Features of the choice and use of the apparatus for manicure Mercedes 2000

Representatives of the fair sex can take care of their own hands not only in salons, but also at home. To do this, you will need to buy a Mercedes 2000 manicure machine. With it, you can make unedged manicure, in which the skin around the nail is not cut off, which means that its injury is excluded, only the keratinized layer of cells is removed. One of the advantages of using this device for manicure is ease of use and reliability, high power and effectiveness compared to classic means for treating nails.

When using Mercedes 2000 You can achieve the following results:

• eliminate solid particles of the skin, and this is the main thing during manicure and pedicure;
• remove the skin around the nail;
• cut off gel polish or any other;
• shape with a fingernail.

Fraser is a tool that runs on an electrical network. It consists of the following components.

• Body. It contains a power supply, a knob for adjusting the speed of the cutter, a button for connecting and disconnecting.
• A pen. This is the main element of the device. It is lightweight so that the hand does not get tired. It contains a cutter, the second end of which is attached through a wire to a special connector. There is a built-in suction that is used to eliminate nail cuts or artificial turf.

Using this router include the following steps.

• Place the device on a surface that should not be wet. Insert and fix the desired cutter well.
• Set the speed to the smallest value.
• Connect to the network.
• Choose where the cutter will rotate, no need to switch the reverse in the process of nail design. If you need to change the direction in which the mill moves or the mill itself, you need to turn off the device, otherwise injury cannot be avoided, then the device will quickly break down.
• The device starts using the power button and buttons on the handle.
• Set the speed of revolutions, it must be changed carefully.
• When the work is finished, set the knob to the smallest value, then the cutters will stop rotating.
• Now you need to turn off the buttons on the body and handle and disconnect from the network.

To get the desired result, you need to have an idea how to use the device for manicure. Before you start using it is necessary to study the attached instructions. The process of processing nails is made with absolutely dry skin. If you want to hold your hands in warm water, then this procedure must be done a couple of hours before the manicure.

This type of nail treatment is done 2 times a month. Using the device at home, you need to turn it off every 20 minutes so that it does not overheat. During the processing of nails, you do not need to squeeze the handle strongly so as not to lead to its deformation.

For the device to work for a long time, The following types of care must be observed:

• clean all parts of the mill from dust;
• so that the cutters are not exposed to moisture and sunlight, it is better to store them in a special bag;
• make sure that the power cord is not twisted;
• disinfect nozzles and dry them well.

One of the varieties of the device is the Lina Mercedes 2000. On its frame is a lever for adjusting the rotation of the cutters and reverse. It has a comfortable handle with a convenient design that does not vibrate, this is a favorable side of the application. There is also a stand for it and cutters in the amount of 6 pieces with diamond spraying. The number of revolutions per minute is up to 20 thousand. This device is good to use at home and in the cabin.

Reviews of women using this unit and salon masters are mostly positive.

They note the following benefits:

• it’s much cheaper to do your own nail treatment;
• attractive cost;
• convenient and easy to use, reliable and high quality;
• 6 nozzles and 6 abrasive graters included.

An overview of the apparatus for manicure Lina Mercedes 2000, see the video below.