linen have good hygroscopicity. Cotton is subject to shrinkage when washing, so a piece of fabric should be taken in view of this drawback. The fabric is selected in any color and pattern.
We sew an open model with a shuttlecock
How to sew a beautiful addition to shorts or jeans? To sew a blouse, take a ready-made pattern.
The pattern is as follows. The length of the blouse can be taken at your discretion. As you can see from the drawing of the patterns, everything is quite simple. The construction of the pattern and cutting resembles the lessons of mathematics and works.
The following stages of product manufacturing:
- Sew the sides of the product, leaving room for an armhole. Open open side sections with a zigzag stitch.
- Two armholes must be closed in one of the following ways: it can be a hem, a slanting inlay or a special seam of processing that is present on the sewing machine.
- Slanting edging is cut from the same material.from which the product is sewn. Its width is 3 cm, length is the measurement of 2 armholes. It is necessary to cut the pickup at an angle of 45 degrees. It can still be bought at the store.
It is important that it should be as suitable as possible in color to the product. This will help to avoid problems with molting during washing. The product will be beautiful and without streaks after repeated washing.
The following actions:
- Grinding is drawn on the armhole and sewn inside the product. The width of the stitching is 3 cm. From the inside of the blouse, the stitching can be sewn with hidden stitches.
- Next, you need to prepare the shuttlecock. Hem the underside of the decorative element on the machine with a seam in the hem with a closed cut. On the other side, lay two parallel stitches (without fastening) with the widest stitch on the machine. Shuttlecock to pick up the width of the top of the blouse. Why do we need such preparation for finishing? Ready-made, it will have beautiful magnificent assembly.
- Take a shuttlecock to the blouse to the upper edge and flash it. The wrong side of the part should lie on the front side of the product.
Final sewing operations will be:
- Cut a bar with a width of 3-5 cm. The width of the strap must be selected to match the width of the gum. The length is the length of the top of the blouse.
- First of all, on the bar you need make a slot for the elastic. It can be sewn on a sewing machine with a special buttonhole foot. Cut the finished slot with manicure scissors or a ripper.
- The bar is doubled and bumped into the product. Sew the bar on the machine. Insert the elastic into the bar and adjust its length.
- Hem bottom products.
Modeling a sleeveless blouse
The shuttlecock on the blouse is so beautiful that you can decorate the blouse as you like. For example, sew a shuttlecock along an oblique line along the entire length of the shirt. The decorative element captures two parts of the shelf. In the photo you can see that it will be a classic office shirt with a turn-down collar without sleeves.
On the pattern of the finished shirt, you need to make some changes:
- It is necessary to deepen the armhole.
- On the sides of the back and the shelf from the lower edge down, retreat 1.5-2 cm and draw a new armhole. Open shirts to change a little. The shelf needs to be cut out without a cut along the line of the fastener.
- Button fastener should be on the bar.
Let's build the shuttlecock. The decor has beautiful tails. It needs to be carved in a spiral. A part may have a different width. It all depends on the desire of the mistress of the blouse. Here it is recommended that you first cut it out on paper, cut it out and attach it to a future product.
The more often the product is tried on at a certain sewing stage, the better. The finished product will be free of defects. An example for the construction of a shuttlecock is the following photo.
Sleeve model
Based on the pattern of a blouse without a collar, you can sew a blouse with a flounce on the shoulder.
Changes to the pattern will be as follows:
- The shoulder length is divided into two equal segments.
- On the line that runs through the lower edge of the armhole, postpone the following segments - 15 cm, 11 cm.
- The resulting points are connected by a line.
- Cut the shelf along the line.
The shuttlecock is sewn with one seam when assembling the shelf.
Straight chest flounce blouse
Another design idea. The basis of the pattern is a blouse with a short sleeve without a collar. Around the middle of the armhole, draw a horizontal line to the middle of the ledge. The finished shuttlecock will pass at the level of the chest and mid-length of the sleeve.
This is a continuation of the previously proposed blouse.
The second variant of clothing is suitable for creating incomparable images for work, a date or a gala reception. Beautiful decor will add charm to the look.
There are several ways to simulate the above blouse.
To the pattern of a blouse with a sleeveless frill, you can build a drawing of the sleeve (the pattern is taken of the above blouse).
2 measurements are required for the drawing:
- The length of the sleeve. Apply a centimeter tape to the shoulder, then the tape drops to the level of the brush.
- Armhole length. Measure must be removed from the drawing shelves.
- Sleeve bottom length. It is equal to the semi-girth of the hand. But! It is also necessary to add to this length the length of the free entry of the wrist. All these measurements can be taken at your discretion, taking into account the insertion of elastic at the edge of the sleeve.
The drawing should look like this (see photo below). In appearance, the pattern of the sleeve resembles half a trapezoid. Cutting sleeves occurs in the middle of the selected material.
To cut a blouse with sleeves, you need to know your size. Find a finished pattern in fashion magazines and sew it, following the general recommendations. An example of a pattern of a blouse with a shuttlecock is shown in the photo.
The style of a blouse with a flounce is an interesting idea for girls with a slender waist. If the girls follow our instructions exactly, then by the summer you can surprise all your friends with a chic new thing. A blouse with sleeves is an option for cool weather.
In the piggy bank of needlewomen, another master class in sewing blouses with a shuttlecock on their shoulders.
