Pattern and tailoring of a simple cut blouse

Very often, many girls are faced with this kind of situation, when the blouse seen in the fashion magazine seems to be an ideal option, but it is impossible to find such, or at least a similar, thing in the store. Or, it is impossible to purchase a thing from one of the fashion brands because of the too high cost.

Do not despair, because there is always a way out of any situation, and in this case, of course, there is one. There is a sewing machine in almost every home, and fabric per meter, along with other sewing accessories, will come out much cheaper than the finished product. That is why, the best way out of this situation is independent tailoring of the desired product.

Like any business, sewing clothes requires some mandatory attributes, without which it is impossible to do. Let us consider in more detail what particular details of sewing accessories are necessary, as well as what is important to consider when sewing a simple cut blouse.

It does not matter which model your sewing machine is, the main thing is that it works correctly and does not have any defects that adversely affect the appearance and quality of the fabric.

An important factor is the correct choice of a sewing needle that matches the type of fabric, because otherwise, a too thick needle can leave inaccurate, too large holes on the material.

When choosing a material for a blouse, you can not set yourself any strict frames, since different models of blouses can be made of completely different fabrics.

Distinctive features can relate only to the style or model of your desired blouse. So, for example, for a summer model with a short sleeve, or even without it, linen fabric, light chiffon or cotton is perfect.

A simple straight blouse is best made from cotton fabric, and an elegant elegant model from silk fabric.

Nowadays, making patterns does not require any special work, since the necessary attributes are only specialized paper, pencil and ruler.

Instructions for making patterns for the product you like can be easily found on the Internet, the main thing is to strictly follow them so as not to mess up anything. But if, the blouse model was invented and developed by you personally, you will also have to carefully work on the manufacture of patterns.

It is quite obvious that creating a pattern is impossible without a careful measurement of the body volumes necessary for sewing the product in accordance with the required size. Since the pattern is made in half, the results obtained during the measurement should be divided in two.

Depending on the model of the blouse, certain measurements will be necessary, but the standard sizes always remain the same:

• length of the product;
• sleeve opening width;
• chest girth;
• waist circumference
• hip girth.

Depending on the individual preference, the neckline can be of absolutely any depth, in addition, if the product has a high collar, it is also necessary to measure the girth of the neck.

In addition, if there is a sleeve, you need to determine its length and measure your hand in several places, namely in the biceps, forearms and wrists, as well as determine the width of the cuffs.

It should be taken into account, if you want to sew a loose-fitting blouse, you need to add a few centimeters to the results obtained during the measurement, as well as leave a couple of centimeters for seam allowances.

This model of a blouse, made of soft material that is pleasant to the body, has a light free cut, which makes it especially popular for the warm season. But the pattern and the sewing process itself is surprisingly simple, even someone who has never dealt with a sewing machine will cope with this task. The model has a one-piece sleeve; for its manufacture, you can choose light linen or cotton fabrics. Consider directly the process of manufacturing the product.

It is necessary to make a pattern in accordance with the volume of your body, taking into account the free cut of the blouse and leaving a few centimeters at the seams. Then, in accordance with the paper pattern, we cut out the necessary details from the fabric.

1. The next step will be the seaming of the seams on the sides, but at the same time you need to leave an unfinished area with a length of about ten centimeters, in the place where you conceive a side incision.
2. Then, it is necessary to sweep the shoulder seams and overcast the throat sections so that the tissue does not fray.
3. It is necessary to bend the seam allowance on the wrong side and lay a line with a width of not more than half a centimeter.
4. The next step will be ironing of the hemmed neck sections, as well as wrinkled areas of the fabric that could have formed during sewing. It is best to use a type of fabric that lends itself well to high temperatures and takes the required shape.
5. Next, the sewing of the shoulder seams takes place, during which it is necessary to simultaneously capture the ends of the throat sections, which have already been processed in advance.
6. It is necessary to overcast the seams on the sides and along the shoulder lines, and also the area left under the incision must be overcast on both sides.
7. Then there is the ironing of the side sections to the front side and the ironing of the section for the cut and shoulder seams.
8. Then you need to lay a line on the sides of the cut, which is a continuation of one of the side seams. This line will be fixing and must be ironed.
9. We trim the lower sections of the whole-cut sleeves.
10. You need to bend these same sections of the sleeves on the bottom, and then make a line, the width of which is about half a centimeter. Some models of sewing machines even have options called a free sleeve.

Next, you need to determine the width of the belt and cut the corresponding part, making a notch in the middle of it, as well as on the front and back parts.

After this, the notches are combined and the control measurements of the details of the belt and the lower cut of the blouse take place.

It is also necessary to note the beginning and end of the belt sharpening line, if desired, you can leave the ends for ties, making them as follows:

• you need to fold and grind the ends of the ties to a certain point;
• allowances must be cut off and a mark should be made in the initial part of the line on the belt;
• it is necessary to unscrew the ties and straighten the corner parts;
• allowance with a mark, you also need to turn on the front side.

1. The obtained part of the belt must be applied to the bottom of the cut blouse, combining the marks, with the front parts to each other, and then chop them with special needles.
2. Then it is necessary to sew the belt details, observing the accuracy, start and end the seam exactly from the mark at the cut.
3. Then you need to iron the seam allowance and cut off the excess part.
4. Next, you need to unscrew the belt detail on the wrong side, bend along the cut line inward and pin it for convenience, then stitch it with a line no more than two tenths of a centimeter.

Note: When bending stock, you can initially use the iron, and then stab with pins. Can be sewn with hand stitches. Depending on personal preferences, everyone chooses the most convenient way.

The stitch should be laid on the front side, being exactly from the edge of the belt part.

At the end of the work, you need to walk along all the lines of the seams and remove the remaining threads in excess, as well as iron the product.

This model has a simple cut, one-piece short sleeve, and the pattern itself consists of two parts. The free style is very relevant in the summer heat and will have to be in place for any walks with friends or even evening events. It should be noted that for the sewing of a blouse of this model, it is best to choose a light fabric, for example, chiffon, linen or viscose.

1. To begin with, you need to make a pattern consisting of two parts and corresponding to the parameters of your body.
2. Before you transfer the pattern to the fabric and cut out the necessary details, the material must be well smoothed from the wrong side, for further convenience.
3. After the parts are cut from the fabric, you need to notice the parts to each other along the side and shoulder sections. It is necessary to sweep also from the wrong side.
4. The lower part of the blouse needs to be bent two times, ironed for better fixation. If necessary, you can notice the bend or fix it with special needles, and then flash it on a sewing machine.
5. The throat section also needs to be beautifully designed. It is best to sew an oblique trim on the front and back parts of which must be cut from the same fabric. For convenience, it is better to first cut out the details from paper, and their width should be about six centimeters.
6. The resulting parts must be folded facing each other and stitched from the inside, while adjusting the edges and sewing parts around the neck cut.
7. The lower part of the neck must be sewn on the machine with an overlock seam so that the fabric does not fray. Then, you need to bend the parts inward, to the wrong side and stitch around the neckline.
8. In addition, you need to bend and hem the edges of the sleeves.
9. Upon completion of sewing blouses for this model, it is necessary to check all the seams, trim the excess thread and iron the product well.