Footwear

Vibram Shoes

Vibram Shoes

The emblem of the Italian company Vibram (Vibram) is a yellow octagon; for more than 70 years it has been associated with quality and reliability. The company started producing the first rubber soles back in the 30s, and since then has established itself as a market leader. Traces of the Vibram sole remained on almost all the highest peaks in the world, they were tested in various extreme situations.

A bit of history

The founder of the company is considered a climber from Italy - Vitale Bramani, and the name of the company is formed from the abbreviations of his first and last name.

After one unsuccessful campaign, in which several people died due to poor equipment, Vitale set out to come up with new functional shoes. These shoes had to be durable and wear-resistant, but at the same time flexible. Such shoes should be warm, and they should have good grip on various reliefs.

Now this Italian company produces 35 million soles per year, and more than a thousand different manufacturers use these soles in their shoes.

What is the Vibram sole?

Initially, the Vibram sole was made from a specific type of pressed, foamed rubber. Later, it began to add crushed metal dust, to increase wear resistance.

The sole Vibram almost does not slip due to the special arrangement of the tread elements. For good depreciation of the foot, the protectors should be high enough. They should not be very close to each other and should be tilted in different directions. There are practically no protectors in the center of the foot, all of them located on the toe and on the heel. This arrangement system also prevents dirt and small stones from getting stuck in the sole.

Benefits

  • • Treads are positioned so that does not limit the flexibility of the sole;
  • • High wear resistance of the sole and excellent grip on both wet and dry surfaces;
  • • The possibility of a natural bend of the foot due to the lack of protectors in the middle of the sole;
  • • The sole will retain its non-slip properties under various temperature conditions - both in cold and in heat;
  • • Excellent adhesion of the sole of the shoe to the surface is ensured by a different angle of the treads.

Models

In 2005, Vibram launched a completely new and previously unknown shoe - FiveFingers moccasins (Five Fingers). In these shoes, it seems to you that you are walking barefoot, and outwardly the shoes look like gloves for the legs.

Residents of modern cities have virtually no way to walk barefoot, although everyone knows how useful it is. To work on the creation of this model, the designers involved not only shoe manufacturers, but also specialists from the field of medicine to take into account all the anatomical features of the structure of the foot. It turned out a very unusual, but comfortable shoe for any weather conditions with a technologically perfect sole.

Vibram FiveFingers Loafers turned out to be incredibly comfortable, stylish and gained great fame.

Another one an unusual model of shoes with a Vibram sole is called Furoshiki . It consists of shoes without laces, which you need to wrap around your foot and fasten it with Velcro.

In Japan, Furoshiki is a technique for folding a square piece of fabric to pack and carry something. You can say that Furoshiki is like origami from fabric. A piece of cloth takes the form of an object, which is wrapped, and for the remaining "tails" can be carried, as for the handle.

It often happens that new shoes are not quite comfortable, they have to be worn for a while so that they take the form of your foot. This will never happen with Furoshiki shoes, because you can give the shoe a shape that is convenient for you.

Vibram calls these shoes “wrapping paper” for the legs, because that's what it looks like: your legs are wrapped in a soft, flexible cloth.

Types of shoes with Vibram soles

Boots

All shoes must be matched to their operating conditions. Vibram mountain boots are distinguished, which are suitable for multi-day hiking in difficult terrain with heavy load. Most of all, these shoes are popular with climbers and tourists. Mountain boots should have increased wear resistance, so that they are enough for more than one season and good fixation of the ankle. They should be "breathable" and waterproof, and also provide reliable adhesion to rocky, grassy, ​​loose and other types of surfaces.

Trekking boots are suitable for walking in nature, uncomplicated hiking trails on hilly terrain or hiking. Tracking shoes should be comfortable in the first place, not to let moisture inside the boot and not to allow fogging of the feet. They should have a reinforced back, ankle fixation, and a multi-layer sole to protect the foot from bumps and injuries.

Hiking boots - Suitable for short hikes, walks and trips in a rough terrain. They are similar in their properties and purpose to trekking boots. Boots for tourism should also fix the feet and ankles, be lightweight and comfortable to wear, well ventilated and protect from rain and bad weather.

High boots are high army boots with laces and thick soles. Despite the great height of the shafts of the berets, they leave the ankle movable, at the same time protecting it from dislocations and sprains. Bertsa was highly appreciated by travelers and tourists, their legs are well protected from getting wet. Trousers tucked into berets give extra protection against insects in the forest. Most often, berets are made of leather.

Winter shoes

The range of winter shoes with Vibram soles is divided into two groups - these are shoes for tourism and for the city. The sole of winter shoe models is made thicker, and the tread becomes deeper and multidirectional.

Winter footwear for tourism is designed to operate in extreme weather conditions. It should be warm and waterproof. Some models of such shoes withstand temperatures up to -50 degrees below zero. For the manufacture of winter shoes, leather, nubuck, nylon and synthetic modern materials are used.

The line of winter shoes for the city includes winter boots, winter boots and sports winter shoes. Lightweight winter city shoes will suit you if most of the time you usually spend in a car or public transport. These shoes are made of leather or nubuck. She breathes well, her legs will be comfortable and easy even for a long time.

In the case of a long stay in the cold, it is better to choose warmer shoes, specially designed specifically for such situations.

Women's boots

Women's boots are an invariable attribute of style. A woman in boots looks more elegant than in boots or sneakers. Therefore, many companies began to produce women's boots with Vibram soles. The boots are suitable for daily wear, they are stable, have a non-slip sole and at the same time have a stylish appearance. Women's boots provide their owners with warm and dry feet. Most often, such boots are made of leather, and porous membranes create a ventilation effect.

Sneakers

Vibram sole sneakers are well suited for summer and fall. These shoes will be equally convenient for walking in squares and parks, as well as for short hiking. Unlike shoes, sneakers are lighter. But at the same time, all the positive qualities of shoes with Vibram soles are preserved. Sneakers are waterproof, they fit the foot well, the shock-absorbing sole does not slip and protects the foot from damage and dislocation. Sneakers with a Vibram sole are suitable for daily use, and for a long time they will please their owners with convenience and reliability.

Write a comment
Information provided for reference purposes. Do not self-medicate. For health, always consult with a specialist.

Fashion

beauty

Relaxation