Doors to the shower: types, sizes and secrets of choice

Doors to the shower cabin are divided into several types. They also vary in size and geometry. Knowing the secrets of choice, the consumer will be able to count on comfort and usability.

So, let's get acquainted with the varieties of doors.

The very name of this type of shower door comes from the fact that they open. Such a solution is almost always suitable for the bathroom and has both positive and negative sides. Doors are equipped with hinges connecting the box and the canvas. They will help to keep the canvas inside the opening.

In addition to the canvas and the jamb, in the opening will be placed:

• a set of platbands;
• box;
• loops;
• sometimes special extras.

The box in plan resembles the letter P. It takes the load created by the door leaf. The fixed box is equipped with hinges. A web is attached to these loops. In the last place they mount the platbands.

They are attached from the side of the wall. Almost all platbands have a telescopic design, which means literally fastening to the box on the grooves. There is no need to use nails and screws. Old-fashioned platbands can be nailed to the wall or duct with medium-sized nails. However, the quality of such structures is not too high.

Advantages of swing doors are:

• effective clipping of extraneous noise;
• heat retention;
• odor control;
• nice appearance;
• a wide variety of external design and dimensions;
• the possibility of using various materials and internal fillings.

But keep in mind that the swing-open design can be quickly slammed from strong drafts.It is necessary to mount limiters on the floors. Otherwise, the pen will hit the wall and ruin it. The typical height of the swing door leafs is 2 m. Some manufacturers may offer models 1.9 m high, but finding them is not too easy.

There is a strange opinion that sliding doors appeared recently. But such an assumption is erroneous. Such constructions were invented in ancient times, and they still remain relevant. Sliding doors can be parallel or folding; the difference between them is related to the design and installation method.

The parallel-sliding model is divided into sashes moving on rollers along special rails. This performance is extremely reliable. The sliding door serves for many years without any problems. The length of the profile varies from 1.5 to 2 m. The number of wheels is determined by the length of the door. Necessarily provided stoppers, restricting the movement of the wheels when moving the wings.

Sliding doors are becoming increasingly popular. This performance is distinguished by rigor and stylistic endurance.

The sliding door takes up relatively little space. Therefore, they are recommended for use in small bathrooms. Sliding doors perfectly absorb extraneous noise. Mount them with your own hands is not difficult. Some designs are made so that the door leaf goes inside the wall after opening the door to the end.

Another name for a folding door is a book door. It has 1 or 2 wings, which are further divided into sections. Segments move on rollers of a special sample. Each roller is supplemented with stoppers and clips. To fix the main part of the door to the box use:

• loops;
• supports attached to the floor;
• supports attached to the upper beam.

Folding doors can be made based on:

• solid wood;
• MDF;
• plastics
• glass;
• black stainless metal;
• aluminum;
• several dissimilar materials.

A striking example of such products are rotary doors. They are both practical and stylish. You can open the opening with the movement of one hand. After that, the door will swing smoothly and clear the passage. When the door is closed, the door looks exactly like a typical one-leaf panel.

The rotary model is universal and fits perfectly with the latest design styles, even in high-tech. Inside the opening, it is located at a right angle, and in a similar position it occupies both internal and external space. In terms of protection against noise and heat leakage, the rotary design does not differ from conventional models. But much depends on the material used and on the insulating linings. The rotary door is considered very safe and will not close unpredictably from drafts.

You can mount such a design on canvas weighing no more than 70 kg. Otherwise, the locking system may not withstand the load.

It’s easy to distinguish such doors from compartment ones - they do not go along the wall, but curl up like furs inside a musical instrument. Folding occurs towards a jamb. "Accordions" can have 1 or 2 wings. In each canvas, 3-4 narrow vertical sections are distinguished. Hinges connect them together. Sections through one from above are equipped with carriages with rollers.

Roller movement occurs along guide rails placed at the top of the opening. In the direction of the jamb, the canvas goes when the door will open, and during closing it moves to the center. The accordion design stands out for its compactness. Due to the insignificant thickness of the paintings, a little space is lost.

Deserve special mention corner doors. They are valuable for their unique appearance. Such designs can guarantee excellent aesthetic properties of the shower and the bathroom as a whole. You can organize openings even where it is prohibited for architectural reasons.

Such designs:

• allow you to combine adjacent spaces;
• allow them to be separated;
• visually increase the space;
• add comfort.

Choosing the material for the door to the shower, you need to consider such requirements:

• resistance to moisture;
• mechanical strength;
• antiseptic security;
• resistance to temperature;
• ease of use;
• sanitary and environmental safety.

Natural materials for shower doors are practically not suitable. They may dry out and crack. However, this does not mean that artificial substances are definitely better.

A large part of modern doors is made of composite materials. The bottom line is that the door leaf is glued from synthetics, and veneering or a variety of decorative films helps to improve the appearance. The problem is that even a decent quality composite is not too durable. A solid array would be good for everyone if it did not dry out under the influence of moisture and jerks of temperature.

Depreciation is highly dependent on the type of wood used and how it was processed. And yet, the popularity of solid wood doors is very high. Such designs immediately increase the status of the owner.

Laminated wooden doors are very resistant to moisture. They are made on the basis of MDF. A special coating is placed on top that enhances decorative qualities. Then it is laminated. Usually the laminating film is quite durable. However, it can be broken even with a slight mechanical impact; as soon as the integrity of the film is lost, moisture will quickly destroy the main structure.

Quite often, the doors to the shower are made of plastic. They perfectly satisfy all the requirements for entrance structures in wet rooms. High-quality plastic is almost not deformed from moisture or temperature changes. In the reviews, it is noted that the doors made of it perfectly retain heat and protect against extraneous noise.

Many people prefer glass doors. Quality glass is much better than plastic. This material is not damaged by water and calmly tolerates jerks of temperature. Glass never rots. It immediately creates the feeling of a unique, expensive product.

Glass constructions have a strong drawback - transparency. However, modern technology successfully solves this problem. It is easy to apply various patterns to glass by sandblasting. Sometimes the doors are covered with a film, which adds aesthetics and completely solves the problem of transparency. And even the fragility of the glass was learned to eliminate, coping simultaneously with the danger of injuries.

Polycarbonate structures are quite rare. This material is stronger than glass. Polycarbonate is also very light, almost weightless. Everything is mounted easily: the frame is framed by a profile. Caring for polycarbonate is easy.

It is often believed that in standard apartments you can use doors with standard sizes.But not so simple. Be sure to make accurate measurements immediately. Almost all specialized companies can produce the canvas according to exact dimensions. However, they charge a lot for such orders.

A typical opening width may be:

• 60 cm;
• 70 cm;
• 80 cm;
• 90 cm

An example of a shower door with a size of 130 cm by 195 cm is Cezares Verona B13. This is a single swing structure. Glasses are painted in chrome color and have a matte sheen. Profile can be adjusted. Brand warranty is given for 3 years.

Model RGW Passage PA-12 has a size of 110 cm by 195 cm. This is a matte door with adjustable width. A characteristic feature is the sliding execution. The chromed profile is very reliable. Providing easy access during cleaning helps temporary removal of the lower rollers.

Good Door Latte WTW-120-C-WE - modern transparent door. Its size is 120 cm by 185 cm. The glass door is equipped with a reliable electromagnetic lock. Effective leak prevention is provided thanks to gaskets. All alloys in this model are highly resistant to corrosion.

WasserKraft Lippe 45S09 - a good alternative. Two-sectional construction of 170 cm by 190 cm. The profile is made of first-class aluminum. The thickness of the glass is 0.6 cm. Almost all people like the chrome color of the profile.

If you choose a door 180 cm by 185 cm, you should give preference UNO-BF-2–180-C-Cr models. A sliding product with frosted glass looks very thumbs up. The profile is painted in glossy chrome tone. You can equip the door with a corrugated or transparent cloth. Width is adjustable from 1,784 to 1,81 m.

Semicircular doors are quite popular. They appeared on the Russian market several years ago. A semicircular door can be equipped with a hinged or hidden mechanism. Sliding canvases have a smooth shape and therefore look non-standard. It is recommended to carefully choose a semicircular door for the style of the room.

The traditional solution is a rectangular door. It creates a feeling of classic filling of space. Making it at a furniture factory is cheaper and easier. Therefore, such designs can save. This form does not affect the quality.

More original solution:

• square;
• arch;
• polygon.

The use of transparent doors is often perplexing. But in reality they are very attractive and create a favorable impression. It is possible to make a transparent design both from glass and from special types of plastic or polycarbonate. But in the bathroom everything, except glass, looks frankly cheap and careless.

It is often believed that frosted doors to the shower cabin are always white. But in reality this is not so - the designers have worked out a lot of original solutions. Matting is performed:

• sandblasting;
• application of paints and varnishes;
• spraying of special compounds;
• dressing with special reagents.

Choosing patterns, you can give preference plant patterns. They are almost neutral and look attractive in almost any environment. Golden and silver spraying is perceived no worse.

Among the shower doors made in Germany, it deserves attention AM. PM Sensation W30G-E3D5-200-CT. This model belongs to the selection Sensation. The height of the door is 2 m and the width is 0.8 m. The design is equipped with a chrome profile and has a right-handed design.

Great for a niche door Bravat Drop BD120.4100A. The product belongs to the Drop collection. Dimensions of the structure are 1.2 m, and the height is 2 m. The style is hi-tech. The chromed profile works very reliably, as does the sliding mechanism.

Brands in Italy have a very good reputation. Including the model SAMO FDT. It is designed to be installed in a niche measuring 0.765x0.8x 1.9 m. Everything looks attractive, even a bronze handle. Clear glass blends well with a partial frosted decor.

From products made in Russia, it is worth taking a closer look at the brand's shower doors River Model Dreike 150 It can be equipped with frosted or tinted glass. Consumers can choose between white and chrome. The four-section sliding door works very reliably. Its width is 1.5, and the height is 1.85 m; the rollers themselves are adjusted as necessary.

It is useful to think about buying shower doors. Vegas Glass. This manufacturer can offer folding, sliding and tilting structures. The profile is painted in noble bronze or in the color of chrome or gold. The design of Vegas Glass is in the spirit of impeccable hi-tech. Installation is possible both in a niche, and on a podium, and on a shower tray.

Products Gemy also do not discount. Leaves a very favorable impression New Rockcoco 80. Good grades are also given Modern Gent, Victoria, Sunny Bay 120. Gemy uses a particularly strong transparent glass, which is inserted into the chrome-plated aluminum profile. The range includes sliding, swinging and folding structures.

Roltechnik is a budget Czech alternative. The company has been present on the market for 25 years. Roltechnik products are distinguished by quality, but the company does not deceive consumers with false exclusivity and unique characteristics. You can purchase doors with a width of 0.7-1.6 m through a company store. There are no folding "accordions" in the assortment; All delivered doors are decorated in a modern interior style.

Some experts advise thinking about buying doors Appollo. Model TS-025 has a traditional direct execution. A single swing open sash was used. The profile is coated with a protective chromium layer. Designers have provided for the use of tempered glass, which does not pose any danger to people.

Good reviews also come on fences with model doors:

• TS-0515 (IV) L;
• TS-0515 (lll) L;
• TS-685.

The latest model in today's review is Beloya by Cooke and Lewis. This is a swivel design with clear glass. It can be placed in a niche formed by three walls. Corner installation is made with the side panel.

Hinged doors should not be chosen if they meet with any obstacles. Therefore, in small bathrooms, other solutions are chosen. An increase in the number of leaves in the sliding door makes it stronger. However, at the same time, the interior space in the cabin is reduced. Instability of sliding structures can also create problems.

Plastic rollers have too little resource. Due to their wear, the flaps do not go well or even completely fly out of the profiles, so metal parts are better. It is necessary to pull the sliding door from above and below. Some gaps may be, but the design should not shake like an aspen sheet. A plastic profile is chosen if it is necessary to achieve increased moisture resistance, aluminum - if in the first place mechanical strength.

If you have the means, you can choose doors instead of relatively cheap tempered glass from triplex. This material has 2-3 layers, separated by a special polymer. Such a door practically does not collapse, and if it is damaged, then fragments will not appear. If tempered glass is too expensive, you can choose plexiglass or polystyrene.

And a few more subtleties:

• custom shower door models are always more expensive than finished products;
• you must go to buy where there is more assortment, not lower prices;
• it is advisable to read reviews before buying;
• in the bathroom of a non-standard layout, the cabin and the door for it must be chosen with the help of a designer.

See how to install the door to the shower in the next video.