How to choose a toilet?

When arranging a bathroom, first of all, you need to pay attention to the choice of toilet. It should be practical, convenient to use and not take up much space.

Today you can find a large assortment of toilets in any specialized store. All models are different from each other. It is worth considering the designs that are most popular today.

These models of toilet bowls are small in size and also at a relatively low price. In addition, they are easy to install and convenient to care for. Among them it is worth noting corner model that fits even in a small bathroom. It is these toilet bowls that are most often bought in modern houses and apartments.

This design is less common, but in fact it all belongs to the same category of "compact". The drain tank is integrated with the bowl in one piece. Due to this, there are no leaks at the joints. But at the same time in the event of a breakdown, it will be necessary to change the entire toilet bowl, which is not entirely convenient.

Such designs are expensive, because they differ from others in their original appearance. The tank is located quite high. To use the flushing system, you just need to pull the long rope or chain. However, to place such a toilet is real only in a large roomsince it takes up a lot of space. A similar design fits perfectly into the antique-style bathroom.

These toilets are considered the most compact. After all, their drain tank is mounted directly into the wall, but the toilet itself is mounted on the wall. This design resembles a bidet with its appearance. There are no legs in such models, respectively, and caring for them will not take much time and effort from the owners.

This model is quite convenient due to the fact that it is combined with a bidet. For this reason its cost is high. The sizes of the combined toilets are pretty decent, so you should not buy them for bathrooms that are too cramped. Otherwise, no additional shelves and baskets will not fit there.

There are a large number of materials from which toilets are made. To determine the best for yourself, you need to deal with each individually, considering their pros and cons.

This material is considered the most practical of all existing. In addition, it is quite common due to its low price. Such material is made of white clay, which has a porous structure.

To slightly reduce the hygroscopicity of this material, its surface is covered with special enamel. Its color may be different, but it will not affect the technical characteristics at all. Of the shortcomings, it can be noted that the enamel can be erased after a few years, and this will lead to the fact that moisture will be absorbed into the faience foundation.

This material is also made from white clay. But in the manufacturing process, a little feldspar and quartz are added to it. In addition, when firing clay, a certain temperature must be set, due to which the porcelain is not as porous as the previous material.

However, like faience, the porcelain surface is still additionally coated with enamel. But in the process of operation, it is not erased as fast as with faience goods, which means that the base is also destroyed much more slowly. Caring for porcelain is also many times easier.

In some cases, the manufacture of toilets uses steel that does not rust. It does not absorb moisture, dirt does not stick to it. However, these are not all the advantages of such toilets. Among other things, they are highly durable. Thanks to this, they can be installed where a large number of people use the bathroom. It is from steel that the most original toilet bowls of an unusual form are made.

Their disadvantages include a high price. That is why most people cannot use such toilets when decorating a home bathroom.

If in the old days such models were popular, then in the modern world they are extremely rare. This is not surprising, because their weight is very large, in addition, they take up a lot of space. Besides, such plumbing, as a rule, has uncomfortable seats.

Almost all models made of artificial stone are perfect for decorating bathrooms in the Baroque or classic styles. Among all the above options, such a toilet is the most expensive. Similar models differ from others in that their surface is very smooth, like glass. therefore they are very easy to clean. To do this, just flush the surface of the toilet with running water.

Such toilets have a very low weight and low price. But this is where their advantages end. These models are afraid of temperature extremes, so their shelf life is not too long. Most often they are bought in order to install in the country for temporary use.

The toilet seat and lid are now usually made of plastic. But if the toilet is more expensive or even designer, then the toilet seat can be made of wood coated with waterproof varnish.

There are several flush systems that are used in modern toilets.

If such a system is used, then the water stream moves along a direct path. For this reason, it is often called cascading or horizontal. Such a system often used during the Soviet Union. In old apartments, toilets with such a drainage system are still found.

Its advantages include the fact that with just the touch of a button you can cope with all the sewage that is in the center of the bowl. But to the disadvantages - that everything remaining on the surface must be cleaned with a brush.

This option is fundamentally different from the previous one. Here, the water does not flow in a straight path. It moves to the ring groove, and then spreads over the entire area. The advantage of such a system is this is the absence of noise. But the minuses should include the high price of toilets with a circular flush system.

There are three main ways to fix the toilet. They are:

• outboard. Such a toilet is hung on the wall. Design places take a little. For their installation you need a special metal installation, welding and an hour of free time.

• Outdoor. This is the classic version that is found most often. The toilet is attached to the floor with nuts. Maintenance and repair of such toilets is the easiest.

• Attached. They are also known as wall-mounted. Suitable for narrow rooms. Mounted in exactly the same way as classic floor models.

The toilet bowls themselves may also be different. The complexity of the care of the product and the effectiveness of the drain depend on their choice.

Such a bowl is located in the very center of the toilet. Its main plus is that All waste material is washed off immediately, so the brush is not needed for cleaning. In addition, in such toilets there is practically no spray when flushing, which makes them especially popular. The plus is that they manage to save money on toilet cleaning fluids.

In such toilets, the drain hole is shifted forward. In addition, there is a recess in which all sewage falls, only then they are washed out of the plate-shaped hole under a huge pressure of water. The downside of this design is a huge amount of spray when flushing. In addition, moisture accumulates on its walls, which leads to the formation of rust.

The drain hole in the visor cups of the toilet bowl is also shifted slightly forward. But if there is a recess in the dish bowl, then here it is replaced by a slight bend. In addition, such models are distinguished by the fact that when flushing, they delay spray. Experts also argue that This is the best option for those who are worried about unpleasant odors in the bathroom.

Another important point is the choice of a drain tank. They are:

• connected to the toilet. This design has its advantages: they are easier to install, clean, repair. Yes, and they look more modern.
• Separate. The tank can be mounted closer to the ceiling, above the toilet. This is a typical version of the old post-Soviet buildings. Or the model can be supplemented with a tank, which is mounted in the wall. This is very convenient, except for one minus - in the event of a breakdown, it will be difficult to get to the tank.

The volume of tanks is from 4 to 6 liters. The higher this indicator, the more water will be wasted when flushing. To save on water bills, it is better to buy a toilet bowl, complemented by two-button fittings. In this case, only half of the water in the tank is consumed. And although such models are more expensive, buying them will be beneficial for those who have meters installed in their house or apartment.

A few decades ago, manufacturers created toilets with a height of 40 centimeters. Now their height varies from 42 to 50 cm.

To understand whether the toilet suits you in height or not, you need to “test” it by crouching on it.

If we are talking about hanging toilets, the approach to choosing their height needs to be slightly changed. Between the bottom of the toilet and the floor should be about 20 centimeters of free space. In addition, it is worth measuring the parameters of the room in advance so that the purchased toilet does not occupy all the free space. The smaller the bathroom, the more compact the structure installed in it should be.

The price of toilets directly depends not only on the material of manufacture, but also on the country of manufacture. All models can be divided as follows.

• Budgetary. These include toilet bowls of domestic manufacturers. In addition, manufacturers from China can also be added to this item.
• Medium price toilets most often produced in countries such as Poland or Finland. Their price can reach up to 300 dollars.
• Luxury Plumbing produced most often in Austria or Germany.

It’s worth a little more to get acquainted with the most popular toilet manufacturers.

• Gustavsberg. The famous company Boch releases products under this brand. Its high quality matches the price. Manufacturers give up to 25 years of warranty on their toilets. Most often, when they are created, they use porcelain coated with special glaze. It is due to this model that they turn out so durable.

• AM-PM. This is one of the Italian companies that produces expensive plumbing. Manufacturers also give a guarantee of up to 25 years on their products.

• Roca. It is also an Italian manufacturer that produces elite-quality products. She will be able to fit into the interior of any bathroom. In addition, its quality is fully consistent with the price.

• Ifo - popular swedish brand. Most models allow you to rationally use water and are equipped with a silent drain system. The warranty period for them is 10 years.

• Vitra. The products of the Turkish company have a rather original design, as well as full automation of the design. They are constantly experimenting with new technologies and do not forget to improve the appearance of plumbing.

• Jacob delafon. French manufacturers are famous for their exquisite products. Their toilets are suitable for people who want to make every room in their apartment or house stylish and thought out to the smallest detail.

• Laufen. The brand was founded at the end of the XIX century. She became famous thanks to the high quality of products. Their main plants are located in the Czech Republic and Austria.

With the development of technology, toilets become more “smart”. The most modern models are equipped lighting, heated seats and even automatic drainage of water.

Another interesting solution that allows you to save money on buying a bidet is the so-called bidet cover. It is supplemented by nozzles. The peculiarity of such a lining is that it is enough to install it on the toilet, and it will fulfill the function of a bidet, eliminating the need to spend time on hygiene procedures. Given that water cleaning is much more hygienic than paper, this model of toilet bowl is becoming more popular.

Another popular know-how is car wash system. Such an addition will appeal to forgetful people, those who are constantly in a hurry somewhere, or just people who want to keep the bathroom in perfect cleanliness.

Another option is This is an anti-splash system. It is intended so that when flushing from the toilet there is no spray, and the rim remains dry. Such a system is implemented very simply. There is a special protrusion in the toilet bowl. The drain hole is narrower and pushed back. The shape of the drain is funnel-shaped. Water washes away all sewage gently and almost silently.

When choosing a good toilet, you need to pay attention to several important parameters. Need to buy only high quality toilets. The high cost of the toilet will pay off over time, because it will not have to be replaced or repaired in the near future. So, it will be possible to save both money and time. First of all, you need to pay attention to the design from well-established manufacturers. In this case the quality of properly manufactured products will be at a high level.

First of all, it’s worth looking at how the toilet is attached. If the room is very small, you need to choose a hanging model. This is very convenient, because under it there is a place for a basket with all kinds of cleaning products. In a larger room, you can install a convenient design combined with a bidet.

When buying, you need to pay attention and to the height of the toilet. Choosing it is so that all members of the family were comfortable using it. When a person sits on it, his legs should rest on the floor covering. In addition, the muscles should not be tense.

Today there are a large number of varieties of toilets. Therefore, customers can purchase the model that suits them best. Many prefer hanging structures and are very pleased.

It is also worth noting that now users often pay attention either to expensive and high-quality German and Italian brands, or to domestic products of an average price category. It’s not necessary that the price of the toilet is too high, the main thing is that it corresponds to its quality, and the manufacturer provides a guarantee for its products.

Many users like models equipped with the latest technology. For poorly heated rooms buy toilet bowls with heated seats. In small bathrooms it makes sense to buy a model with an anti-splash system, so that the toilet does not spray nearby equipment when flushing it.

Very good feedback received. rimless models. The only thing customers do not like about them is the high price. Otherwise, they are good both externally and in terms of cleaning and hygiene.

See how to choose a toilet in the next video.