Choosing a 160 cm corner bathtub is simple and difficult at the same time. Simply - because there are a lot of such models in the assortment of sanitary shops. But it’s difficult - because only an attentive consumer, having understood all the nuances, will make the right decision.
Key Features
The dimensions of the bath are no less important than the material used for it or additional technical means. And the dimension of 160 cm in length is not accidental in popularity. It has long been established that with a size of less than 150 cm, it is practically impossible to take a bath while lying to an adult. At the same time, very large structures (longer than 170-180 cm) will not fit even in most apartments of new buildings. What can we say about the "Khrushchev" and even the "Brezhnev" housing stock.
It is equally important to emphasize what are the features of the angular structure, why it is better than a direct analog.
Such a solution allows you to:
provide a harmonious combination with other plumbing and with the basic elements of decoration;
limit yourself to self-assembly and not lose money, time to call experienced plumbers;
to achieve the best balance between limited external and expanded internal volume;
also achieve an intriguing, unusual appearance.
Corner baths are usually divided into:
triangular;
rhombic;
rectangular beveled formats.
Selection Guidelines
If there are no special wishes and you want the bathtub to “just work”, you can limit yourself to an acrylic design. Such a solution is convenient, practical and outwardly cozy. But it will be necessary to carefully watch that the design is made of plumbing, and not of universal acrylic. The best option for the mixer is a cascade built-in onboard. Specialists consider the suspended product only a compromise.
Turning to any real or online store, consumers find that the cost of bathtubs with the "same" declared characteristics may vary by 2-3 times. In this case, it is better to focus on the average price range. And if there is an opportunity - then the upper third of the price tag.
The fact is that cheap models are too often made from low-quality material. Subsequently, it will easily crack. Believe me, counterfeiters have learned to do everything in such a way that only specialists can identify a defect.
But still, it is worth watching carefully that the acrylic is everywhere the same in thickness. Counterfeiters may use too thin or poor material in the middle in height, at the very bottom, and in the area of the armrests. If you need the most diverse colors, you need to choose expensive designs. Cast iron and steel baths should be considered last. Moreover, steel is even worse than cast iron, although it is lighter, but too “sonorous” when struck by a water stream.
Each component of the bathroom, including a corner bathtub 160 cm long, is obliged to work for the general harmony. Only then will it be possible to create a pleasant and beautiful interior. It is useful to study in advance reviews of specific modifications and manufacturers of bathtubs.
Experienced consumers also always require quality certificates and are not only satisfied with the fact that they are shown the documents, but carefully read them. And finally, you need to make sure that the store is trustworthy in itself.
Modifications
A very attractive choice is the right acrylic bathtub 160x80 models Riho Delta. Many people will no doubt enjoy its asymmetric performance. The height of the structure is 48 cm, and the bowl will fit up to 210 liters of water.
At the request of the customer, air massage, hydromassage and even chromotherapy systems will be installed.
Other parameters:
- drain-overflow need to be bought separately;
- anti-slip coating is not provided;
- a coating for protection against contamination is not provided;
- acrylic sheet thickness is 0.5 cm;
- installation only against the wall;
- possible to install both on the legs and using the frame;
- pure white color.
Among the bathtubs 160x90 cm, the model stands out Ideal Standard Hotline. It is made in Germany, which in itself is attractive. By default are provided:
- 4 legs with adjustment;
- a pair of slats for fixing these legs;
- 3 brackets securing the sides.
The volume of the inner bowl reaches 235 liters. Its height (on board) is 46.5 cm. Gross weight is 50 kg. To make the bath, acrylic sheets with a thickness of 0.4 cm are used, which somehow do not look very convincing. But the width of 90 cm will suit almost all consumers. If space allows, you can even install a bathtub with dimensions of 160x100 cm. “Aquatec Betta 160” can be considered a good example. Installation is possible both in the wall and in the built-in version. Legs are not initially provided. Hydromassage is available only as an option, and the height of the bowl is 47 cm.
On how to choose a corner bath, see below.
