Most riders collect their stunt scooters on their own. Such custom models are distinguished by their individual appearance and only their inherent characteristics.
What is needed for assembly?
The complete set of scooters can vary slightly, this mainly depends on the type of models. But the kit should include:
- steering column with fork;
- soundboard;
- compression and clamp;
- wheels
- steering wheel.
The steering column takes part in the movement of the steering wheel, thanks to it, the fork can silently and easily rotate in the recess of the deck. This device is responsible for mobility and control. The steering column includes: a fork, two bearings, spacer wheels and a cover.
The deck is the scooter stand, the main part to which all components are attached. Its upper part has a protective coating of non-slip material - usually a sandpaper or rubber. When choosing a deck, you should pay attention to all its dimensions: height, length and width. With a wider deck, maneuvering with a scooter is more difficult; turns are difficult. It should be borne in mind that two legs should not be completely located on it, because the second is not put on a whole foot.
Elongated base parameters also do not add to the stunt scooter maneuverability, but on a short one it is much more difficult to maintain balance during stunts. Optimally for this type of vehicle is suitable deck with an average length. It is also important that it fits well in height, because otherwise the rider will get tired faster when pushing away.
The scooter compression system includes a clamp and some other details; their availability depends on the model of the product. This device connects the steering wheel to the fork, the structure must be held firmly so that the steering wheel does not swing.
Among the most popular is SCS, which most riders consider the most reliable. It comes with a clamp, bolt and washer. The simplest and cheapest type of compression is thread.
Wheels are an important component of the scooter, axles and spacers are used as additional elements. Some varieties have washers already mounted in the deck. For high-quality statement of maneuvers, the wheels must have a certain strength. These parts are made of wear-resistant polyurethane, in diameter they have 100-125 mm.
The steering rack or steering wheel is made of the most durable raw materials, since this part holds the main load when riding. Most often, this part is made of steel or aircraft aluminum.
How to assemble?
To not only correctly assemble a custom scooter for tricks, but also to be completely confident in its safety, it is worth following the step-by-step instructions for its installation.
- As a rule, it begins with the installation of the steering wheel. A spacer ring is put on the plug (some models have already built-in), then the bearing and after that the plug is inserted into the recess of the deck. Then again put on the bearing, then the ring and then the cover. So the steering column is ready.
- The installation of the compression system is determined by the type of kick scooter, and more specifically, depends on the type of compression on it. The simplest is the thread, when the steering wheel and steering column are fixed only with a nut. Most riders prefer the SCS compression system, in which they put a clamp on the steering column, insert a washer into it and fix it with a bolt. It is worth considering that with a tightened compression, the steering wheel will be difficult to turn, and this can provoke a certain discomfort when driving. The clamp does not need to be fixed yet, this action is carried out after the steering wheel is installed.
- Now it's time for the wheels. To do this, they are placed in the appropriate connectors, insert the axis and tighten. Certain models have separately mounted spacers. These elements help to evenly distribute the lateral load on the bearings in the wheel. It is imperative to check that the wheel is tightened properly: it does not stagger, but also does not rotate very tightly.
- To install the steering rack, it is first inserted into the clamp. Then all bolts are tightened on it, doing it in stages: first, each a little, and so several times. When tightening in one go all the way, the bolts may warp or crack at all.
Thus, the stunt kick scooter is assembled and fully serviceable. You can not buy this vehicle as a set, but choose the components yourself, based on your own wishes. Such a custom scooter will serve no worse than the models assembled at the factory, because the owner put his strength and part of his soul into it.
The visual assembly of the scooter is demonstrated in the next video.
