Wall hung toilets: advantages, disadvantages and recommendations for choosing

Hanging toilets are increasingly found in interiors decorated in modern styles. Such designs always become a stylish accent of space, but sometimes cause certain difficulties during installation and operation.

Wall hung toilet began to appear actively in homes at the end of the last century. He quickly gained popularity thanks to his unusual design, as well as the ability to free up the floor and hide communications. In fact, the very system of functioning of the wall toilet remained unchanged, but the appearance was greatly ennobled. Manufacturers sought to ensure that only the bowl and the button for flushing remained outside, and all other parts were hidden behind the false wall.

Compared to traditional designs hanging toilets look smaller and lighter, which perfectly matches the requirements of a modern style.

A wall mounted toilet has many advantages. One of the main advantages of this design is free floor, which greatly simplifies the cleaning process. In addition, the absence of a toilet leg allows you to lay out solid tile pattern on the floor, which significantly changes the perception of the interior. Emerging space also visually increases the area since the human eye estimates the volume of a room by the unoccupied space of the ceiling and floor. The same effect creates and concealment of diverse communications.

The lack of legs allows you to organize a full "warm" floor. Even installing ordinary ceramic tiles is quite simple, as there is no need to trim it. The minimalist design looks original and fits well into any interior, from classic to modern. Place on the floor allows you to place brushes, rug and other necessary equipment without any problems, if interior design allows it. All these advantages are characteristic for any models, regardless of the cost of the wall design.

The presence of false walls creates an additional obstacle from noise, which is especially important in apartments of the old building. Draining and filling the tank with liquid will also be hard to hear. Some outboard models provide an opportunity to save water, as they are equipped with a half-drain system. These designs are reliable, stable and serve for a long time.

If we talk about the shortcomings of such designs, then the main thing is difficult access to communications. If any part of the device breaks down, it will be necessary to dismantle the partition, and then proceed with the repair. And this is considered the best option, because sometimes the functional part of the toilets is walled up in the wall, including water and drain pipes. Despite the fact that the room seems large in size, in fact it becomes smaller. Usually, the need to erect a drywall construction or to integrate plumbing in the installation takes at least 15 centimeters of space.

The complexity of mounting such a design cannot be ignored. Even a person who has never done this before can install an ordinary toilet bowl, but only the master can handle the suspension system. In addition, if you want or need to replace the toilet, you will have to arrange a full repair in the toilet or bathroom. And wall-mounted toilets are still more expensive than classic floor-mounted.

All suspended toilet structures are usually divided into two main types: frame and block. The system of the frame type got its name due to the presence of a rigid and large frame, acting as a supporting base. This frame is made of stainless steel, additionally treated with a solution that protects against moisture. Such frames are universal, therefore they are used not only for toilets, but also for bidets and urinals.

The frame is attached either at four points on the wall, or a pair of bolts to the wall and the same amount to the floor. The second option is optimal, since the design has additional parts that provide stability. The installation form can be classic frontal or angular. The second is used to save free space, which allows you to place the toilet in the corner of the room. The corner installation is mounted so as to be at an angle of 45 degrees with respect to both walls and be near the sewage drain.

The block installation functions without a frame. In fact, it is an ordinary valve, on which a flat drain tank is attached. At the bottom of a simple design, fasteners for the bowl are mounted, and at the top it allows you to join with the water supply. A block-type toilet should be mounted on a wall of concrete or brick, but does not additionally require the construction of a drywall construction to hide all communications. Simply hide the drain unit and the tank in a small box, which is already fixed to the wall.

As for the form, then the most practical and convenient is considered either an oval or round toilet. The absence of corners eliminates the possibility of injury, and also greatly simplifies cleaning. An ordinary brush will cope with a rounded shape, which can not be said about any other complex shape.

Not so often, but use is still common square, drop-shaped and rectangular toilet.

Unusual design interiors require designs original form. It is necessary to mention that all toilets are divided into those that are equipped with a shelf in the bowl, and those with anti-splash system.

As for the type of drain, then in hanging toilets, it comes in two varieties. It can be circular, that is, reverse, horizontal or direct. Horizontal drain is simpler. The system works due to the fact that water enters from behind, then under pressure it washes the entire bowl and goes into the drain. The disadvantage of direct drainage is the appearance of splashes, and the main advantage is the affordable price.

Circular discharge works due to the fact that water comes from several holes at the same time. This provides better cleansing of the bowl due to the formation of a funnel, but less water is wasted. It will be possible to further improve the system by installing a double drain button.

In most cases, buyers choose between earthenware and porcelain toilet. They differ in composition and properties. The composition of porcelain includes about 47% of kaolin, that is, white clay, and the amount of this element in faience is only 20%. As a result, the first material is more durable and reliable. In addition, the finely porous translucent surface of porcelain does not absorb moisture well, which affects its resistance. Perfectly smooth walls prevent dirt from accumulating and provide easy care.

Faience, being the owner of large pores, absorbs unpleasant odors, absorbs liquids and is not particularly durable. To improve its quality characteristics, it is required to additionally process the walls with special glaze. As for the appearance of the toilets, it is the same in both cases.

There are hanging models and stainless steel. Of course, such a solution will not fit into every interior, but the design has a long service life and is very easy to maintain.

Glass toilets They look stylish, but are extremely expensive and require frequent cleaning. Plastic toilets are best used in the country, as the design is characterized by low strength and quickly deforms. Outside the city, the plumbing operation season is usually limited to the summer months, which is why polymer plumbing can last longer. Toilets made of polymer concrete look impressive and are reliable, but they are very expensive and are susceptible to acidic conditions.

All wall hung toilets are usually divided into three main categories. The first group is compact toilets, the length of which is a maximum of 54 centimeters. They are also called shortened. Similar models are usually installed in small bathrooms and toilets. The same group includes angular compact devices that make it possible to intelligently use every free square centimeter.

Slightly smaller devices are included in the second group and have a length of 54 to 60 centimeters.

The third group includes toilet bowls with a length of 60 to 70 centimeters. These models are usually installed in the homes of people with disabilities or simply in large toilet rooms. For example, such a device is suitable for a person who weighs up to 400 kilograms.

Determining the size of the toilet, it is necessary to take into account not only personal wishes, but also the ratio of the size of the bathroom. If you install small plumbing in a spacious room, then it will be "lost", and in a small room, on the contrary, it’s important not to occupy too many scarce square meters.

The classic color of the toilet, of course, is white without any patterns.

One of the most popular non-standard solutions is considered wall mounted toilet in blackthat looks extremely stylish and fits into most modern interiors. Most of these designs are made in the style of minimalism. In such toilets, the bowl has a rectangular or oval shape, and the main shades are black and white.

Any decor or protrusions on it are absent, since minimalism itself tends to laconicism and the absence of congestion. The drain button is made as neutral as possible, and in order not to attract attention, it is mounted directly above the toilet.

Classical solutions are characterized by the presence of rounded shapes and neat rounded protrusions. For more "chic" interiors, bronze or accessories with gilding are also used. The color of the toilet in a classic interior is usually snow-white - It goes well with dominant pastel shades.

For styles like hi-tech or futurismmade to choose egg-shaped bowl, lack of protrusions and a modern system with various auxiliary functions. The color of the plumbing can be either neutral, merging with the overall interior, or contrasting, allowing the toilet to become a bright accent.

Hanging toilets are often equipped with various devices. Most often, the design improves. using the anti-splash system, which prevents the spread of splashes when flushing. The center of the drain hole shifts, resulting in damping of the spray. Quite often, the surface is coated inside special glaze, which prevents the formation of plaque and rust spots.

Other options include aeration, drying and blowing. The toilet can have a bidet function or can be remotely controlled using the remote control. In addition, in suburban homes quite often installed suspended structures with heating and the ability to change the temperature of the toilet seat. The most advanced models even analyze the contents of the toilet bowl, providing the owner with information about his state of health. As you might guess the more complex the additional functions and the greater their number, the higher the final price of the sanitary ware.

• One of the most popular models of wall hung toilets is considered Gustavsberg Hygienic Flush WWC 5G84HR01equipped with a deep flush system. Snow-white plumbing made in Sweden is bezobodkovoy. The bowl itself is made of sanitary porcelain, and the seat is made of duroplast. The device is equipped with an anti-splash system and a micro-lift. The flush button is double, and the water drain is carried out around the entire perimeter of the bowl. The mass of the toilet itself is 15 kilograms. The disadvantages of this attractive design include the difficult installation and slow lowering of the cover.

• Another interesting model is considered Jacob Delafon Patio E4187-00. A toilet made in France is equipped with an oval bowl, an anti-splash system and a special anti-pollution coating. The seat is made of thermidor and improved with a micro-lift. The weight of the structure is 15 kilograms. The disadvantages of this model include the complexity of installation, as well as the need to purchase a large number of elements.

• Toilet bowl Roca The Gap 346477000 made in Spain and has several variations.Very popular is the one that is made of sanitary faience, equipped with a horizontal outlet, anti-splash and cascade discharge. The snow-white color looks particularly impressive in the presence of a rectangular bowl shape. The seat also has a micro-lift system. The weight of the toilet is 21 kilograms. Unfortunately, the width of the structure is insufficient for large users and is only 34 centimeters, and its seat is not durable and often cracks.

• Toilet bowl Cersanit Delfi Leon New S-SET-DEL / Leon / TPL / Cm-w It is a high-quality, but at the same time cheap wall-mounted product requiring installation. The Polish design is made of sanitary faience and, in addition to the traditional anti-splash system, also has a shower flush. The oval bowl is made in a classic snow-white shade. The duroplast toilet lid is equipped with a micro-lift. Chrome flush button is double. The disadvantages of this model is its lack of strength and again the complexity of installation.

• Grohe Solido 39186000 is a German model equipped with all the necessary functions. The toilet bowl is made of different materials: plastic, steel, white sanitary faience, and duroplast. Drain is carried out using two buttons. The disadvantages of the product include a rather short warranty of only 60 months, installation complexity and very difficult dismantling in the event of a breakdown.

• VitrA S50 9003B003-7200 made in Turkey and is a classic solution. The bowl itself is made of porcelain, and the lid is duroplastic. The model has all the necessary systems, including anti-splash and micro-lift. The volume of the tank is 3 or 6 liters. Users note such design minuses as the inconvenience of buttons and difficulties with installation.

• Model Grohe Sensia Arena 39354SH0 made in Germany. The design has the additional function of a bidet, a triple flush and a special coating that protects against bacteria and dirt. The innovative model is equipped with a hairdryer, filter and even a remote control. The weight of the structure is 40.5 kg. This stylish model has only two drawbacks: a short warranty period and a cost of 146 thousand rubles.

• Laufen Florakids 8.2003.1.000.000.1 Designed specifically for children's use. The system created in Switzerland weighs only 14 kilograms. The white oval bowl corresponds to the hi-tech style and is made of porcelain. The disadvantages of this model are the short term of operation (5 years), as well as the need to purchase accessories.

• Ifo Special RP731100100 is a specialized model acquired by people with disabilities. The toilet was created in Sweden. The main manufacturing material is sanitary porcelain in a classic white hue. The shape of the bowl is rectangular. The absence of an anti-splash system, as well as the minimum configuration are the main disadvantages of this model.

Choosing a hanging toilet in the toilet, first of all, you need to decide how much can be spent on it. This will determine both its material, and what additional functions it will have, and what quality of the product it is possible to count on. Next, the scale of the room and, accordingly, the dimensions of the plumbing device are determined. It is necessary to take into account how much this or that model can withstand and how this compares with the weight of the inhabitants of the apartment.

The drain system is most often double. Its essence is that when you press one button, the entire tank is emptied, and when you press the other, only half of the total volume is empty. If there is one button, the volume of liquid is regulated depending on how long the button is pressed - the longer, the more. Fans of modern technology should definitely pay attention to the touch toilet.The button for this model is missing, but there is a special system that responds to the presence of a person. The sensory mechanism marks the arrival of a person, and then his departure, after which he turns on the drain.

Of course, having solved all the technical issues, it is necessary to evaluate how a particular model fits into the selected interior. Usually, universal options allow you to quickly cope with this task.

• Even the simplest model of a suspended toilet significantly transforms the interior and adds originality to it. The white design has an oval shape and a classic snow-white hue, which looks extremely advantageous against the background of colored marsh tiles on the walls and a warm yellow tone of the floor covering. The drain button is mounted remotely from the bowl, which, in principle, makes its use even more convenient, since there is no need to bend to drain the water. The key is double, which indicates the ability to choose between full or partial discharge. This part is metallic and has an attractive gloss that echoes the adjacent toilet paper holder.

• Another model of wall-mounted sanitary ware, also made in white, fits perfectly into the bathroom, designed in the style of minimalism. The rectangular model of the bowl is complemented by a stylish box of a pale blue shade, which serves to hide communications. Flush buttons are hidden on the side panel of the auxiliary box. The selected colors are ideally combined with the shade of the walls and floors, as well as the furniture in the bathroom.

• For modern styles like hi-tech or futurism, the toilet requires an unusual. For example, it may be an egg-shaped structure, which, when the lid is covered, has nothing to do with plumbing, but more like a giant stone. A pastel shade matching the color of the sink works to visually expand the space and adds lightness to it. As a rule, such systems are distinguished by high cost, but also by the presence of additional functions.

• In a monochrome interior, decorated in black and white, the toilet looks stunning, made in black with gloss. The rectangular shape of the toilet looks very advantageous, and with the lid closed, it does not even remind you of its true purpose. The steel button is mounted on the wall and has a convenient rectangular shape. Such a toilet looks good against the background of a snow-white wall and black matte tiles on the floor. Next to the toilet is a bidet made of the same glossy black material and having a similar shape and size.

• At all, a combination of wall-mounted toilet and bidet is a fairly common technique. Both plumbing devices can be made in sand color, have a matte surface and a shape that is close to a square. The systems look very concise and look perfect in almost any design. The flush button in this interior looks like a metal circle enclosed in a rectangle.

• People ready for experimentation should think about the toilet, possessing not only original coloring, but also patterns. The main color is dark brown, complemented by stylish geometric patterns in a light shade and a horizontal gold line. The rounded shape and rich shades blend perfectly with a simple white background. A laconic bidet is mounted next to the toilet in a similar design.

Hanging toilets are very popular among buyers, despite the rather high price.Most of them write that the construction is easy to use, and also easy to wash. The drain button is mounted on the wall, which looks stylish and original. Despite the external lightness of the design, it is reliable and can withstand heavy weight.

Tips for choosing the type of toilet in the video below.