Manicure machine Marathon

Working in the salon, the nail service master simply cannot do without a manicure machine. But at home, many women have such equipment. The market offers a huge range of devices of this orientation with different functionality at different prices. Among professional devices for manicure, TM Marathon devices deserve special attention.

Marathon manicure machines are manufactured by the famous South Korean company SMT, which was founded back in the 70s of the last century. Initially, this company produced high-power devices used in dentistry and cosmetology, and then mastered the production of devices for the nail industry. The company's products are known all over the world and are quite popular.

Under the brand name Marathon, devices are produced for both professionals and home use.

Marathon manicure machines have several advantages.

• High product quality is proved by the high demand for such devices.
• Convenient design is thought out to the smallest detail - it is comfortable to use the device.
• The low noise generated by the router will not be distracting during operation.
• A convenient mechanism for changing nozzles will allow you not to spend a lot of time on the procedure. Most milling cutters fit it.

• Most models are equipped with pedals for foot control, which facilitates the work of the master.
• All milling machines have the ability to reverse movement.
• Built-in overheat protection system will help keep the device in working condition for many years.
• A wide range of products will allow you to choose a device with the necessary technical characteristics.
• All equipment is warranted.You can replace worn parts in the post-warranty period - in many cities there are Marathon service centers.

The lineup of these devices is quite wide. Below are a few devices that are especially popular.

• Marathon 4. Applies to portable devices. It has four speeds that are switched by a mechanical handle. The maximum rotation speed of such a mill is 35,000 rpm. / min., the power of the device reaches 40 watts. The device weighs a little more than a kilogram, the unit parameters are 150x85x70 mm.

• Marathon 3 Champion. This is one of the most popular models among professionals. It is equipped with a smooth speed controller, which can reach 35,000 rpm. / min Its power is 45 watts. The size of the device is also small - 115x155x80 mm, weight is 1250 g. The case has convenient openings for storing nozzles that may be needed during operation. The device is available in white, blue and pink. It does not heat up, it can be used without shutting down for 2 hours.

• Marathon N2. A feature of the device is the ability to smoothly control the speed using the foot pedal, which frees the hands from the need to manually set the speed, which in this device reaches 40,000 rpm. Another convenient feature of the device is the ability to turn on the reverse without slowing down. The power of this router is 50 watts. The block dimensions are 147x115x96 mm. The device weighs 2.5 kg.

• Marathon Multi 600 DUO. This is a brushless high power device. Such a device is equipped with touch control, has an LCD display that shows the speed of rotation of the cutters. It also indicates the error code in the event of a malfunction, which allows the wizard to fix it without diagnosing it. Adjusting the speed of the device is made both manually and using the pedal. The device is also equipped with a cruise function. The milling speed reaches 50,000 rpm. / min., its maximum power is 230 watts. The weight of the device corresponds to 2.9 kg, the parameters of the block are 268x122x228 mm. If necessary, the device can be mounted to the wall.

• Marathon Handy 702. The device has an increased power, which is 100 watts, touch control, speed indicator, auto cruise function. The device operates at a maximum speed of 40,000 rpm. / min The device weighs about 2.5 kg, the dimensions of the control unit are 232x180x137 mm.

In order to make hardware manicure with the help of milling machines ТМ Marathon, Follow the instructions below.

• 30 minutes before the procedure, you need to prepare your hands: wash your skin well with soap and remove the old coating.
• The manicure procedure begins with the processing of the cuticle. First, it is pushed aside, picking up the “flame” or “candle” of the pterygium with a nozzle. Then the cuticle itself is carefully cut with the “balloon” nozzle.
• After that, the nail plates are given the same length and shape with a “cylinder” mill.

• At the next stage, the surface of the nail plate and the skin around it are polished.
• Remove dead skin particles from the surface of the hands with a dry brush, apply a decorative coating, moisturize the skin.
• Now all the cutters that were used in the work should be disinfected and sterilized. The device itself needs to be wiped from dust.

By purchasing a Marathon manicure machine for the first time and not having the skills to work with such machines, There are several aspects to consider.

1. Decide what the milling cutter is for. If you need it for home use, then you should take a closer look at the device with a minimum set of functions. Do not overpay for touch control or car cruise.
2. Beginners do not need to purchase a device with high power - it is easy for them to saw through the nail plate, since there are few skills in working with the machine. You need to work at low speeds, while not pressing the handle of the device.
3. Cutters are best selected in accordance with the work that needs to be done. Do not experiment. Starting the procedure for the first time, you should choose softer ceramic nozzles with a red notch.
4. The pen must be held in the same way as a regular pencil. Touch the nail only with the side of the cutter.

Professionals quite often prefer Marathon manicure machines. These are decent milling machines, the price of which is fully consistent with the quality. Masters using these devices note their high power, stable operation, small size. As the disadvantages mention the lack of cutters in the kit, as well as the fact that the nozzles need to be bought separately. Additionally, it is worth noting that on some devices, on the speed knob there are no revolutions, so they have to be set “by eye”.

Details on how to make combi manicure with the Marathon-3 Champion device, you will learn from the next video.