Making rings on a wedding car, creating and installing them

In the organization of weddings in compliance with traditions, one of the key roles is given to the wedding procession. In it, newlyweds with guests will go to the registry office, take a walk to significant places with a photo shoot, from where they will arrive directly to the venue of the banquet. To make the festive convoy stand out in the general traffic flow on the wedding route, it is decorated with various accessories. In this case, special attention is paid to the decoration of the car of the bride and groom.

There are a lot of variations in the design of the car of the bride and groom, but in many cases it is decorated with wedding rings - a traditional attribute of the ongoing celebration. Rings for a wedding car can be purchased in the bridal salon, made to order or made by yourself, showing a little imagination and creativity. The following describes the design options for this type of auto decorator, its independent creation and installation methods for the wedding crew.

In ancient times, bells flaunted on the cart of young people, the ringing of which rang out throughout the district, reporting the approach of the newlyweds and scaring away evil spirits. The traditions of the "wedding train", as it was called by the Slavs, are still alive today, with the only difference being that cars are used instead of horse-drawn carts, and bells have changed rings.

Wedding rings on a car is a classic jewelry that has not lost its relevance for decades. The reason for this phenomenon lies in the symbolism of the accessory itself and its significance for the wedding.

• The interweaving of the rings indicates a close relationship between the two people who decided to go along the road of life side by side, as well as the combination of two destinies into one.
• The ring, which represents a closed circle without a beginning and an end, combines the images of eternity, unity, integrity and infinity. The latter implies the inviolability of love between the newly made spouses, who will live forever.
• The ritual of exchanging rings between the bride and groom serves as unspoken evidence of a marriage.

When making a car rings, it is worth observing several rules.

• Decide in advance the place of installation of jewelry. When using a rental car, you should ask the owners about the restrictions on how to decorate it. Engaging the TS of friends also requires a discussion of this issue, since the zeal for your “iron horse” is characteristic of the vast majority of car owners.
• Deciding to place the rings on the hood, it is important to ensure that the decoration does not become a driver for a limited view of the road and objects that impede movement. After all, this is a matter of vehicle passengers safety.
• Ideally, the design of the car should show one, maximum two accents, focusing the attention of others. Rings on the car are a vivid example of accent decor, which does not need the company of another jewelry that catches your eye.
• The main accessory and accompanying decorations were designed in the same style of celebration. As a result, the design should be festive, while remaining balanced in shape and color, and not be associated with a fair booth.

This auto decoder can be used as an independent decoration or in combination with other accessories in the form of:

• flower arrangements;
• fabric hearts on the radiator grill;
• ribbons, which also decorate all escort cars;
• sticker numbers;
• thematic flags;
• balloons;
• fabrics for decorating the hood, which are twisted and fixed at an angle with a tick, cover one side of the textile with a textile, assemble it with a fan, have picturesque folds, etc .;
• flowers on the door handles;
• decorations on the side mirrors.

Let us dwell in more detail on the materials used by wedding designers to design the rings themselves, in order to support the chosen celebration style and create a truly festive atmosphere.

The use of white swan figures at weddings is no coincidence. These noble birds, representing grace, beauty and grace, are inherent to create couples for life and to raise offspring together. For this reason, they are considered a symbol of marital fidelity. Not to mention how romantic and attractive the swan couple looks, bowing their heads to each other, when a single heart is formed between them, thanks to natural plastic.

A swan and a swan are an ideal option for decorating a car heading a wedding procession - newlyweds' cars. Their figures are used as a separate decoration for the car of the bride and groom or complement the rings with them: such compositions always look very impressive.

Interesting and unusual is the combination of small rings and large swans sitting on the back. In such cases, the performance of the nest-stand can be very different in the form of a composition of flowers, a lush wreath of roses or lilies, a single large flower, with / without addition of greenery, fabric (satin, chiffon, tulle, organza), bows, ribbons, artificial pearls .

Another option involves combining large rings and small figures of swans, which are located inside each circle.A similar composition can be hoisted not only on the roof, but also on the hood of the vehicle, supplementing with other accessories if desired. Instead of a pair of swans on wedding carriages, a dove with a dove often flaunts as a symbol of family happiness.

The combination of rings and flowers is a win-win solution that has long become a classic. The budget option involves the use of artificial plants, which are indispensable in the autumn-winter wedding season, as they certainly are not in danger of losing their original attractiveness due to the vagaries of nature. The cost of living compositions is slightly higher, however, the crew of the newlyweds, cleaned with fresh flowers, takes on an expensive and respectable appearance.

When choosing a floral assortment, they are repelled from the design decision of the rings. When satin ribbons were used in their design, plants are selected in a similar or, conversely, contrasting color scheme.

If you plan to decorate cars with young decorations from fresh flowers, then living plants should be present in the design of other cars of the wedding procession at least to a minimum. It can be boutonnieres or single flowers on door handles and mirrors, flower garlands and small-sized arrangements on the hood. As a rule, they are made of the same colors as the bride’s bouquet.

In general, flowers for florists are an inexhaustible source of inspiration. They are used to create a wide variety of types of wedding auto decorators - figures, paintings, garlands, letters, which are suitable for decorating classic and original themed weddings. A striking example is the fantastically beautiful rings on a car in the shape of hearts made of fresh flowers and greenery.

Satin ribbons are good to use as a decorative outer winding of the rings and to fix them to the surface of the hood or roof. They also serve as material for creating roses with different densities of assembly, serving as additional decor. An alternative to satin ribbons for attaching rings to the base can be cuts of light flowing materials. Decorative wrapping can also be made of tulle net.

Often wedding processions are decorated with bows, which make the design more expressive. Such jewelry also looks great as a complement to the main composition of rings and satin ribbons. It can be miniature spectacular bows with an insert of fine-mesh floral mesh or large bows made of translucent, matte or shiny tulle.

The arrangement of rings and toys is quite consistent with the wedding atmosphere. A variety of toys are used to decorate the young crew. The most popular option is teddy bears in shades of pink or purple colors. One of them can be put on a hat-cylinder, the other - a veil: such a pair of cubs looks especially touching and cute. No less popular dolls are the bride and groom or soft toys in the shape of a heart.

Let's take a look at the master class on creating rings for a wedding car with your own hands step by step.

What materials will be required for creativity:

• PVC corrugated pipe 2 m long;
• a piece of polystyrene 230x450 mm;
• a piece of matter is slightly larger than polystyrene;
• needles with thread and knitting needle;
• coil of transparent adhesive tape;
• glue gun and scissors;
• ribbons of white, gold or silver 2 cm wide.

We will decorate the product with artificial flowers and miniature bells.

The order of work.

• The corrugated pipe is cut into two parts of different lengths to obtain circles of larger and smaller diameters. The segments are connected into rings and fixed at the junction with adhesive tape.
• Both products are wrapped around the entire circumference with duct tape to hide the corrugated surface.
• The outer winding of the rings is made of tape. When creating each layer of the winding, the ends of the tape are fixed with glue for reliability.

• They fasten the products together: they can be placed side by side or “intertwined” in the classical way, when a ring of a smaller diameter is placed behind the larger one.
• Attach the ring structure to the foam base with a thread through the through punctures made by the spoke.
• The lower part of the base is covered with cloth, wrapping it around the edges and stitching with thread. They do this in order to avoid damage to the car paintwork with floral decoration.
• Decorate the stand with flowers, arranging them to your liking, but not forgetting that they should mask the fabric well around the perimeter of the product.
• So that while the vehicle is moving, plants are guaranteed to stay in place, they are inserted into the base and fixed with a glue gun.
• As a testament, a bell is tied from above to each ring.

The finished wedding auto decorator already has special mounts in the form of rubber suction cups, neodymium magnets, loops for textile decorations (ribbons, twisted fabric). The magnets themselves are quite powerful, therefore, additional devices holding the rings are not required here. But when using suction cups, it will be useful to use ribbons for insurance, securing them through loops for textiles.

The classic version of fixing rings involves the use of ribbons. Products are mounted in different places of the vehicle: they can be placed on the roof or hood, attached to the grille or the front bumper. In the last two cases, the accessory is simply tied with satin ribbons, tying them with original knots.

Homemade wedding accessory is the easiest and most reliable way to fix it with satin ribbons 4-6 cm wide and 0.5-0.6 m long in a suitable color. The tape will need at least 4. When installed on the roof, they first wrap the rings in two turns, then pull them through each door and tie them to the ceiling handrails.

Thanks to such impromptu stretch marks, the wedding accessory will easily withstand any road shaking and will not fall in strong winds. Having decided to install the structure on the hood using tapes, they are sequentially passed through the rings and under the open hood, and then tied inside. Of the remnants of ribbons, bows are often made to decorate door handles and disks.

Workshop on making rings on the machine, see below.