How to suture jeans at home?

Jeans are sewn according to established standards, so on girls with imperfect figure they look less attractive. Although there are separate collections for girls with a non-standard figure, but this cannot solve the problem completely.

If the figure only slightly deviates from the generally accepted parameters, then you can buy your favorite jeans model and take it a little. This process is quite simple, so it can be carried out independently at home.

Over time, your favorite jeans lose shape, stretch. But do not say goodbye to them, because at home you can reduce them by a size or even two.

To suture jeans yourself at home, you need to prepare a sewing machine, centimeter, thread, needles, scissors and pins. Stock up on free time.

If the jeans look great on you, but a little large in the belt, then the situation can be corrected by suturing them along the line of the back seam and waist.

If your favorite model has become a little loose, then it is worth stitching only along the side seams. To make a narrowed hem, it is worth sewing jeans at the inner seams.

Many girls have a wide hips and a thin waist, so any pair of jeans will be loose at the waist. To solve this problem, jeans should be sewn in one of two ways.

The first method is the easiest:

• First you need to make a few tucks along the belt line.
• Next, you need to gently tear a few centimeters of the belt.
• Thoroughly flash all the tucks.
• Cut off the extra centimeters on the belt, and then sew it back.
• It is necessary to be extremely careful when creating a tuck in the buttocks area, since their very long sutures will tighten.

The second method is more complex, but of high quality:

• First you need to tear off the loops, which is located in the back center. In some models it is necessary to eliminate three loops at once. If the brand label is located close, it should be removed too.
• Carefully open the belt, but only ten centimeters to the left and right of the middle seam of the product.
• Then you need to pay attention to the stepping seam, and make it spacer eight or nine centimeters.
• The remaining threads should be removed, and all seams should be ironed well.
• The middle seam must be secured on the front with pins to avoid possible displacement. Next, transfer the fastening with pins to the wrong side and steam by iron.
• Fold the legs together and draw a line at a slight angle at a distance of about two centimeters.
• The drawn line must be sewn, and the edges of the fabric to overcast.
• Then turn the jeans to the front side and make two lines in the center.
• Go back to the inside to sew the step seam, and finish the double stitch on the front side.
• The belt must be attached to the new waist size and cut off the extra centimeters, but remember the allowances.
• Next, the product must be folded in half, with the sides inward, stitched and deployed before ironing.
• Fasten the belt and the main part of the product with pins and sew the belt back.

To reduce the size of the jeans in the hips, they should be sutured along the side seams.

To calculate the distance to be removed, you can use one of the following methods:

• Turn jeans to the wrong side and put on. Using pins, mark a new seam.
• Take pants that fit your figure, attach to them those that you want to suture and draw a line.

The process of reducing the volume of pants in the hips occurs in several stages:

• First you need to tear the belt.
• Then spread the legs on the sides and sew them at the new seams.
• Cut off excess material sentiments and overcast sides.
• Sew on the belt.

If the jeans are spacious in the hips and at the waist, then the belt should not be steamed. Legs must be fully strung and carefully flashed to new sizes.

For jeans made of thin denim, you can make tucks on the sides, then the model will sit better on the figure.

Very often, some jeans models are a thing of the past, and new styles are replacing. More recently, every fashionista had flared jeans in her wardrobe, but now they were replaced by narrow models. Do not part with your favorite jeans, because they can be altered.

To make jeans in your legs, do the following:

• Turn the jeans inside out and try on.
• Pins mark the line for a new seam, but one centimeter should be taken into account, which will go to shrink the product after washing.
• Jeans must be removed, laid out on a horizontal surface and strut down from the knee.
• Carefully make throwing seams along the line marked with pins and put on again for fitting.
• Cut off excess centimeters of fabric.
• On a sewing machine to make durable seams on metal.
• You can use a zigzag or overlock to process the edges.

• Inexperienced needlewomen should not completely steam out the legs, as the crotch area is very difficult to sew up correctly.
• When choosing threads, it is worth giving preference to threads for sewing jeans, although they can be replaced with ordinary ones.
• All seams must be double stitched, which guarantees durability.
• Do not rush to cut the threads. The reinforcing seam must have stitches.