Electric scooters have become a familiar means of transportation for Russian users. But even against the general background, Halten models stand out compared to competitors' products. Let's see what this technique is about, for what reason it is especially distinguished.
The lineup
Start a review of devices of this brand is appropriate with the Lite model. The power of the scooter is 350 watts, it can travel on a single charge 25 km in 1 hour. However, after this, the device will need to be sent for recharging. The capacity of a lithium-ion battery is 6.4 ampere-hours. It is rated for 36 V and can be temporarily removed.
The total mass of the Lite model reaches 12.5 kg. The scooter will ride on wheels with a diameter of 10 inches. The maximum load during movement can reach 120 kg, which makes it possible to consider the model as an adult electric scooter. It is curious that three brakes are immediately put on it:
- front with recovery mode;
- rear disk type;
- rear foot type.
Pleasant emotions can deliver and model RS-01. This device reaches a power of 0.5 kW, and its battery absorbs 15 ampere-hours of electricity. Speed can reach 35-40 km / h, depending on the difficulty of the road. The operating voltage is 48 V. The total mass of the device is 16 kg.
On one charge, it overcomes 35 km. The wheel section is 8 inches, and it takes 5 to 7 hours to recharge the battery from scratch. The maximum load mass is 120 kg. In the package, this scooter has dimensions 113x24x43.5 cm.
The package contains:
- multitool;
- Charger
- instructions for use;
- warranty service coupon.
The brakes on the RS-01 are mechanical disc brakes located at the rear. In the manufacture of the frame, steel and aluminum are used. Brand warranty is given for 3 years. For control, users can use a liquid crystal panel. The brake handle with a diameter of 2.2 cm is made with a servo drive.
The manufacturer declares that All synthetic parts of the device are made of especially strong and environmentally friendly plastic. The weight of the scooter along with the packaging is 19 kg. After the layout, its dimensions will be 110x15.5x115 cm. When the scooter is folded, it takes 113x15.5x40 cm.
The next popular model is RS-02. This electric scooter is already designed for a power of 1.2 kW, and its battery can produce 24 ampere-hours of current. The device is capable of driving 60 km on a full battery charge. At the same time, it will develop a speed of up to 50 km / h. As with the previous model, signals are provided using the LED headlight.
Other characteristics are as follows:
- net weight of 27 kg;
- wheel section 10 inches;
- recharge time from 240 to 300 minutes;
- load weight up to 150 kg;
- packaged size 127.3x27.3x51.5 cm;
- all settings are made immediately in the process of making jewelry.
The model RS-03 deserves attention. This technique is designed for a power of 2.4 kW, and its battery produces a current of 24 ampere-hours. The maximum travel distance is 60 km, while the scooter can reach speeds of up to 65 km / h. The total mass of the vehicle is 36 kg and the diameter of its wheels is 11 inches. It will turn out to charge the battery in 8-10 hours, the total load on the scooter can be 150 kg.
Both brakes (front and rear) are hydraulic disc brakes. The scooter frame is made of aluminum. Full setup is done at the factory. The brake handle is made according to the servo-brake scheme. Its diameter is 2.2 cm.
The choice
When it comes to choosing a Halten scooter, maximum attention should be paid to the shock absorbers used. After all, the ride comfort ultimately depends on them. And in a sense, and its safety - because when the transport constantly “jumps” on any pothole, on any bump, it is easy to distract from management and make a mistake. The next important parameter is the size of the wheels. The larger they are, the more serious obstacles can be overcome on the road.
For ordinary people who are not going to engage in races and extreme nature trips, wheels with a diameter of 10 inches will be quite enough. You need to pay attention to the carrying handle. In its absence, the life of the owner of the scooter will be somewhat more complicated.
For maximum convenience, it is worthwhile to prefer versions equipped with seats. It is also necessary to check that the parking footboard does not interfere with the movement, but at the same time helps in parking the scooter.
The steel frame is quite solid and can withstand very high loads. But if the mass of the device is critical, you need to choose aluminum modifications. This circumstance is especially important when using technology by adolescents and children. It is also necessary to pay attention to the battery capacity, top speed and power reserve (these indicators are obviously interconnected). Finally, it is worth evaluating the external qualities of the scooter, and its convenience for yourself. It will be very good if the seller allows a couple of laps.
How to use
As with any other technique, you need to carefully study the instructions. After fully charging the battery, you can immediately go on the road. While driving, hold the steering wheel firmly with both hands. One leg is placed on an electric scooter, and the second is made several shocks to disperse. To brake, click on a special lever.
Consider the instructions for use on the example of the Halten RS-03 model. In other cases, if it differs, it is slightly. The manufacturer’s official instructions state that the declared travel range on a single battery charge is achieved only when the load on the scooter is not more than 70 kg.Another condition is a fairly flat and equipped road. The third condition is that the speed should be no higher than the average level. At maximum acceleration, driving will be slightly less, especially if the rider is quite heavy.
Fold the scooter like this:
- tilt the latch;
- gently pull it out;
- in the fully extended position, hook the latch to the extreme screw;
- press on the locking button (at the same time pull down the steering column);
- stack this column.
For layout:
- discard the latch;
- lift and attach it to the extreme screw;
- push the locking button with your hand;
- raise the steering column, waiting for a click.
You can turn the power on or off by pressing the ON / OFF button. Important: this button should be held for 3 to 5 seconds. Pressing the trigger of the gas will help to accelerate, and releasing it from the hand will slow down the movement of the scooter. Categorically it is impossible to accelerate beyond measure, because it threatens with an emergency. The MODE button helps to adjust the speed.
Using it, one of three modes is set (in order of increasing speed):
- SLO
- MID;
- FAS.
Before each trip, you must carefully check the performance of the scooter. It should be inspected after the trip. The check is especially relevant when, during riding, the electric scooter fell, capsized, hit or fell into a puddle.
Inspect not only tires, but also all fasteners. The battery charge, steering rod fixation, bolt tightening are also checked.
For skating training, it is advised to choose wastelands with a flat surface. In addition, rarely visited park paths, parking lots and paved yards are suitable.
You can ride an electric scooter in the rain only if it is allowed by the manufacturer's instructions. But even if there is such permission, it is extremely important to go round deep puddles.
For a review of the Halten rs-03 2400w, a very powerful all-wheel drive electric scooter, see the next video.