How to wash stains from green from linoleum?

Despite the fact that linoleum lends itself well to washing and cleaning, it has one significant drawback. It quickly absorbs artificial colors, one of which is brilliant green - a popular antiseptic, popularly referred to as brilliant green. It is not easy to wash the stains from it, but it is quite realistic: it is enough to know what to use to effectively solve this problem.

Before proceeding with the removal of stains from brilliant green from linoleum, it is necessary to consider two most significant points:

1. get rid of pollution so that there are no traces of it;
2. Upon completion of the cleaning procedure, the floor covering must retain its structure and presentable appearance.

In other words, it is important not only to choose a suitable cleaning agent, but also to be careful when working with aggressive chemical compounds, accurately calculating their concentration. It is also worth remembering that potent agents, getting on the surface of linoleum, soften it, as a result of which it becomes less resistant to mechanical stress.

Particularly noteworthy are situations where stains from brilliant green need to be removed from worn or low-quality linoleum. Practice shows that aggressive coatings should not be cleaned.in order not to lead to their destruction.Most often, the latter manifests itself in bloating of the treated area and dissolution of the paint.

If the diamond green solution is on linoleum, the owner of the flooring should immediately take measures to clean it. To delay in such cases is not recommended, because being very corrosive, this solution is absorbed in a matter of minutes, after which its removal becomes more problematic. To wash linoleum from freshly spilled brilliant green, you need to step by step follow these steps:

• Taking cotton wool, napkin, toilet paper, soft rags or an old towel. Then it is necessary to carefully remove the spots starting from the edges, blotting out the dirt, but not smearing them.
• Using household soap or dishwashing detergent, wash the treated area well. In this case, the water temperature should not be higher than room temperature in order to avoid accelerated absorption of brilliant green in the floor covering.
• If a certain amount of spilled dye has already been absorbed into linoleum, you can get rid of it with hydrogen peroxide and 30% acetic acid, mixed in a 1: 1 ratio.

The result of the fight against green stains is largely determined by the characteristics of the coating laid on the floor. Depending on the specifics of linoleum, putting it in order may include some points.

The thickness of such linoleum is small, and therefore it is very sensitive to aggressive cleaning products. In order not to damage it, it is advisable to use alcohol or a mixture of vinegar and baking soda.

In this case, it is possible to get rid of stains by means of chlorine compounds, without any particular concern. There are two reasons for this - high resistance to wear of such linoleum and its large thickness (up to 3.5 mm).

Despite the decent thickness, such coatings have a vulnerable top layer, which is often rubbed through.

In a situation where the green stuff got on linoleum relatively recently, you can try to wipe it with cleaning products designed for upholstered furniture. Diluting them is not recommended, since in a concentrated form they allow you to achieve the best result. The selected product should be applied to the sponge, soak it in the contaminated area without rubbing on the surface, and then, after some time, rinse with water. If the first attempt to get rid of the green does not work, then the described procedure must be repeated.

An alternative solution is the mechanical cleaning of the flooring from brilliant green, carried out using a stationery eraser. This technique is ideal for removing fresh spots of medium and small sizes. The key advantage of this method is complete safety for health, and the main disadvantage is the significant complexity. It’s also worth adding that Before removing stains from brilliant green mechanically, you need to slightly moisten the contaminated surface.

Considering that linoleum repels water well, getting rid of stains absorbed into it through a normal soap solution will not work. In such cases, stronger products will help to clean the green.

The main advantage of this combination is safety for the floor covering, eliminating the possibility of damage to it.Two full tablespoons of soda are enough to cover the stains from medium-sized greenbacks. They need to be evenly distributed over the contaminated area, and then carefully pour over a small amount of vinegar.

These agents, which are excellent solvents, are able to cope with absorbed brilliant green in the vast majority of cases. To do this, it is enough to “arm” with a cotton pad moistened in them, wiping off pollution from the edges to the center. It is recommended to check in advance the resistance of the flooring to the solvent used.

You can prepare it by diluting 3 teaspoons of detergent in 50 ml of water.

In conclusion, it is necessary to wipe the trace with a kitchen sponge, using its rough side.

This compound allows you to get rid of stubborn brilliant green in 1 hour, provided that the stain is not too old. To do this, you need a cloth moistened with alcohol, tightly attached to the contaminated surface. After an hour, it remains to wipe the area to be cleaned with a sponge thoroughly saturated with soap.

Another tool that can effectively wash stains of brilliant green from linoleum is oxygen bleach. To achieve the desired result, it must be poured on the contaminated area, moisten a little and leave for about 30 minutes. Further, it remains to brush the problem area with a toothbrush and wipe the surface with a wet rag. If it was not possible to achieve complete removal of the stain from the first attempt, the procedure is repeated.

Among all types of pollution of linoleum with greenery, a special place is occupied by those that have eaten into the flooring for a long time. They are naturally considered the most complex, and therefore involve the use of the most potent means. These are the following.

To effectively remove old stains from brilliant green, it is necessary to soak a cloth with any of these products and leave it applied to the contaminated area for about 60 minutes. The final step is to wipe off the stains with a soap solution (using a small brush).

After the selected chemical is applied to a long-standing stain from brilliant green, wait 5 to 7 minutes. In the future, the owner of the flooring remains to rinse the treated area with water and carefully ventilate the room. Given that the products in question irritate the mucous membranes and skin, it is not recommended to use them without a respirator and protective gloves.

The concentration of this compound, which is optimal for solving the problem under consideration, is in the range of 3-5%.

The effectiveness of this compound is very high, however, it should be used in extreme cases due to the aggressive effect of acid on linoleum material and human skin.

If the above funds could not completely cope with the stains from green, then the most rational solution is to replace the problem area of ​​linoleum with a new one. An alternative would be to use a decorative rug to hide the contaminated area.

Finally, it remains to state that green on linoleum is a problem with many effective solutions. Thanks to them, practically any floor covering can be put in order, having achieved the desired result with the least expenditure of time, money and physical strength.

About what other additional means will reduce the green from linoleum, see below.