Vidima bathroom faucets are made in Bulgaria. But they are not inferior to similar products of leading Western European manufacturers. It's time to figure out what they are, what kind of assortment the company represents, and how to choose the right model.
Advantages and disadvantages
Vidima bathroom faucets come from Bulgaria. This brand is in great demand.
Brand policy implies the use of first-class plumbing brass.
Users note a pleasant appearance and a comfortable price. The reviews note that Vidima cranes can work for at least 10-15 years.
A small amount of tin is added to brass. Therefore, the mixers work very stably in any conditions. Electroplated coating provides a pleasant appearance. The strength of the applied coating is guaranteed by adherence to technology.
Other positive properties:
resistance to corrosion;
simplicity of operation;
resistance to chemically active cleaners;
minimum demanding care;
long official warranty;
the presence in the kit of all the parts that are needed for self-assembly.
The disadvantages of Vidima products are:
some simplification of design;
the likelihood of encountering difficulty turning the mixer;
loud work at high pressure;
problems finding suitable parts.
How to choose?
For washbasins faucets with small and medium spouts are usually used. A large "crane" and uncomfortable, and it looks somehow ridiculous at times. Most often, the device is mounted directly on the sink. Therefore, it is worth checking that there is no need to use adapters there.
Note: when a bowl-sink is installed, the mixer is placed next to it or built into the wall, directing a stream of water strictly into the sink.
Sometimes it becomes necessary to keep water in the bowl for some time. Then faucets with a bottom valve will help out. In some sources, it is customary to call it a drain headset. Adjustment is made using a special switch located behind the mixer.
For maximum water savings, it is recommended to use contactless type mixing devices with special sensors.
Useful and temperature controllers. They will help to avoid burns or discomfort. Such devices can be mounted on taps for both bathtubs and sinks.
Those who are already used to adjusting the temperature by the mixer themselves should continue to choose thermostatic design. Otherwise, the risk of unpleasant consequences is great.
Choosing a plumbing unit for a bath and shower at the same time, it is worthwhile to prefer a device with a spout that has a separate outlet for a watering can hose. Most often it is mounted on the wall. The switching unit helps determine where the water will be supplied. Faucets with long spouts also help out. But they are less practical.
For a freestanding or atypical bathtub shape, floor mixers are often used. They look like tall, but not too thick, columns of metal. This solution looks very impressive. Inside there is all the necessary set of equipment for supplying water. And for the most stylish look, you can choose a mixing device with a cascade-type spout, even with additional illumination.
An important role is played by the number of adjusting levers. Double lever systems are slightly cheaper than having one lever. In addition, this solution is better suited for the bathroom in a classic spirit. You just need to understand that you will have to change the gasket more often, which will wear out faster. Yes, and fine-tuning the water temperature in a two-fan circuit is difficult, because a lot depends on priorities.
Assortment Overview
Single lever
It is appropriate to start the review of Bulgarian Vidima mixers from the line Hype. This design is equipped with a ½ inch angle crane. The device is optimized for use in the shower. It has universal control and is attached to the wall. Installation is facilitated by the proprietary SmartFix installation system, which includes typical eccentrics.
Other features:
35 mm ceramic cartridge;
reliable protection of the handle from heat;
Options Click, HWTC;
handle movement 100 degrees;
indication of cold and hot water supply;
the ability to connect a shower spout through a special nipple;
painted in chrome color.
You can pay attention to the line Next. By default, these taps are equipped with ½ inch diameter taps. Put the BA402AA on board the bath; it is also suitable for the sink.
The system is designed for onboard installation. Provides EasyFix kit, greatly simplifying installation. Both the body and the spout are completely made of brass. The spout reaches a length of 12.9 cm. The design contains an aeration unit of the Perlator model. A German 3.8 cm ceramic cartridge is placed inside.
Other features:
handle movement 100 degrees;
the possibility of using the shower function with a particularly low pressure;
enhanced aeration;
shower head with a diameter of 7 cm;
retractable flexible hoses with a diameter of ½ inch;
metal hose 150 cm long;
flexible eyeliner 3/8 inches.
Model Wave Equipped with a ½ inch angle tap. BA416AA designates a decent wall-mounted mixer. Designers have provided a completely hidden installation. The length of the cast spout reaches 17.5 cm. Between the wall and the Perlator self-cleaning aerator should be 17-17.5 cm.
Double lever
In this category products of the line deserve attention. Art. The BA327AA version is designed for use in the shower. The width of the frame reaches 35 cm. Eccentrics of a standard type can be used for installation.Inside delivered ceramic crane boxes supplied from Germany; they rotate 180 degrees.
Mark options such as:
hand shower;
imitation of rain jets;
water flow rate up to 8 l in 60 seconds;
handle overheat protection;
EcoSaving;
Cool Body
150 cm metal hose
Ruler Retro contains the excellent model BA354AA. Features are as follows:
monolithic cast brass bodies;
spouts 9 cm long;
the optimal distance between the wall and the aerator is 15.4 cm;
German ceramic cranks;
flow restriction to 8 l in 60 seconds.
Thermostats
Vidima Thermostatic Mixers V-style. The A6193AA is wall mounted. The handle is made of highly durable plastic. Installation with standard eccentrics is provided. Valves on ceramic discs have a diameter of ½ inch; they rotate 180 degrees.
Shower set not included. But you can mount it using a standard nipple.
The chromed surface looks very attractive.
As an alternative, the A6194AA model can be considered. Characteristics of this mixer:
wall mounting;
handle made of sturdy plastic;
temperature limiting function;
spout length 17.3 cm;
Cascade model aerator;
the presence of a check valve;
option to connect a shower set (need to be purchased separately).
In the next video you will find useful tips for choosing a bathroom faucet.