Asymmetric bathtubs: varieties, selection recommendations

For a modern person, a bath is not just a venue for hygienic procedures, but also a spa at home. A place where you can relax and unwind. It is not surprising that with the popularity of showers, most people still do not give up a bath in the bathroom. The installation of an asymmetric bathtub will help to give the interior an original appearance.

The main feature of the asymmetric bath is, of course, the shape of the bowl. Rectangular fonts are considered standard, while angular, trapezoidal, oval and round products, as well as bathtubs of complex and unimaginable shapes, are classified as asymmetric.

It should be understood that not every material, due to its ductility, may be suitable for the manufacture of asymmetric bowls. Most often, the market is represented by acrylic products, which combine a balance of quality and price.

Asymmetric baths are usually chosen in two cases - when you need to save space (option for small bathrooms) and, conversely, when the area of ​​the bathroom allows you to choose an unusual bowl option.

Thus, the advantages of these products are the ability to make the room more original, unusual, as well as saving room space. Such a bowl can be made to order, which will make the interior of the bathroom even more attractive.

That is, they can be the same in size, but the asymmetric bowl will contain less water.

Not every bath can be asymmetric. For example, cast iron products are difficult to process; therefore, cast-iron bathtubs cannot surprise with a variety of shapes. Finally, asymmetric bowls are usually more expensive than standard counterparts.

Asymmetry may vary. The most popular option is asymmetric corner baths, which are compact when placed, but quite roomy in volume. It can be either a rather small product with a side length of 150 cm, or more voluminous - with a side of a bowl of 200 cm.

Corner models are right-handed - placed in a corner on the right side of the bathroom - and left-handed (respectively, are installed on the left side of the bathroom).

Asymmetric bowls are common in the form of a trapezoid. Such models have the appearance of a 5-coal trapezoid, 3 angles of which are straight. That is, the bath has 4 equal straight sides, while the fifth side is usually made more rounded. Such a bath requires more space for placement than a corner bath.

It has elegance and special luxury. oval bath. It looks good both at the bathroom wall and in the center of the room. However, in any case, it takes up a lot of space.

At this angle, the bathtub is installed in one of the corners of the bathroom. The third side may be straight or rounded.

Differences may also apply to the presence of additional functions in the bath. One popular option is hydromassage (massage with a water stream). Baths with air massage (air bubbles provide massage action) chromotherapy (changing water backlight). Asymmetric bathtubs can also be equipped with seats, armrests and head restraints, designed for one or two users).

All bathtubs (regardless of shape and size) are made of different materials.

One of the most popular materials, characterized by durability (service life - 20-25 years), attractive appearance, affordable price.

Acrylic bathtubs made by casting are considered to be of higher quality. Options produced by extrusion technology are inferior to them in their reliability and hygiene (in many European countries such baths are prohibited).

Finally, there are bathtubs made of ABS plastic, which are only on the front side covered with acrylic. Such products are not intended for frequent use, and are suitable, for example, only for installation in the country.

The advantages of acrylic products are their light weight, low thermal conductivity (water in such a bowl cools slowly), the effect of "self-cleaning" (the acrylic surface is smooth, has no pores into which dirt would be eaten). Acrylic bathtubs can be of any shape and size.

Often, such bathtubs are not allocated as a separate group, but are considered a subspecies of acrylic products. This is due to the fact that Quaril is a material based on modified acrylic and quartz. This provides the finished product with increased strength and longer life, improved aesthetic and performance characteristics. Like acrylic, quil bends well, therefore the bowl may have any shape.

Asymmetric bathtubs made of cast iron are a rare occurrence. This is due to the fact that the material is unable to take any shape, and therefore asymmetric options are more likely exclusive. The price of such models will be above average.

It is worth noting the long life of cast iron, such a product can serve up to 50-70 years. Cast iron has even lower thermal conductivity than acrylic, and therefore the cooling of water in this more often will be even slower.

Unlike acrylic, cast-iron surfaces are more durable and resistant to mechanical damage.When collecting water, the material does not make noise (this is the competitive advantage of cast iron over steel options).

Of the "minuses" - a large weight of the product, considerable cost.

Asymmetric steel baths on sale can be found more often than cast iron. However, in terms of popularity, they are still inferior to acrylic models. Steel is easy to process, so there are no problems with giving the bowl even the most unusual shapes. However, the service life of such a product will be no more than 12-15 years. The weak point of such models, as a rule, is the enamel coating, which is cracked and peeled off.

Steel bathtubs are lightweight, but they make noise and vibrate when water is drawn. In addition, they have low thermal conductivity, and therefore the water in such a bowl quickly cools. To reduce noise and vibration, as well as improve the thermal insulation characteristics of a steel bath, helps processing the lower part of the bath with special heat-insulating materials.

Stone models are always exclusive, which means quite expensive products. The basis is an artificial stone, which, compared to natural, is more affordable, has less weight. The use of natural stone also has to be abandoned because of the radiation background it has and low hygiene (this is a porous material).

All the existing sizes of asymmetric bathtubs can be reduced to one of the groups.

The length of the bowl is 120-130 cm, such products are designed for small premises. Among the popular models of small-sized bowls, 140x70 cm variants are especially popular (there is a smaller option - 130x70 cm).

For "Khrushchev" one can recommend bowls the size of which is 140x90 cm or 150x70 cm. The smallest size is 90x90 cm and 100x100 cm. These are compact but convenient products. Bowls with a side length of less than 90 cm in most cases are not so functional and comfortable.

If a trapezium bowl is selected for a small room, then it usually has a length and width of 120x70 cm, 120x90 cm, 130x90 cm, 130x80 or 135x90 cm. As a rule, with the correct location of plumbing and furniture, bowls of these sizes fit even in “Khrushchev”.

The bowls have a length of 150-160 cm, they are more voluminous. However, they are suitable for installation in most standard apartments. The shape of such products in most cases is angular or close to oval. Bathtubs with sizes of 150x80 cm, 150x75 cm, 140x100 cm, 160x70 cm, 160x80 cm, 160x90 cm and 160x100 cm are considered standard.

When choosing a size, it is better to focus on the dimensions of the room, since when using bowls measuring 140x80 cm and 150x90 cm, they practically do not differ, but because of these 10 cm, using the room as a whole can become uncomfortable.

The length of the bowl of such a product is 170-190 cm, and the shape can be absolutely any. Suitable for installation in large areas, usually private houses. It can be quite small among large-sized bowls - 170x75 (some manufacturers do not have bathtubs of this size, but offer the option of 170x80 cm), 180x80, 190x90 cm, or real "pools" of 170x100 and even 170x170 cm.

Bowls measuring 170x110 cm and close to this fit in most bathrooms even in standard apartments. Larger sizes of the font usually involve installation in private homes.

If we are talking about a trapeze or more often a complex shape for large rooms, many people choose fonts measuring 180x80 cm or 180x100 cm. It is convenient for even a tall adult to lie there, while the width of the bath is also optimal for comfortable placement, but the product does not take up much space.

Speaking about the differences in the baths, it is worth mentioning the possible options for the depth of the bowl. In most cases, this is a depth of 47-49 cm. European models often have a depth of 50 cm. And there are also bowls, the depth of which is 42-45 cm, they are usually installed in a house where elderly people live.

In addition, the bath can be placed immediately on the floor or mounted on a special stand.

Consider the most popular brands, in the line of which there are asymmetric bathtubs.

German premium brand. The main area of ​​production is cast-iron bathtubs, and therefore most of the products are standard “rectangles”. However, an asymmetric bathtub model 2017 can be cited as an example. The silhouette is close to the classic rectangular one, but one of the long sides is more rounded. The product has an exquisite shape, instead of legs - wooden poles with moisture-resistant impregnation. Available in one size 170x70 cm.

One of the best manufacturers of sanitary ware, including asymmetric bathtubs. The main products are acrylic bathtubs, although there are rulers with cast-iron bowls. The collection includes about 200 models of asymmetric bowls, characterized by a stylish design and the highest quality. The manufacturer gives a 10-year warranty on their products. It is important to buy products in a reputable specialized store and require quality certificates from the seller, since the products of this particular brand are most often faked.

The products of this Czech brand are not much inferior to the plumbing described above, but it is much cheaper. In combination with durability, a variety of design, this has made the products popular among customers. The disadvantage can be called the fact that often the component cups have to be paid separately.

The brand is sometimes mistakenly called domestic, but it is more correct to talk about joint Polish-Romanian-Russian production. It is characterized by wear resistance, a variety of models, the quality of the products meets European standards, but the price is much lower. Of the minuses - insufficient wall thickness of the economy class products.

According to expert opinion, this is one of the best domestic manufacturers of asymmetric acrylic bathtubs. The assortment is quite wide, quality is good. The exception is very inexpensive models, their walls are too thin.

The products of this Polish brand will be appreciated by those who love bathtubs of unusual sizes and colors. Quality will also satisfy both existing standards and the demanding requirements of customers. The brand appeared relatively recently, did not have time to gain wide popularity. However, the first buyers appreciated the merits of the products, as well as the affordability of the products. While products of this manufacturer can only be found in specialized stores, if you are looking for products with hydromassage, there are not many of them in the line.

The advantage of asymmetric models is also that there are several options for their placement.

A sink is installed on the other wall if the bathroom is combined, the toilet, and the washing machine.

If the corner bath has different sides, then the longer part of the bath is placed along the long part of the wall, then on the other hand there is space for a sink, toilet or washing machine. Usually, trapezium bowls are placed on the same principle.

First of all, you should decide on the size and shape of the bowl, make sure that the bath will fit in the bathroom, it will be conveniently and harmoniously located in it. Do not forget to make sure that the orientation (and they are right- and left-handed) of the product is suitable for your room.

The best products are produced in Germany and Italy. But Chinese products can rarely be called quality.

Pay attention to the thickness of the walls of the product. It should be at least 5-6 mm. A product with thinner walls will vibrate, may deform, and will serve a shorter life. It is necessary to knock on the walls of the bath, the sound must be deaf. The walls of the bath should not be deformed when pressed.

If you purchase an asymmetric acrylic or cast-iron bathtub, make sure they have a solid frame.

Design option for a fairly spacious room. Nevertheless, the process of storing things is organized very rationally and ergonomically. This is a niche above the bathroom, a special stand on the bowl itself. The round shape of the bathtub emphasizes the classic design of the room, adding to the atmosphere of luxury and bliss.

The option of placing a bathtub of a similar shape in a small bathroom. The bathtub is located along the long side, next to it is a hinged sink and a small table. When the interior is supplemented with shelves (for example, a corner stand), towel racks and a mirror, the bathroom will become more comfortable, but it will not lose its functionality.

Another example of the fact that a small bathroom is not a reason to refuse to use an asymmetric bowl.

Stylish and cozy space, reminiscent of not a bathroom, but a spa. In fact, with a large amount of free space, such a bath can be located on any part of the room. The streamlined shape of the bathtub is supported by a rounded pouf, and wood inserts help add more naturalness and warmth to the interior.

Unusual shape of the bowl - an unusual arrangement in the room. The bathtub here is like a continuation of a comfortable and functional cabinet, so its location is not perceived as "wrong." Against the background of gray walls and dark finishes, the bathtub stands out especially, which further emphasizes its exclusive form.

A drop-shaped bowl, azure tiles on the floor and a transparent insert on the bath - all this makes the room not just a bathroom, but it seems to transfer it to the sea coast. So everything is calm and harmonious in this interior. The combination of snow-white acrylic, chrome plumbing and black finish make the room even more stylish and elegant.

You can find out which bath is better from the video.