Spool removal machines: features, types and selection

Pellets are a nuisance known to many, which always happens inappropriately and for some reason with the most beloved things. Wearing a thing covered with lumps and spools with the same feeling that before, when they were not there, is no longer possible. Attempts to get rid of them have always been made, however, their success over a long time was very doubtful. At the end of the 20th century, several manufacturers of household appliances began production of machines for removing spools.

The principle of operation and the device of the machine for removing pellets resembles an electric razor invented a century earlier. The difference is a lower blade rotation speed, as well as a container for collecting cut material.

The protective grid ensures the safety of the device, protecting it from contact with rotating sharp blades and minimizes the impact of rotating structural elements on the fabric.

The cut pellets are carried away by a stream of air into a special container. Most often it is made transparent, which allows you to control the degree of filling.

For more effective removal of unwanted elements formed on clothing, it is recommended to decompose the item on a flat, but not solid, surface. Before processing, it is advisable to try to smooth out all the folds. It is necessary to process without haste, avoiding effort, as this can lead to cuts in the main fabric. When working with the device, it is important to follow the instructions.

The advantages of the machine are obvious.The device is usually small, usually ergonomic. The fabric cleans quickly, without undue effort. The cleaning process is very effective, and the appearance of new lumps will occur rather soon.

The disadvantages of these simple units usually stem from their design and they may vary from model to model. Some are characterized by low power and for cleaning a coat, and even more so a carpet, will not work. Others may not have a knife height adjuster and this can cause damage to delicate and delicate fabrics. Battery powered devices require frequent replacement. Battery cars need a long charge.

In this section, all products will be classified by type of power: from an electric network of 220 V, from a battery, from replaceable batteries.

Of course, in no case should one ignore products manufactured under well-known brands. As a rule, it is she who turns out to be the best in her category.

Let's start with the lightest battery powered devices.

Of course, one of the best models with replaceable batteries can be considered Philips GC026. The device has an ergonomic body that fits comfortably even in a small hand. The weight of the machine is 0.3 kg. The wide surface of the mesh with various sized openings ensures safe operation and perfect cleaning of spools, fibers and lumps. The capacious transparent container for cut waste is easily removed for cleaning. The disadvantage could be considered a rather high price. But in this case, price is a sign of quality.

Austrian company First actively masters and small equipment, which include machines for collecting spools. There are several models of devices of this company on the market. All of them are equipped with stainless steel blades, a transparent capacious removable container and are light in weight. The company's models are distinguished by high ergonomics. However, the company has not yet appeared any original solutions to extend the life of its products. No repair or replacement of worn parts is provided.

Very original is the popular model. Dexp TLM-01. The unusual design will certainly draw attention to this very serious unit. The machine gives the impression of reliability not only externally. Thanks to the wide working surface, the almost silent motor allows you to cope with a wide variety of spools on various fabrics. The blades are made of stainless steel. However, the height of the knives is not adjustable, and you should use the machine to clean delicate items very carefully. Also, a non-removable handle makes the light and compact machine quite inconvenient during transportation.

The well-known Sino-Russian brand Scarlett offers several relatively inexpensive devices. Scarlett SC-921 - A very good alternative to expensive models. The container for collecting spools in this unit is relatively small, but quite accessible for observation. Also, the machine features a smaller diameter of the working surface. When cleaning a large product, you have to make more movements.

Scarlett SC 920 - Another popular model of this company. The machine is distinguished by a slightly larger size. The transparent container is easy to see and easy to remove. The grid has a protective cover that prevents mechanical stress and debris during storage or transportation. The absence of a battery indicator requires the constant availability of replaceable batteries.

Despite the fame of the Maxwell brand, the company produces very affordable options for a machine for cutting spools Maxwell MW-3101 and Maxwell MW-3101 W. The advantage of models can be considered compact and light. The second machine has a convenient handle, a capacious container for spools, and a wide working surface. However, as an apparatus that you can take with you on a trip, this machine is hardly suitable. Despite the lightness, it has a rather large size. The disadvantage of both products of the company is the insufficient hardness of the knives, the replacement of which is not provided.

Sindo SS 4046 - An apparatus created specifically for the cleaning of woolen products. The lattice features do not allow to process things from thin materials. Users do not always follow the instructions, which is often the reason for serious complaints about this specialized unit. High power requires frequent battery changes, and the lack of a charge indicator often does not allow you to notice a problem during.

Model Smile MC 3103 has a very compact ergonomic body. The container for lint and spools is easily mounted and dismantled. The model is perfect for traveling or business trips, its weight does not exceed 200 g. It works great during the warranty period (12 months), but you should not expect long, perfect work from it. Despite the fact that the knives are made of metal, it is usually they that fail as a result of a banal blunting.

Universal unit VES V-HT 9 different ability to work from different power sources. In addition to batteries, the machine can be connected to the mains. So its creators have significantly expanded the range of applications of their products. The machine can be used at home from the mains and on a battery trip. The weak point of this model remains the blade.

Russian battery machine Mig 6002 differs in modern design and compact design with a capacious container for cut pellets. Motor power is 2 watts. The height of the blades of this model can be adjusted, which greatly expands the range of use. However, the machine cannot be operated during charging, which can last up to 8 hours. Fully charged batteries allow continuous operation for 30 minutes. This is one of the lightest battery models, its weight is only 90 g.

Battery device Sentek ST 2471 it weighs no more than 200 g. It can work continuously for 30 minutes without recharging - this is enough to thoroughly clean several things. The working surface has a diameter of 6 cm, which allows you to process a large surface in one pass. The height of the blades of the machine can be adjusted, so it can be used equally effectively for cleaning coarse fabrics, and for caring for delicate items. The disadvantage can be considered a long battery charge - at least 8 hours from the mains 220 volts.

Xiaomi Deerma DEM-MQ811 - The original model of a famous Chinese brand. This powerful unit is even suitable for cleaning carpets and furniture. Successfully cleanses and delicate tissues. The working surface is wide, and the diameter of the holes in the grid allows you to tighten the air spools and lumps of any size. The kit contains a USB cable that allows you to recharge the battery from a computer or through a power supply, which, unfortunately, needs to be purchased separately. The peculiarity is that the machine can work during recharging, you do not need to wait several hours. Knives are made of stainless steel.

A small Chinese rechargeable car, characterized by a bulky name - Fuzz Removing Mashine 803, It was developed taking into account the wishes of users. The case turned out to be very convenient. Using the device is easy regardless of the size of the hand. The machine weighs only 190 g and fits in any baggage without any problems. Charged for 6 hours, the batteries allow you to use the device for 45 minutes. Moving surfaces and the grill are made of ordinary steel and will not tolerate contact with water.

Not bad proved the Russian car Mig 6011. The model has a sturdy plastic case with a convenient stationary handle. Power is 5 watts, this is enough to clean absolutely any tissue. The mesh covering the rotating knives makes this domestic device safe for both the user and fabrics. The width of the working surface of 5 cm allows you to complete the work quickly enough. The length of the standard power cord is 1.5 meters, which is also very convenient. Not the last among the advantages may be the quiet operation of the device. But it will be problematic to take it on the road, the dimensions of the product are quite large, and it is impossible to use it in the absence of an electric network.

Another Russian apparatus Mikma IP 1002 It has a slightly lower motor power - 4 watts. But this is still more than that of battery-powered cars or their analogues. An additional argument in favor of “Mikma” can be the height adjustment of the blades, and the working head together with a metal mesh has a floating design and is capable of tilt changes with respect to the machine body. The package includes a protective plastic cover that prevents the ingress of dust and other contaminants to the working surfaces.

Chinese device Lint Remover YX-5880 has a 4 W motor, long power cord with adapter. The device equally well removes both small and large lumps of pile. Replaceable blades are provided in the kit, which significantly extends the service life.

Someone advice on what to base when choosing such a seemingly insignificant element of modern technogenic civilization, such as a machine for removing spools, amid an abundance of complex equipment may seem unnecessary. However, we dare to take on this task. So how do you choose this actually very useful gadget?

• First of all, the machine should be easy to use, this will not only increase productivity, but also protect the fabric from awkward movements when the work surface is in contact with the fabric at an angle or too tightly. Before buying, it is advisable to hold the model you like in your hand, twist it, analyzing your feelings. If you feel uncomfortable, it is better to try another model.
• If you do not plan to handle things on an industrial scale or furniture upholstery and coats, an overly powerful model may not be justified.
• If you plan to clean things on trips or business trips, a model with replaceable batteries will be ideal.
• To handle things at home, it is better to choose a powerful universal device with adjustable blade height and powered by a stationary power supply.
• An important selection criterion may be the quality of the cutting surface of the knives. Knives from stainless steel can be considered ideal.

In use, the pellet remover resembles an electric shaver. Of course, if there is no need to clean the fabric, this is best not to do. But if lumps of fallen pile still appear, they can be easily removed.

• To do this, make sure that the protective net and the knives for cutting the spools are clean. Before starting collecting the spools, it is advisable to check the charge on the battery or batteries.
• A thing that needs a haircut should be avoided by folding it on a flat surface, an ironing board is good for this. If the machine is operating on mains power, care must be taken to ensure that the length of the power cord is sufficient.
• If the height of the knives is adjustable, you need to use the instructions to set the appropriate fabric height.
• When the device is turned on, it is necessary to conduct it sequentially, with an average speed, along the spread surface of the product.
• During operation, it is periodically necessary to check the cleanliness of the mesh and the degree of filling of the container for collecting lint and spools, timely cleaning them.
• Upon completion of the work, a thorough cleaning of the unit itself must be carried out, and the cutting surfaces should be greased with special oil.

There are a lot of reviews on spool collecting machines. It is hardly justified to analyze all the mentioned models within the limited framework of the article; let us try to summarize often conflicting data.

Let's start with a positive assessment. For many, this is an indispensable assistant - the machine gave things a new life. She is able to renew the sweater and coat, extending their socks by almost half.

Of course, there are also negative reviews. Some users got dull knives six months later. The device must be thrown away, as the blades are often irreplaceable.

Philips GC026 is said to be unreasonably expensive, the same effect can be obtained using an inexpensive Chinese model.

An overview of the spool remover is shown below.