How to fix a sagging sofa?

Each apartment has a sofa on which all family members often gather. Over time, the furniture does not withstand the load, sagging places appear. This spoils not only the appearance, but also the functionality of the sofa. Fortunately, you can solve the problem yourself and without serious financial expenses.

If the sofa has failed, then it is worth identifying the source of the problem.

Usually the sofa bends in the middle, which greatly reduces the level of comfort.

Causes:

1. pillows were washed, the reason is in the filler;
2. the spring block sagged;
3. bent frame.

To identify the causes of the pit, it is enough to visually evaluate each individual element. Owners of sofas face such problems during the long and active use of furniture.

You can fix the sofa only if you have the necessary equipment. The exact list of materials depends on the cause of the breakdown.

Inventory for restoring a crushed sofa:

• upholstery fabric;
• pillow filler;
• thread for hauling;
• furniture stapler and staples;
• flat screwdriver for upholstery removal;
• furniture belts or strips of durable fabric;
• wood bars for frame repair.

It is possible to repair a sagging sofa only after identifying the cause of the pit.

The easiest way to replace the filler in the pillows:

1. open the side seam;
2. add filler in the required amount;
3. if necessary, completely remove the old filler, replacing it with a new one;
4. carefully sew the side seam with a strong thread.

It is recommended to use the same filler that was in the sofa cushions. Usually it is enough to add material if it sags after several washings.

Quite often, the reason for the appearance of pits on the couch lies in the damaged spring block. In this case, clean the upholstery as carefully as possible so as not to spoil it.

Do-it-yourself repairing the spring unit is simple:

• find a broken spring and pull it out;
• place a new part of a suitable size on an empty spot;
• when repairing it is recommended to use pliers;
• It is important to install the new spring on the right side so that it does not fire when using the sofa.

On examination, it may turn out that the sofa sagged due to a broken frame. You can solve this problem yourself. Simply remove the broken part and make a new one of a suitable size.

In some cases, it makes sense to immediately change the mount on a new one. Metal parts tend to rust over time from environmental influences. It is important to make a new frame part from dried wood. Otherwise, the repair will have to be repeated soon.

In particularly difficult situations, it is worth consulting with a specialist before starting repairs. You should be very careful with the sofa when repairing the spring unit, otherwise there is a risk of injury.

Consider the main mistakes in self-repair.

• Wrong cutting. It is recommended to cut a new fabric from the old upholstery. If this is not possible, then you should take accurate measurements from sofa cushions or other elements.
• The use of untreated wooden parts. The wood for the frame must be dried and soaked with an antiseptic. Otherwise, the part will soon begin to rot.
• Disregard for additional fixtures. New parts on the frame are recommended to be reinforced with metal corners. So the design will become more reliable.
• Large distance between staple staples for furniture. The upholstery must be fixed in a special way so that it does not disperse. Staples should be placed at a distance of not more than 20 mm from each other.