Shower cabins with a seat: features, varieties, selection rules

An additional convenience during showering is the presence of a seat, which is why many consumers are interested in cabins equipped with a high chair or bench.

A chair in the shower compartment is used for comfortable hygiene procedures: a person sitting on it can get rid of heaviness in his legs, relieve fatigue, just relax, lowering his legs into the water drawn into the pan. A shower with a seat is ideal for people who find it difficult to stand during a water treatment.

The advantages of using booths with a seat are directly dependent on the pallet.

• Bench in the shower low pallet creates convenience for helping during water procedures to sick or elderly people, people with disabilities, small children. They can easily get into the box and get out of there.
• In the cockpit high pallet it is possible to draw water and temporarily close the drain with a special stopper. The internal space warms up well, which creates convenience for people with disabilities to perform hygiene procedures.
• In the hydrobox with middle pan compared to a cabin with a flat bottom, there is no accidental overflow of water over the edge. Unlike a pallet with a high side, it is convenient for everyone to enter such a cabin.

but lack of sides in boxes with a low pallet It doesn’t make it possible to draw water for bathing the baby or taking a water treatment for the feet.In addition, the bottom cools much faster than the versions with a high pallet. If the drain hole is clogged, there is a chance of flooding the bathroom.

It is difficult to enter the booth with a deep pallet for sick and elderly people because of the high side.

Hydroboxing should fit well into the interior of the bathroom. The cabin without external panels can be integrated into the bathroom independently. There are different types of showers. It is necessary to select a model that matches the design of the room.

The shower enclosure, in which the rear wall and the upper canopy are not provided, is called an open cabin. The design involves connecting to the drainage system of the pallet, attaching it to a wall or corner. On the side around the perimeter, waterproof panels are installed. The advantage of open-type shower structures is their simple assembly, easy and quick dismantling. Choosing an open model is a great solution for cramped rooms.

An autonomous, sealed hydrobox with a ceiling is most often equipped with a large number of functions. In a closed cabin it is convenient to take healing procedures, listen to music, answer phone calls. Water in the shower, insulated on all sides by partitions, is not sprayed throughout the bathroom.

The cabin, designed for mounting in the corner of the room, looks perfect in any bathroom. Wall-mounted design saves a significant part of the space. The model on a high pallet has excellent heat dissipation and easily turns into a bathtub for children. The corner cabin with an average pallet is a decoration of a small room. Due to the glass and mirror coating, it looks compact.

The hydrobox connected to the bath is partially separated from it by a partition. The design allows not only to take a shower, but also soak in the bath. Combined models are equipped with many additional features.

The seats in the shower stalls are presented in different shapes and designs.

• A peculiar protrusion in the form of a stool can be integrated into the wall or pallet and is an integral part of them.

• Comfortable benches are built into some showers.

• The hinged seat is attached to the panel with anchor dowels or by gas welding. It is necessary to provide for the wall to support the weight of a person. The fabric seat is not suitable for use: material that can withstand moisture and dampness should be selected.

• Many consumers use a folding plastic stool. The lightweight seat can withstand loads of up to 150 kg. The stool is convenient for operation and storage.

Models are represented by a wide variety of sizes. There are many different products from the smallest 70x70 cm to the largest - 150x150 cm. The dimensions 80x80 and 90x90 cm are considered ideal parameters for a booth with a seat. Boxes can have non-standard dimensions: 110x85, 160x90 cm, 170x110 cm, etc. A flat pallet in height is 35 cm, medium - 18 cm, deep - 45 cm.

On a low pallet, open-type cabs and semicircular models are installed. Closed and corner hydroboxes can be with high, medium and low pallets. Combined cabins are most often mounted on deep pallets. They are produced with an average pallet. The total height of this design usually reaches 245-250 cm, length - 150-170 cm. The standard height of the built-in chair is 45 cm, for a tall person - 55 cm.

Boxing frame details make from aluminum, dense plastic with rubberized elements. To prevent injury to consumers, the sealed glass partitions are made of tempered, shock-resistant glass. For the manufacture of curtains and doors, polycarbonate, polystyrene, and glass are used.Folding chairs are made of bamboo, plastic, stainless steel.

Bamboo is the only type of wood that is ideal for wet rooms. All other wood varieties have a swelling property.

Folding stools are made of plastic. Material is not afraid of water. After use, it does not require thorough drying. It is durable, but eventually loses its attractive appearance. The pallet and the seats integrated in it are usually made of durable materials. Used cast iron, earthenware, steel, acrylic, and boiled.

• Cast iron holds heat well.
• Faience differs in fragility and exacting in leaving.
• Pallet of steel cools down quickly. In addition, it can bend under the weight of a heavy person.
• Lightweight and durable acrylic perfectly drowns out the sound of falling water. In addition, there is the possibility of using a variety of colors.
• Cooked combines acrylic and quartz. A successful combination of the beauty of natural stones and the elasticity of acrylic gives the pallet greater rigidity, excellent wear resistance and excellent texture.

When choosing a shower cabin, it is necessary to take into account the dimensions of the bathroom. It is necessary to carefully measure, calculate everything to the smallest detail. It is necessary to leave a spare space for the location of other items in the bathroom and for the possibility of repair work. Before buying, you must carefully inspect the hydrobox to exclude the presence of cracks and other defects. It is necessary to check the build quality of the cab. Make sure the strength and reliability of the fastening of individual parts and elements.

Boxing must be airtight. The pallet must be chosen with a rough bottom, so as not to slip on it. It is best to choose a product lined with a special anti-slip coating. The seat must be tight. The reliability of the design is checked by sitting on a chair.. This makes it possible to find out whether it fixes a person well, whether it is comfortable, and whether the height is adjustable.

The seat is purchased additionally. It should be in harmony with the interior of the shower. Of no small importance is the material from which the product is made. It is necessary to give preference to a solid model. It is best to choose a folding chair made of plastic, stainless steel or waterproof wood.

A review of the shower with a seat, see the next video.