How to descale citric acid washing machine?

In order for the washing machine to serve without complaints, it should be looked after and cleaned. In practice, there are various options for care, but many housewives choose folk methods. If you are looking for information on how to descale a washing machine with citric acid, this article will help you find the answer to your question.

Before cleaning the washing machine, make sure that these steps are necessary. You should also understand which part in the equipment should be cleaned. If you inspect the insides of a machine that has worked without cleaning for a long time, you will notice a dirty coating on the parts. As a rule, it has a solid structure, so you can’t remove it with a simple rag.

The main reason for the accumulation of scale lies in the large number of calcined salt and magnesium, which dissolve in water and settle in the form of scale on a heating element. Rust elements and mud deposits also have a direct effect on plaque formation.

Washing machines can accumulate dirt, mold and scale in several places:

• mold fungi tend to accumulate in cuffs. Such a union leads to the formation of unpleasant odors;
• scale forms on the heating elements;
• powders, fabric softeners and other additives accumulate in the inside of the machine;
• dirt, small objects often remain in the pump filter;
• rust elements, sand, usually remain in the area of ​​the inlet hose.

Due to such accumulations, after a while you will be able to find that your items after washing are not so clean, unlike previous washings. To prevent this, washing equipment should be cleaned of plaque and dirt once every three months. In the event that pets live with you, or you wear clothes made of wool, such cleaning will be required more often.

Scale contributes to the deterioration of the thermal conductivity of the metal. This leads to the fact that the machine spends much more time heating water, increasing electricity consumption. When the water is heated, the salts in it come into reaction, decomposing into two elements - carbon dioxide and an insoluble precipitate, which we call scale.

Plaque settles on the walls of the tank and the heating element of the washing equipment. Dirt contributes to wear on the intake valve, making it unsuitable for use in the future. Masters who repair washing machines report that a lot of garbage enters the machine after the water supply is repaired and the water supply is turned off.

You have the opportunity at home to find out if there is scale on the heating element of your device.

This method has a drawback, which is the difficulty in choosing the speed of the swing of the drum to evenly illuminate the heater.

To wash the washing machine from scale, you need to clean the heater itself, which is responsible for heating the water. If you neglect the procedure, soon you will need to replace the heating element. Running high temperature programs increases the chance of plaque formation. Equipment can be cleaned using tools that are sold in stores, or refer to folk methods.

Widespread is a special tool called "Anti-scale." The product contains acid that helps dissolve deposits. To use this method, you will need to enable a special mode on your washing machine - “wash without laundry”.

Experts recommend choosing a mode in which washing lasts no more than one hour. The product is poured into the department for washing powder.

Before using this method, study the possible consequences. Before filling the product into the machine, read the instructions, since an excess of powder can “eat” the rubber components. It is also worth considering the fact that acid fumes are quite harmful by inhalation. Despite these inconveniences, the tool has a low price and simple application.

If you decide to turn to a similar method, do not confuse Antinakipin with special softeners, which are added to the water with each wash. These products do not help get rid of scale.

The essence of the action of the powder is similar to the work of citric acid, but it has a slightly higher cost. Also, the difference is that the substance was developed specifically for cleaning contaminants from heating elements.

Many housewives do not want to resort to purchased means and trust the issue of cleaning products that are in every home. Similar methods are considered proven and reliable. Using home-made products that are always at hand will allow you to quickly and painlessly clear the heating element of scale.

In second place after lemon table vinegar and baking soda. These substances are used to eliminate many "accidents" in the house, including for cleaning the heater from scale. It is important to study in detail the instructions for using each of the products so as not to harm the machine.

To quickly return the machine to its proper appearance at home, you can use several methods. Read the instructions in detail to extend the life of the heating element.

How to remove limescale with citric acid:

• This method is similar to using purchased funds. You will need to drive the machine in the "idle" mode. Underwear for such a program is not required;
• put 2-3 tablespoons of citric acid in the washing powder compartment;
• Choose the program with the highest temperature conditions and a long wash cycle. Typically, the highest temperature is 95 degrees;
• if you want to enhance the effect of the procedure, include an additional rinse. Such a solution will help clean parts of small particles, which in the future may become a source of unpleasant odor;
• the procedure is recommended to be repeated every six months. Citric acid is guaranteed to remove scale from the surface of the heating element, thereby reducing your energy costs and extending the life of the parts themselves;
• keep in mind that the use of a large amount of citric acid will lead to damage to the gums and the need for further repairs;
• after waiting a couple of hours, you can get rid of the problem. This procedure is simple and almost free and returns the heater to its original, brilliant state.

How to clean a machine with table vinegar:

• prepare two glasses of table vinegar;
• pour the substance into the washing machine and add hot water;
• washing should be done in “idle” mode. The use of powder and linen is unacceptable;
• Choose the longest wash cycle;
• five minutes after the start of the program, put the equipment on pause;
• after one hour, you can continue the procedure. This method helps the cleaning solution to better penetrate all places in the tank;
• to remove the remaining vinegar from the equipment, repeat the washing procedure in the shortest cycle;
• Use a cloth dampened with a mild vinegar solution to clean the inside of the door. Pay special attention to gaskets;
• according to experts, this method has the highest result.

Descaling with table soda and vinegar:

• take 1 cup of 9% table vinegar, a quarter cup of table soda and a quarter glass of water. You will also need a stiff sponge;
• mix table soda with water and pour the mixture into the powder compartment;
• pour vinegar into the drum;
• turn on the idle mode with the longest cycle and the highest temperature.

It is necessary to clean all the elements of the washing machine, including the sealing gum.

Sealing gum likes to collect particles of dirt, mold, and also the remains of some things from pockets of clothes. For this reason, it is recommended to periodically clean this part.

How to clean the cuff:

• buy any cleaning agent. You can use baking soda or Pemolux and other substances. For advanced options that are accompanied by unpleasant aromas, you will need a stronger tool. These include Domestos, Comet.Substances containing chlorine in their composition are forbidden to use, since they can ruin the gum itself;
• Use a sponge or a cloth oiled in the selected product to clean the hatch. First you need to stretch the cuff;
• the sealing gum itself is also cleaned in a similar way;
• Remember that most of the dirt accumulates at the bottom of the hatch. Despite this, the entire circumference should be cleaned;
• Do not pull the elastic strongly so as not to damage it;
• At the end of the procedure, wipe the rubber with a damp cloth.

To prevent the appearance of scale, the washing machine must provide proper care and preventive measures. There are physical or chemical methods that can help extend the life of heating elements.

You will need to purchase a special magnetic device that fits over the water supply hose.

This method involves the use at each wash of purchased funds that actively advertise different brands. However, you risk that descaling will damage delicate tissue. In addition to this risk, additives should always be used, and their cost is quite high.

The following rules should also be observed:

• use only the required amount of powder and rinse aid. This will help you prevent surplus settling inside the equipment;
• check your pockets before washing. Otherwise, small items left behind may clog the drain filter;
• take things out of the machine immediately after washing;
• Do not leave dirty things for a long time in the drum;
• leave the door open to prevent mold.

You can find out how to properly clean the washing machine with citric acid in the next video.