You need to choose a corner bathtub with a length of 150 cm no less carefully than any other plumbing product. It is very important that it be made of good material and have all the necessary functionality. But you will have to deal with the required width of the structure, and with the depth of the bowl, and with other necessary nuances.
Features
The conversation about corner baths is appropriate to start with the fact that they look very beautiful and can significantly improve the indoor environment. The angular design makes it possible to properly organize the space. And even a limited total area in this sense will not be an obstacle. The situation will look much richer and more elegant than when using traditional direct plumbing.
It should also be noted that:
the corner bath can be installed not only close to the wall, but also in the middle of the room;
it will save valuable square centimeters without loss of usable volume;
in the diagonal bathing bowl it is convenient to wash and take a shower for almost anyone;
the variety of specific forms and designs is very great.
The choice
Much depends on how competently people choose a corner bath. The simplest models can save quite serious money. However, not everyone is ready to give up hydromassage and other options. Of course, in any case, you need to go to a large plumbing store (preferably a network one) to buy. It is advisable to purchase it on the Internet directly from manufacturers.
Domestic baths are relatively good, however, the products of Italian and German factories are still a cut above design characteristics.
It is necessary to find out in advance the sizes of all plumbing connections in the bathroom. Thus, buyers will save themselves from misunderstandings and problems that could easily be avoided.
Having dealt with these points, we can proceed to the selection of a suitable structural material. Traditional cast iron is still too early to discount. Yes, it is heavy, relatively fragile, but it is durable and retains heat perfectly.
More modern acrylic products have a lower mass. It will be much easier to bring them home and lift (if necessary) to the upper floors. Since acrylic allows you to do without enamel and paint, there is simply nothing to crack on it from temperature extremes. The acrylic mass is also plastic, which allows you to create the most bizarre shapes in production. But naturally, that you will have to pay extra for the original design, and the farther from the typical forms the idea is, the more costs will be.
Stainless steel is lighter than cast iron and stronger than acrylic. She would be the best choice, if not for high thermal conductivity. Even those who wash themselves quickly find that the water is cooling.
In addition, when it hits a steel surface, the water stream makes a loud noise.
Therefore, you will have to consciously disturb the peace of other people or use a steel bath only at certain hours.
Tall bathtubs (over 50 cm) are comfortable for adults. But young children use them is not too comfortable and even dangerous. The width is selected so that the most complete person in the family can calmly swim. At least 5-7 cm of free space should remain between the shoulders and the inner walls. Then it will be possible to move freely in almost any case.
Additionally, it is worth considering:
total weight of the structure;
presence of armrests or refusal of them;
angles of inclination of the sides;
availability of disinfection options.
Specific models
Quite large sizes - 150x100 cm has a right corner bath Triton Kylie. It is made from first-class acrylic in a domestic factory. The height of the structure reaches 63 cm. Installation is carried out only separately (not close to the wall), the use of non-slip coating is provided. The thickness of the acrylic sheet is 0.5 cm, aero massage equipment will be installed upon customer's request.
You can take a closer look at 150x90 cm models. A striking example is Ravak Rosa 95 R. This design is designed to be equipped with a hydromassage unit. The height of the bath is 43 cm. In addition, you can get air massage and chromotherapy systems. Other features are as follows:
complete overflow;
anti-slip coating is not used;
diameter of regular drain - 5.2 cm;
at the request of the customer, they will install an underwater lighting system;
the thickness of the acrylic sheet is 0.6 cm;
The design is made in an impeccable modern style.
Among the bathtubs measuring 150x80 cm, an acrylic model is worth mentioning. Royal bath azur. Such a design can be made in the right and left versions. The overflow is located at a standard level. The height of the bath is 43 cm. The thickness of the sheet is 0.5 cm.
When selecting a device with a size of 150x70 cm, it is useful to pay attention to Am. Pm Sense. This bath will suit owners of small-sized country houses and city apartments. Acrylic is prepared using a unique vacuum molding technology. Thanks to the internal stiffening ribs, it is most convenient to sit in the bathtub. The surface inside is smooth, and it is easy to remove all contaminants from it.
The following video provides an overview of the Ravak Avocado 150x75 acrylic bathtub.
