Asymmetric acrylic bathtubs: varieties, selection tips

There are many types of plumbing equipment that deserve attention. But even against this background, acrylic bathtubs with an asymmetric shape stand out favorably. It is worth knowing what they are, the products of which brand should be trusted, how to use these devices in the interior and other nuances of choice.

Even 3-4 decades ago, users did not have much choice. They could only use steel and cast-iron bathtubs in their apartments. The appearance of acrylic asymmetric baths instantly split the audience and even experts into 2 opposing camps. Some people think that this is the perfect solution for all cases, others that you don’t have to consider acrylic as a serious choice.

Creating asymmetric structures from acrylic is just easier than from metal, because it is more plastic and more convenient to use. That is why designers like this material very much. In order to increase the strength of the product, it is coated on the outside with a layer of epoxy resin and placed on a metal frame. Often on the Internet you can find lists of positive and negative properties of acrylic.

Asymmetric bathtubs appeared relatively recently, because before there was no corresponding technology. Products are made on the basis of sheet acrylic. Therefore, plus such constructions can be written:

• uniqueness of appearance (introducing peculiar features into the bathroom);
• minimal thermal conductivity (especially for those who like to take a bath longer);
• maintaining a pleasant appearance simply by contact with hot water;
• ease of eliminating not only surface scratches, but even serious holes and crevices.

The weaknesses of acrylic construction are:

• rather large sizes (an asymmetric bath will always take up more space than a rectangular one);
• excessive flexibility and deformability (true, this applies more likely to low-quality models of the budget class);
• insufficient resistance to a significant load (when "weighty" people use the bathroom).

A traditional corner bath can be considered a very good view of an asymmetric design. Such products look very beautiful and immediately add charm to the room. You can leave more room for imagination. Moreover, the angular design is also quite convenient. In such a bath it is easy to take almost any pose that is necessary when washing or taking a shower.

Please note that corner baths can be in left and right format. Defining this is easy. You just need to turn to the longest face of the sanitary ware face. You need to look on which side with respect to the observer is a right angle.

And those that are made according to an even more intricate scheme, naturally turn out to be the most expensive products. That is why experts do not recommend chasing the unique shape of the font. They advise better pay attention to the choice of varieties of acrylic. We are talking about its technical and industrial forms. Technical Type:

• used in the manufacture of bath bowls;
• serves long enough;
• resistant to wear and mechanical stress;
• relatively reliable.

But at the same time Plumbing acrylic is also popular.. It retains all the valuable qualities of the "technical" option. Due to special additives, it is possible to block the development of infections dangerous to health.

Rectangular and asymmetric acrylic bathtubs are 1.5, 1.6, 1.7 or 1.8 m long. These include models:

• 150x90 cm;
• 160x90 cm;
• 150x100 cm;
• 150x75 cm;
• 150x80 cm;
• 160x90 cm;
• 170x90 cm;
• 170x100 cm;
• 170x110 cm.

At the same time, models with a width of 0.7 and 0.8 m are quite common. These include dimensions such as 120x70, 130x70 cm, 140x70 cm, 140x80 cm. Typical depths are from 38 cm. Recommended installation depth is 60 ± 2 cm. The countdown is from the floor to the upper edge of the side. Elongated baths (1.9 or 2 m) with a width of 0.8-1.1 m can also be found. But they are sold relatively rarely. The same problem applies to all prospecting models 140x90 cm, 140x100 cm. The following parameters prevail in the corner segment:

• length 1.4-1.7 m;
• width 1.4-1.7 m;
• depth - not less than 0.4 m;
• mounting height - 60 ± 2 cm.

Oddly enough, but even the standard "Khrushchev" of the early series may be suitable for placing an asymmetric bath. Let the total area of ​​the room be about 3 m. Its dimensions will be equal to 1.6x1.9 m. Most often then they put the bath to the back, and the sink (optionally a toilet) to a long wall. If you plan to take the place also for the washing machine, it will have to be placed strictly on the left, otherwise it will not be possible to allocate even the minimum area for the passage.

You can use angular models. But it is better that they be smaller. Then placing the bath will not be any problem. Even more than that, a rather significant place will be freed up along the short wall. There you can install a sink or toilet.

Occasionally, asymmetric corner baths are placed with a long face to the wall. It can even be taken completely.Then more space will be in the middle of the bathroom, it will turn out to place everything that is required. In a square room, it is better to acquire symmetrical corner baths. In narrow elongated spaces, in contrast, asymmetric structures reveal all their advantages.

Products are quite popular. Bas brand. The assortment of this Russian manufacturer includes about 100 different models. The production process involves the use of advanced foreign equipment. Therefore, compliance with international standards is fully achieved. All modifications are designed for both integrated and stand-alone installation. The positive side of Bas is the warranty for 10 years. The cost of bathtubs will also please consumers.

Another Russian Brand - Triton. The products of this manufacturer are familiar not only in our country, but also in neighboring states. The technological process involves the use of vacuum stamping methods, which are well established. In the assortment there are many versions that vary in size. It will not be difficult to buy a decent version at low costs.

A higher level is characteristic of Polish products Kolo brand. Equipment was recently installed at his plants. Warranty periods are quite satisfactory, there are modifications of a diverse design, however, you can not find Kolo products everywhere.

From Spain are delivered Pool SPA. This company pays particular attention to the design quality of its products. No less carefully she monitors the variety of the line and its quality. By completing each model, developers take into account all the needs of the consumer.

Solid competition for Spanish products can make Russian goods Aquanet brand. The vast majority of experts say that this is the best Russian brand. It can offer a variety of products and is distinguished by the quality of the structures. Consumers will also like the variety of optional items.

In the review, one cannot but mention Cersanit. This company is one of the global leaders in the production of acrylic bathtubs. It unites Polish, Russian and Romanian capital. In Russia, it is Cersanit that accounts for a significant part of the market. The cost of goods is many times lower than that of analogues from the EU, however, economical versions are of little use for people with a large body weight.

The highest quality, according to some experts, is characteristic of Roca Products. This is a foreign brand that has transferred all production oriented towards our country to the borders of the Russian Federation. I managed to do this without losing quality. You can choose a variety of modifications.

More good products of such brands may come up:

• Aquatec;
• 1MarKa;
• Alpen.

Even if there is money to buy a sound bath of a leading manufacturer, and this is definitely not a fake, you need to consider many other subtleties. In any respectable plumbing store they can offer a very wide range even from 1 or 2 leading brands. Attention should be paid to the type of acrylic used. Models based on ABS / PMMA are, in fact, resilient plastic. But polymethyl acrylate is an organic glass with a uniform structure.

If ABS / PMMA is used, then approximately 90% of the total mass will be consumed by the ABS. In this case, polymethyl acrylate is used only for the outer layer. This combination looks good. However, wear will be quite intense. Normal operation of the bath can be no more than 3-5 years.

The reason is simple: ABS is hygroscopic. After saturation with moisture, it begins to collapse rapidly. The surface layer of PMMA will wear off very quickly. Therefore, it is advised to give preference to the most durable products from monolithic PMMA. They will work for at least 10 years under normal use.

Trust sales consultants, all decide for themselves. However, listening to their recommendations is still worth it. These people can tell a lot about the technical parameters of a bath that are not obvious to a layman.

3 layers - these are ABS, base and polymethyl acrylate. In constructions with pure PMMA and base, there are always only these 2 layers. But not always more durable construction is definitely better. It is not needed where the bath will be used only periodically. Therefore, in the country house you can choose the cheapest models.

However, the thickness of the acrylic face layer itself is critical. It can vary from 2 to 6.5 mm. Of course, the thicker the better. Do not trust the words of sellers about the fact that not enough smooth inner surface is such a high-tech development. In fact, behind the sophisticated terms and reasoning lies nothing more than a frankly low quality.

You can understand the administration of retail chains and sellers: they try to sell illiquid goods from their hands. However, the buyer should first of all observe his interest. Normally, there should not be any tubercles and bulges. Attached tightly to a good bath, the palm cannot slip. It will seem to adhere to the surface, like a clean window glass.

The layer thickness should be exactly the same throughout. Some unscrupulous manufacturers try to reinforce the ends as much as possible, while other parts do frankly poorly. Sophisticated buyers will not fall into such a trap - they will click on the bowl below and on the walls in different places. Then it will become clear how good the reinforcement is throughout.

Additional verification is carried out using a flashlight. He is pressed to the bottom of the bath. Turning on the flashlight, fold your palms together. On the other hand, from the inside, the lumen should not be visible. If it is clearly visible, then the products are of poor quality. When choosing a volumetric bathtub with high walls, it is more convenient to conduct a lantern test together.

Such checks are especially important when choosing plumbing of dubious origin or when buying in a previously unknown store. It is best to go shopping in large retail chains or in the official branches of manufacturers. But sometimes it’s worth carrying out tests, especially if you have to choose a budget segment bath.

This is what a pure white asymmetric acrylic bathtub looks like. In combination with a light wood floor and with a rich dark color of the walls, it looks extremely attractive. The mirror surface also plays its role.

An angular white model surrounded by dark surfaces may look like this. A special charm of the composition is added by the original drawing on the wall and skillful manipulations with lighting.

An asymmetric acrylic bathtub can be combined beautifully with wood-colored surfaces. Its logical continuation is the snow-white floor. Light chocolate inclusion and decorative items fit very well into such a composition.

A good alternative is to play red and white. They intertwine as appropriate as possible.

See how to choose an acrylic bathtub in the next video.