Stunt bikes: varieties, brands, choice

Cyclists conquering the surrounding area, performing dizzying maneuvers, immediately attract attention. To do this, use specialized equipment that is superior to conventional bikes. If you want to buy it, you need to understand the types of such bicycles and their features.

There are many modifications of extreme types of equipment. But among them stunt bikes stand out especially. Their specificity is, of course, associated with design features. As a result of a number of innovations, a product was obtained that:

• allows you to make stunning jumps;
• makes it possible to overcome dizzying obstacles;
• at the same time makes exceptional demands on the safety of riders.

If the bike is called BMX, then it is small in size. This ensures complete control over the ride, combined with increased maneuverability. The frame is necessarily underestimated.

The average wheel size is 20 inches. Thanks to the nuances described, well-trained cyclists can climb the railing, parapets and ride in other places where otherwise you can not get. Describing what a good stunt bike looks like, you need to mention one more thing:

• sturdy frame;
• rigid fork;
• increased thickness of the dropouts;
• gear ratio of stars optimized to achieve maximum speed;
• rims with 3 cameras;
• wide base pedals;
• frequent use of gyrotor.

There is a strange opinion that stunt bikes are only BMX. In fact, this kind of bike is really designed for risky maneuvers and all kinds of acrobatic exercises. But tricks can be done on trial bikes which are now rapidly gaining popularity. But still it makes sense to start with BMX. Just the first time they began to be used for cycling motocross.

Motocross has experienced a rise and fall, now almost no one is interested in it. But then there are new disciplines and methods of riding, for example:

• Bmx racing - racing at high speed on asphalt with overcoming obstacles;

• Street-bmx - Driving along an ordinary city street, accompanied by a demonstration of tricks;

• Flatland-bmx - Cycling acrobatics in flat-coated areas;

• Dirt-bmx - competition on clay using springboards;

• Vert-bmx - stunt races in the form of the letter U.

For jumping, that is, for Street style, choose bikes with a narrow steering wheel and one gear. The rear wheels have a wider tire than the front; The choice between heavy or light frames can be made as you wish.

Dirt enthusiasts will only need heavy bikes with a rear brake. Common features of such vehicles are brake levers and 24 inch wheel diameter. But if these signs are not always present, then reinforced rims and a mass of spokes are necessary. In any case, the frame is made of chromium-nickel steel.. This allows for increased strength.

If you want to ride in the style of Vert, only bikes with smooth tires are useful. The vehicle itself is sturdy and heavy, equipped with a rear brake. However, when riding in a medium-sized ramp, the front brake can also be used. 4 pegs are provided. Thanks to them, optimal glide is ensured when riding along the edge and on the railing.

Flat skiers use bicycles, which are almost unsuitable for riding on city streets. The mass of the bike is selected individually. Its rims are equipped with a large number of spokes. There are versions with 1 or 2 brakes, and on large pegs the surface has pronounced ribs. Smooth tires are required.

Trial bikes are similar to BMX Street, as they have the same goal - to help overcome jump barriers. Most often used models without a seat. Brakes can be made on either a mechanical or a hydraulic basis. The average weight is 9.5 kg. But by itself, each athlete picks up transport to his liking.

At the front, only a classic bicycle fork is used. The mass of double suspensions can reach 20 kg. Due to the minimum number of vibrations, such a bike is recommended for high-altitude jumps on competitive races.

If there is little or no experience, it is best not to consider options without a saddle. Then it is much more correct to use a hybrid bike. A hybrid bike combines the features of a road and mountain bike. It is characterized by increased frame strength and enlarged (sometimes up to 28 inches) wheels. The steering wheel is the same as on a mountain bike, an ordinary fork is used for depreciation.

As for track bicycles, they look like classic road models. However, they are made without brakes. A special mini-wheelbase allows you to increase the rigidity of the frame. The cross-section of the wheels is 0.622 or 0.7 m. Single-tube bicycle tires are worn on the wheels.

Since the track canvas tilts, the carriage of the track bike must be lifted. This allows you to increase the gap between the lowest position of the pedals and the coating of the training tracks. The ends of the rear feathers resemble a horizontal neckline - therefore, you can influence the tension of the chains by changing the location of the axis of the rear wheel.

A superficial acquaintance with the varieties of track bicycles shows that first you need to decide on the desired riding style. Those who want to perform tricks on flat surfaces are better off with small, lightweight versions with tires without a tread. Racers are advised to choose lightweight bike. At the same time, he must have powerful brakes and a tread with a large pattern. The trickier the tricks, the higher the required strength of the bike.

A slightly different approach is characteristic in the case of the choice of trial bikes. They are evaluated primarily by their mechanical strength, because such bikes must withstand the strong load that occurs when hitting and jumping to any height. Mountain double suspensions are recommended for high jumps. It is their design that is designed for an extremely comfortable landing, as far as possible in such competitions.

People engaged in der jumping sometimes use fat bikes. But for beginners, it’s better to take a specialized bike in order to immediately develop the right technique.

It should also be understood that no perfection of the bike and no experience will not do without personal protective equipment.

A frame heavier than 3 kg is practically unacceptable for a stunt bike. This severity will greatly complicate the exercise. Only in the initial stages of preparation can you use options with a heavy frame. It is also necessary to check the characteristics of the materials so that they have an optimal balance between weight and strength. Rostov is selected along the upper pipe, and strictly personally for each user.

The handlebars for BMX bicycles may consist of a bent pipe and a bar. But there is another option in which the crossbar is complemented by independent crossbars. Sometimes the crossbar is a little understated. Track pedals rarely differ from standard pedals, but sometimes they are larger. The lightest pedals are made of magnesium alloys, but aluminum parts are considered a more universal solution.

Beginners should buy cheaper bikes, if only they were pretty strong. At first, the risk of falls is very high. Important: it’s worth checking how good a particular bike is for itself. It is foolish to acquire it without doing at least 2 or 3 simple tricks. Particular attention should be paid to the quality of the welds on the frame.

Company BSD can offer a very wide range of modifications, and also supplies excellent spare parts for them. This is a well-deserved British company that you can 100% trust. Judging by the reviews, very good stunt bikes supplies and Duo. This American manufacturer also ships solid components.

And here Federal evaluate inconsistently. This company is famous for marketing moves. However, negative reviews about her products are almost never found. Fans of true German quality should choose Stereo bikes. These same bicycles stand out and design features. At the very beginning of a career, you can choose products in the configuration BMX by Giant, GT, Stels.

See how to choose a good stunt bike.