Skirts

How to wash and iron a pleated skirt?

How to wash and iron a pleated skirt?
Content
  1. Washing features
  2. Subtleties of ironing products
  3. Crease Recovery Methods

A pleated skirt is an elegant and romantic attribute of a women's wardrobe. It looks great on any figure and allows you to harmoniously combine it with many things. However, in order for the product to always look beautiful and attractive, it must be properly looked after.

Washing features

One of the main steps in the care of pleated skirts is washing.

The process has its own nuances and is carried out according to certain rules. Before you start to wash the pleated, it is necessary to conduct a series of preparatory measures. To do this, put the skirt on a hard, even surface, smooth out all the folds and fold them according to the bends.

Then you should take a thin needle, thread a silk thread into it and sew each fold from the waist to the hem of the hem with large stitches. After the product, it is not necessary to twist it very tightly and place it in a nylon stocking. In order for the skirt not to fall out of the makeshift cover during the washing process, the end of the stocking should be tied.

It is recommended to wash a pleated skirt in your hands using liquid soap and conditioner. The temperature of the water in the basin should not exceed 40 degrees, otherwise the skirt can become very deformed and the folds will straighten.

During the washing process, it is not recommended to strongly affect the product; in case of severe contamination, it is better to leave it for 10 minutes in a soap solution. It is not recommended to keep corrugated things in water longer: this can lead to straightening of folds and will require taking urgent measures to re-form them.

After the thing is washed, you need to rinse it in several waters, adding air conditioning. Then you need to get the skirt out of the water and gently hang it by the belt.Squeezing the product is not recommended. Before the machine wash, the skirt is also stitched and placed in a nylon bag, after which it is scrolled using the manual or delicate washing modes at low speeds. Spinning the product in a centrifuge is also strictly prohibited.

Subtleties of ironing products

The method of ironing pleated skirts depends entirely on the materials from which they are made. So, it is better to iron a synthetic or woolen school model from the wrong side, laying wet gauze on top. However, before steaming the folds, you should familiarize yourself with the information on the label, since some things made of polyester should not be ironed in principle. In this situation, you can do without a steamer and use the effect of a steam bath.

To do this, you need to hang the corrugated skirt over the bathtub on a clothesline or shoulders and turn on hot water for 15 minutes. The door to the room should be tightly closed. After the bathroom is filled with steam, it is necessary to wet each fold gently with wet hands and leave the product on a rope until it dries completely. With woolen models, everything is much simpler: they are steamed well through cheesecloth, and their folds do not lose their original forms for a long time.

Chiffon products are considered the most difficult to iron and require special care and accuracy. This is due to the fact that a drop of water accidentally falling onto the material leaves a stain after itself, which can only be removed by repeated washing. It is recommended to iron such products without using steam, without pressing the iron. After the chiffon corrugation is ironed, it must be left alone for 10 minutes. During this time, the fabric will cool and take the desired shape.

A knitted skirt often has a lining, which, when ironed, is twisted and ironed separately. To iron knitted, as well as corduroy, models, it is necessary from the front side through a damp cloth. However, you should not work too hard with an iron, and the process of ironing such fabrics should be more reminiscent of steaming than smoothing. After the thing is ironed, it should be hung by a belt on a rope and inspect all the folds. If you find problem areas with fuzzy bending lines, you need to correct the situation using a vertical steamer.

Silk patterns are ironed inside out through gauze. As with the chiffon, we must not allow drops to fall on the material. This can lead to burning of wet areas or to discoloration in these places.

The dermatine skirt should be ironed from the wrong side through wet gauze at an iron temperature of 35 degrees. Smoothing should be done carefully, barely touching the material, moving from the belt to the hem of the product. If there is a steam generator or a function of vertical steaming of the iron, then you can use them by holding the device at a distance of 10-15 cm from the product. The steam bath effect also smoothes out creased creases on faux leather products. To do this, you need to hang the skirt over the bathtub, turn on the boiling water and straighten all the folds manually over the steam. In the same way, you can straighten a crumpled tulle skirt, however, its stay over steam can be reduced to 5-7 minutes. The material is sufficiently malleable and quickly takes its original shape.

Crease Recovery Methods

Often after long wear or unsuccessful washing, pleated pleats straighten out and the item loses its former appeal. However, throwing away such a product is not worth it, as there is an effective way to return it to its original appearance at home. To do this, grate half a piece of laundry soap on a coarse grater and dissolve it in 1 liter of warm water. Then, to the resulting composition, it is necessary to add egg white, 1 tbsp. l vinegar and 1 tsp. starch. All components must be mixed well and placed in this solution with a soft cotton cloth or thick gauze.

While the material is in solution, straightened folds should be re-formed and wound with a thin thread with frequent stitches. Then the skirt should be laid out on an ironing board previously covered with a dry, clean cloth, and straighten all the folds. Next, you need to slightly squeeze the soaked gauze and carefully cover it with a skirt. After the folds are ready for ironing, you need to take a large sheet of paper, lay it on top of the gauze and start ironing.

The use of a paper sheet is a prerequisite for performing this procedure. Otherwise, the egg white present in the solution will begin to stick to the iron and quickly spoil the sole.

After all the damaged folds are re-formed, you should remove the fabric with paper and leave the product on the board for complete drying. Then the skirt should be hung on a coat hanger or rope and left for another couple of hours.

Careful handling and competent care for a pleated skirt significantly increase the product's service life and allow it to maintain its original appearance for a long time.

A few helpful tips on how to stroke a pleated skirt are provided in the video below.

Write a comment
Information provided for reference purposes. Do not self-medicate. For health, always consult with a specialist.

Fashion

beauty

Relaxation