Who is an extruder driver and what does he do?

Extruder is a special technique designed for processing polymers into alloys. Since such a machine cannot work and carry out its tasks independently, a qualified specialist is needed, which is called the extruder driver. What does he do?

The extruder driver is specialist with skills and knowledge in the field of polymer production. This work is quite complicated, responsible and even dangerous. The fact is that chemicals can have a negative impact on human health, therefore, when performing duties, it is necessary to carefully observe safety precautions. Extruder driver - a harmful profession.

In his work, the employee must necessarily use personal protective equipment (PPE). That is why independent work on an extruder only adult persons who have undergone special training, as well as having studied briefings on safety and labor protection, may be admitted.

In addition, for those who want to work as an extruder engineer, will have to go through a medical boardduring which it will be determined whether a person is suitable for such a job or if he has contraindications. In the latter case, a person cannot be allowed to work even if he has passed all the necessary stages of training. People who are intoxicated or intoxicated cannot be allowed to perform the duties of a driver. If a person who is in an inadequate condition receives permission to work, this will be a gross violation of safety rules.

Like other professions, this one has its advantages and disadvantages. The positive sides can be considered:

• the demand for a profession in the labor market;
• good salary;
• the opportunity to master the profession directly at the enterprise, but in this case the rank will not be higher than 5.

There are also negative points. The most significant of them are:

• relatively little prominence of the profession;
• monotonous work;
• possible negative effect of chemicals on the body.

The responsibilities of the extruder driver include a lot of tasks. A person is required to perform the following.

• Carry out regular inspections of the extruder. If a malfunction is detected, the machine must be sent for repair.
• Clean contaminated parts as necessary.
• Set the necessary operating modes of the extruder.
• Check the products for compliance with the declared sizes and parameters.

Another important duty is workplace safety check. Before starting the machine, you need to check its serviceability, as well as the operation of the ventilation system, grounding, lighting sources.

The driver of the extruder is assigned big enough responsibility. It concerns both the operation of equipment and the quality of products. Also under the individual responsibility of the employee is the following.

• Tracking the readings of instruments installed on the extruder.
• Control over the actions of the machine.
• Product quality control.

The driver does not have the right to leave a working extruder unattended. It should also not activate it if even minor faults are detected. In his work, the specialist should be guided by his skills and knowledge regarding the functionality of the extruder. In addition, you must know the state standard specifications for the products.

There are 5 categories for the profession of an extruder driver.

• The list starts with 2 categories. A professional of this level has the right to work with the simplest parts, can adjust and regulate equipment modes, and prepare a workplace.
• For a specialist 3 categories admission to mid-level technology is possible. The employee independently carries out the whole process: from the preparation of the workplace to the quality control of manufactured products.
• Specialist 4 categories has access to an extruder with a complex cross section. With more complex mechanisms, it can only work under the supervision of a top-level specialist.
• WITH 5th category a person can work with extruders having a particularly complex cross section.
• Driver 6 category - This is a person with secondary specialized education. It can work on automated extruders, as well as fill out their technical passports.

You can get the profession of “extruder engineer” directly at the enterprise itself and in specialized educational institutionswhich include schools, technical schools and colleges. You can take training in one of the selected educational institutions after the end of the 9th or 11th grade. As a supplement, you can take a training course on “Extruder Engineer” on a paid basis. Such courses are conducted by private educational institutions and employment centers. You can get a profession directly at the factory. But still, even in this case, you will have to receive additional education, for example, take courses on a paid basis.

You can work in factories and enterprises associated with the chemical industry. In particular, where films, pipes and granules are made. The average salary is 50 thousand rubles.This indicator depends on the rank of the driver, as well as the status of the enterprise and the region in which it operates.