Sometimes in the bathroom there is not enough space for the necessary things, so people have to come up with innovative solutions. Some people put a washing machine in the hallway or even in the room. Of course, this is not an option, the design of the living room does not provide for washing equipment. You can come up with a better way to place such a technique in the interior - for example, put it over the toilet in the toilet.
Some nuances
Of course, for such a solution, you need a reliable foundation on which the washing machine will stand. When there is an idea - it can be implemented, the main thing is to correctly organize a place for technology. The advantage of this approach is that you can build a door in the toilet that will hide the washing machine.
It should be noted right away that a washing machine over the toilet is, rather, a forced decision. And if there is no other way out, it remains to resort to this option.
If there is a place, then do not rush, because limited space can create difficulties during installation, in addition, the creation of a reliable support for the machine is required, since the device is heavy. At a time when the machine washes clothes and clothes, a visit to the toilet becomes difficult. A washing machine is a technique, but it can break. To remove it and carry out diagnostics, it will take strength, because it will not be so easy to do because of the weight of the equipment. And after the diagnosis, it will have to be put back in place - this is not so easy.
When a decision is made, you need to find out what size the washing machine is. In addition, the back wall of the toilet is measured, and you should not ignore the passage of all existing hoses and pipes.
When installing equipment over the toilet, do not forget that the bulky model will bulge and cause discomfort, so you will need the most compact model.
The washing machine will be located over the toilet which means that you will have to reach out to it each time (people of small stature will probably even have to use a chair). The entire structure should be in a niche, otherwise the protruding part will cause discomfort. If there is no way to change the washing machine, then you can take the toilet forward, however, this will require additional time and expenses for the work of the masters.
Creating a robust design
After all measurements have been performed, that is, the width, depth, height has become known, it is possible to build a reliable structure on which the washing machine will be located.
It is important not to forget that the depth should be selected according to the size of the machine - so that the device does not protrude.
For maximum reliability, professional craftsmen advise using a 40 by 40 metal corner as a basis. Using a hacksaw, cut pieces into pieces: 3 by 60 cm, 2 by 55 cm, 2 by 45 cm.
Do not forget that when the “spin” button is turned on, vibration will begin, and in order to withstand its construction, the following rules should be followed.
- Prepare a few pieces (discussed above) that will fit the size of the equipment.
- The first is installed above the tank, and the other is attached to the wall, which will be parallel to the previous one and somewhat lower.
- The next step is to create a frame. To do this, weld 2 small corners. Then they are interconnected using another piece.
- For maximum endurance, it is advisable to make nearby another support below. The result is a reliable shelf that can withstand heavy weight. It will be better to purchase iron corners, as well as reliable fasteners. If there is no experience with the welding machine, then it is better to call the masters.
Device connection
After the construction stage of a reliable shelf, the next one is to connect the device to communications, namely to water supply, power supply, sewage. You should consider the entire process of the discharge of water and drain.
In no case should a short circuit occur, therefore it is more advisable to use a waterproof outlet in the toilet.
- Power supply. The outlet must be in a convenient place, one that is easy to reach. It is desirable that it be moisture resistant - if there is none, then it will have to be created by one’s own efforts. A 3-wire insulated wire of 2.5 mm2 is required to extend from the shield. Next, the wire is in the cable channel and through the machine is connected to an outlet.
- Sewerage. The first step is to properly place the drain hose - it should not be located below 50 cm from the machine. Otherwise, the water will constantly drain to the floor. The hose attaches to a riser or siphon. For a tight connection, sealant and sealing sleeves are required.
- Water pipes. Usually the connection is made in cold water, it must first be disconnected. A tee crane must be inserted (well, if the pipe is metal-plastic, because in the case of a metal one has to perform welding work) into the pipe section. Next, a water inlet hose is screwed to the tap, which moves away from the apparatus. The supply valve (for connecting the hose) is usually chosen with a locking system, so that in case of emergency it is possible to quickly shut off the water.
The opinions of people regarding the installation of the apparatus over the toilet are divided - someone considers this option to be the best for themselves, because space is saved, and someone is afraid that the washing machine will fall. In addition, it is not easy to combine the cleaning process and going to the toilet (some wash very often). Mostly this method is resorted to in extreme cases - when there is no place at all. Whether or not to realize this idea is up to you.
See below for how to make a shelf for a washing machine above the toilet.
