Folding dining tables for the living room

A table-book can be found in a huge number of families, because this product became popular many years ago. Moreover, it is in demand at the present time. We will talk about advantages and disadvantages, a variety of models and selection rules in our article.

Transformer tables are on the market in a wide range. This is a design that can be folded out, and when assembled it looks quite compact, resembling a narrow pedestal, and saves space. However, when unfolding, a full-fledged table is obtained with a length of 1, 2, 3 or more meters, at which you can seat a family and guests up to 10-12 people.

Book tables are divided primarily by purpose. They are for the kitchen and for the living room. In the first case, models sometimes suggest a chest of drawers for storing kitchen details. Often they are performed on a metal frame, and the legs are also metal. They differ in not so large dimensions, they can often be installed near the wall, with only one case being disassembled.

Models designed for the living room are usually larger. They most often have a rectangular shape. When opening the wings, a large countertop is obtained. Legs reliably fix the transformer in a disassembled state.

The material of manufacture can be varied. The most common folding table is from wood, chipboard, plastic, glass and metal. Consider each option of raw materials in more detail.

An array of wood looks very expensive and is very reliable. There is no doubt its strength, respectively, service life is quite long. Design is most often very interesting, often decorated with artistic carvings. Such products are not afraid of moisture, are not subject to deformation. But if for any reason the appearance suffers, the situation can easily be corrected with the help of restoration.

Chipboard is made from pressed wood sawdust. It is a cheaper substitute for natural massif. Moreover, if the manufacturer does not value his reputation, he can use not very high-quality components, for example, toxic glue. Therefore, it is very important to require quality certificates for products made from such material.

Externally, the chipboard looks like raw boards. From above they are covered with a special film, which will become an imitation of wood. It should be noted that such material does not tolerate high humidity. If water lingers on the surface, this can lead to its expansion and deformation, which cannot be restored. However, at the same time, the cost of products from chipboard is very budgetary.

Metal is most often used for the manufacture of components and fittings. From it can be made frame and legs. The material is durable and environmentally friendly. And also there is no doubt its durability.

Plastic is commonly used to cover countertops. It is quite durable, can withstand moisture, is not afraid of mechanical stress. Such tables can be used without problems in the open air. The price is usually not too high, while the quality is at the level.

Very rarely, but nevertheless, in individual projects for creating book tables can be used glass. This is due to the fact that this material is very fragile. A table will have to periodically disassemble and assemble, respectively, increases the chance of damage to the surface during these manipulations.

When choosing a transformer table, buyers rarely have problems with a lack of shades. Usually they are presented in a wide range. Imitation of wood is very common, whitewashed oak and Italian walnut are popular. Manufacturers make the tabletop itself both matte and glossy, it all depends on the taste of the consumer.

Often, buyers stop at monochrome options that have different shades. In addition to the classic white and black, you can give preference to brighter colors. It looks original red and turquoise.

You can also pick up an ornament. It can be anything from imitation of marble to photo printing.

Folding tables have 2 shapes: a rectangle and an oval. In the living room, you can use both options, but still rectangular designs are considered more classic, despite the fact that more people can be planted behind the oval.

If the room has very small dimensions, you can use round table book. This is the same oval, just reduced in length. The number of seats in this situation is maintained, while freeing up space.

Any transforming table assumes the presence of accessories. These components are very important, as they are responsible for the reliability and appearance of the structure. First of all, manufacturers think about the reliability of loops.

Previously, piano hinges were used in dining table tables. However, their reliability left much to be desired, sometimes it even happened that the open countertop could simply fall. Currently, components have become better and more reliable; they are made of modern materials using new technologies.

As for the mechanism, it can be of three types. In this case, the essence of the action remains the same.

The table consists of a stationary department and two wings, which are laid out. They are located on the sides, and, rising, are located on a support, the role of which is played by the legs. You can lift only one or both side parts of the countertop. There can be either one or two legs, while in the second case the table will be more stable.

If there are two supports, they can either be screwed in or rolled out from the stationary department. One leg is most often bolted, respectively, is roll-out.

Most often, these designs look pretty strict. Excessive paraphernalia only interferes, since in the first place the functionality of the product. Therefore, outwardly they look quite simple, respectively, suitable for a hall made in a different style. But in some cases, design models are established, for which the style of the room is fundamental.

If the living room is made in style Provence a sliding white table is quite suitable. Style high tech will match the glass table. For country, the model made of natural light wood will become more appropriate.

Choose a table-book for the living room is easy. You need to pay attention to only a few factors.

One of them is designation purpose. If it will be designed for receiving guests, you should consider this when choosing dimensions. In other cases, smaller models will do.

It is worth deciding on the choice of support. Based on reliability considerations, it is best to dwell on the option where each part of the countertop is fixed on two screwed legs. If the dimensions of the structure are small, one leg will be enough, which, in addition, takes up less space under the table.

And finally, you should take into account your own budget. The choice of material and design for the most part will be based on exactly how much the buyer is willing to spend.

See the review of the table in the next video.