Double sink for the bathroom: pros and cons, recommendations for choosing

Modern consumers strive for comfort, surrounding them with everything. The same applies to plumbing. In order to do daily water procedures with maximum convenience and at the same time save time, many consumers choose double sinks, equipping them with their own bathrooms.

This plumbing fixture is a two washbasins connected in a single design. It is located in the bathroom for greater comfort when performing hygienic daily procedures. It is especially revered to have two bowls with separate mixers in a large family. But for a young couple, the presence of an additional sink will be only a plus.

Double washbasins for the bathroom are classified according to a number of signs.

• Product form. It can be round, in the form of an oval, rectangular or square.
• Material. In addition to the usual earthenware product, you can purchase metal or acrylic, or marble or glass.
• Type of installation. The sink with two bowls can be mounted on the wall, hoisted on a pedestal, built in.

The washbasin may consist of two bowls located at a distance from each other. Also relevant is the option in which a long pan is equipped with two mixers. Both models are convenient and interesting as a design solution.

The dimensions of a double sink depend on its construction, material and design. If the entire plane of the common surface is occupied by two bowls, the dimensions will be similar to the doubled parameters of a single washbasin.Moreover, the bowls may be the same or one significantly larger than the other.

Tanks of sinks can be shifted to the edges, and between them there is a free plane. This option is characterized by the largest scale width parameter - from 100 cm to 120 cm. A whole meter of a comfortable zone for washing! There is free space on each side of the bowls. The only difference is that the “wings” will be located on the sides of the bowls, united in the center.

There is a difference in their installation.

• Mortise sinks. Placed on the countertop. They can rise above its plane or the edges of the bowl are flush with it. Other processes are similar to the previous option.

• Overhead. In this embodiment, the double washbasin looks like a monolithic canvas connected to the cabinet. It replaces its entire horizon at the top. The edges of the bowls are bent down, which is good for installation and increases the strength of the structure. The simplest sinks to install.

• Mounted. The second most difficult to install, but also the cheapest. The sink is fixed on supporting legs.

If you take into account the cost, then in the middle price link are ceramic sinks. Faience is not afraid of mild blows and water temperature drops. But those who want to get a sink from more durable materials are better off exploring other options.

This material is endowed with the highest strength, aesthetic appeal. It is steady against mechanical damages, is not afraid of blows of heavy objects.

At cost it is equal to a design from porcelain tile. It does not absorb dirt, moisture, odors, but water of increased hardness can leave a coating on the glass surface. Among glass sinks, both transparent and color models are popular. Matte and grooved bowls look interesting. But what seems practical to one is not too impressive for the other. Therefore, you need to choose the material according to your preferences.

High-impact glass in the interior of the bathroom is a trendy solution. Gives the atmosphere in the bathroom airiness and a sense of spaciousness. Many are still convinced that glass products are vulnerable to shock.

The advantages of a glass washbasin are obvious:

• permissible cleaning with ordinary cleaning compounds;
• chemical resistance of the shell material;
• low weight compared to earthenware counterpart.

Has a more affordable price tag with a significant reduction in weight. For all other characteristics, it even surpasses natural glass. But at the same time, the artificial analogue is easily scratched.

Not everyone can buy bowls made of natural stone. These are expensive, rather massive and heavy products. Such sinks are made to order for specific respectable interiors. In any configuration, marble, granite or travertine bowls are able to bring sophistication to the interior design.

Worthy competition for a noble stone of natural origin is its artificial counterpart. This is a composition of materials, 80% consisting of stone chips, and 20% remains on dyes and a binder polymer. In terms of performance, it is not inferior to the natural analogue, while its use is much more profitable.

Sinks made of these materials are very chic, but they require constant care during operation.

Installing a twin washbasin has several advantages and some disadvantages. It is worth learning about them in order to understand whether it is necessary to install such a plumbing fixture in your home.

The sink “for two” is a type of traditional washbasin, but with the difference that it has two tanks on a single bed. The design of the plumbing duo is standard, but there are a lot of variations in its performance.

In addition to the ability to create unusual accents in the arrangement of the bathroom, the “twin” wash-hand basin has several practical functions.

• It saves time for households, helping to maintain a calm atmosphere in the morning in the house and a measured rhythm of charges for business. When there are massive fees for service and study, the bill goes for minutes, and dual plumbing becomes a real masthead.
• The fewer users there are per plumbing device, the more insignificant is the chance to catch microbes. In families where there are babies, one bowl of the sink can be allocated for children's needs, and the second is determined by adults.
• Promotes the organization of personal space, and this is important for spiritual comfort. Own sink gives a person the opportunity to equip a personal zone according to their preference.

The disadvantage of this design can be considered its high cost in comparison with single counterparts and large dimensions. In a small room it is not practical to install a double sink. Hustling there in two is a dubious saving of time. Rather, it will only contribute to red tape and bickering. For a bulky design, space is needed, otherwise it will take half the footage of the bathroom.

They also have a minor minus - cleaning two bowls lasts a little longer. But for a skilled housewife, who has on hand high-quality cleaners, maintaining the cleanliness of sanitary ware is not troublesome.

Double sink is easy to choose in any interior. A variety of styles and design options makes it possible to favorably complement the decor of the bathroom. Two bowls will bring notes of presentability and functionality to the atmosphere.

The design can have two insulated containers, each of which has its own mixer, or long pallets for two with a common mixer. The type of siphon (single or double) depends on the type of sinks.

Proponents of practicality can look at the option of installing a double washbasin with a pedestal. Visually, the design even benefits from such a combination, since in such a combination it looks extremely harmonious.

In the cabinet, located under the countertop, you can conveniently place the necessary cosmetic and detergents and all kinds of bath accessories. In such variations, the cabinet under the “twin” sink has a double function: it hides communications behind the doors and is a storage for things.

Trying to figure out the question of whether it’s advisable to buy a “paired” plumbing fixture, you need to focus primarily on the area of ​​the bathroom. In addition, one should take into account the schedule of the morning regime of households and the regime of the family, and what is preferable to its members, since intrusion into the zone of personal space is not acceptable for everyone. It happens that someone from the family is simply not ready to share the sink with someone.

Often, standard models of twin sinks are compact in size. When operating such plumbing, washing two users at the same time is not too convenient. therefore experts advise a more convenient design option - two tanks of an independent type. They can be built into one countertop or stand. Twin models with a common faucet are best chosen for apartment bathrooms. In private buildings, in the vast majority of cases, the option of a pair of mixers is suitable.

The first rule when installing a washstand for two is to withstand symmetry. To achieve it and maintain the attractiveness of the plumbing “duet”, you need to stock up with the same sets of mixers and siphons.

It is important to select all plumbing parts and accessories in the same style, ideally - from one collection. Then the “steam” sink will miraculously harmonize with the general concept of the design of the bathroom.

The installation technology of such plumbing is similar to the installation of a single sink, except that the heavy construction requires placement on a support. It can be a cabinet or a metal frame. It is also possible to fix the double sink to the wall, but this method of fixing is less reliable in relation to this type of sinks.

Faucets are selected without any recommendations, guided by their own taste. Sinks made of stone or ceramic harmoniously combine brass faucets with a natural and synthetic coating that imitates natural material.

Double siphons are “bottle” type and pipe. The most common ones are bottle ones. They are connected to the drain of both tanks, and slightly below the level of effluents, they are connected in a common flask.

By purchasing a sink in two bowls with one body, you will need a special siphon that allows the connection of two sinks to a tee. Otherwise, you will have to redo the sewer system, and such a process is only realistic at the stage of overhaul.

Double sinks look equally good in different interiors, the main thing is to choose the right materials and the method of their installation.

The following video provides recommendations for choosing a sink in the bathroom.