Runbikes: types, device and subtleties of choice

Today there is a huge selection of various children's devices for outdoor activities and movement. Especially popular in recent years are runbikes, presented in a wide variety.

The runbike is a fairly new type of children's vehicle, but it is already in demand among children of different ages. The parents’s trust in the newfangled riding device deserved for a long time, because its similarities, as well as the design differences from a conventional bicycle, had to be tested on their own experience. Over time, excessive alertness to a bicycle without pedals has come to naught, giving way to an understanding of the objective advantages of this running model.

Today, a runbike, presented in a wide variety of species, is called a low bike without pedals, movement on which is possible only when pushing the child off the ground. In some sources, you can find several more names - a bike ride, a scooter with a saddle or a ranbike.

Ranbikes owe their origin to the American company, whose products are now sold throughout Europe, and is also in demand in Russia. A feature of modern runbikes is versatility, allowing you to move on it in different conditions. The ranbike rides beautifully on city asphalt, a similar version of a children's vehicle can be used on a dirt road, also the features of the wheels of the runbikes will allow you to move on it if there is a path along a rocky surface.

Each parent is concerned about the question of the positive impact on the child of the use of one or another device, as well as possible harm. As for the runbike, its operation has many positive features.

• Thanks to walks with a runbike, children experience accelerated physical development. And since the models of such a vehicle provide for the possibility of its use by children from one and a half years, even the smallest will acquire the necessary skills much faster and strengthen muscles.
• Due to the use of a runbike on walks, it will be possible to travel with the crumb without a constant companion of parents - a stroller, which in some cases will be a big burden for a father or mother.
• Most models of runbikes have a minimum weight, therefore, even if the baby is tired, such a bicycle without pedals will be several times easier to carry.
• Such an alternative to a scooter or a bicycle belongs to the category of children's vehicles with minimal injury risk. This is due to the design of the runbike, due to which, even in the most emergency situation, the child can lean on his feet, avoiding falling. And additional protective equipment will practically eliminate the risk of any injuries while walking.
• In addition to early physical development, running for kids from one year will be useful in terms of understanding and maintaining a sense of balance. Of course, models for beginners can, like a runbike, a wheelchair, have a handle for parents, but the non-pedaling option will teach the baby the art of balancing better than any other mobility device.
• There is an opinion that a runbike can be an intermediate preparatory opportunity for children, if they want to learn how to ride a two-wheeled bicycle. As a rule, after running to the latter there will no longer be a need to attach additional small safety wheels to the rear.
• Bedbeds are not only a means of transportation, but also an important element of the game, which will help children learn the basics of joint movement, driving on the sidewalk, being a direct participant in road traffic.
• As a rule, the main components of a ranbike are easily regulated, which allows you to use a children's recreational tool for several seasons, even if the child is rapidly developing and growing.

However, children's bed rest is not without some drawbacks.

• Each child is individual, so this type of transport may simply not appeal to him. Most often this is due to age. Therefore, acquaintance with the runbike can be postponed for a certain period of time.
• Not all models will be convenient to operate in the countryside or off-road. This applies to wooden and plastic models that have low depreciation rates.

The main feature that makes the bed rest different from the usual bike for all is the lack of pedals. A bicycle, even with three wheels or small removable rear wheels, will not always be suitable for children, as some children simply will not be able to pedal, which is excluded in options with ranbikes.

In addition, comparing these two devices, it is worth noting that models with attached wheels do not allow the boy or girl to feel all the nuances of control, namely: the ability and need to keep balance. Without this, you won’t be able to drive an adult bike.

Determined that when running a runbike, the child’s body will experience less physical exertion, so in most cases, riding it is perceived by the baby as a game. Riding a bicycle is not always understood by a child as fun, as it requires greater concentration and accumulation of almost all muscle groups. The bespedalnik will provide an opportunity to train the vestibular apparatus, to maintain balance at such an early age when it is simply too early for a child to think about a bicycle.

The runbike is a universal children's vehicle, so both boys and girls can operate it. On sale there are models that are apparently designed for these two categories of children. As for the age qualification, the optimal time for a kid to get acquainted with a bicycle without pedals is considered 1.5 years. But these are only average values, which can vary in one direction or another, depending on the level of physical and psychological preparedness of the crumbs.

This category may include electric runbike, runbike, variations with the parent handle and other useful additional functionality. For children from 4 years of age, aluminum bicycles without pedals with inflatable wheels, which may have a hand brake, and transformer models, are usually offered.

For an age group of 4 to 7 years, a metalless alloy bed with inflatable wheels will be suitable. There are variations with a special footrest - after all, at this age, the child, as a rule, already perfectly balances together with the ranbike even at high speed. Such runbikes have the ability to adjust the height of the seat, and also the steering wheel arrangement can be adjusted to fit the child’s height.

The runbike is notable for the simplest and most understandable device. The main components of the bed are:

• steering wheel and frame;
• seat;
• wheels.

Among the additional elements of the runbike, it is worth highlighting:

• pen for parents;
• carrying handle;
• footrest;
• the bandwagon;
• brake system;
• case;
• skiing and more.

This version of the balancer without pedals can be used by children from 1.5 to 7 years. This type of runbike is usually purchased as a transitional device between a scooter and a bicycle. Balancers are usually made with wide, one-piece wheels up to 16 inches in diameter. On inflatable wheels, the depreciation will be many times greater.

The frame can be made of metal alloys or wood. At the same time, the mass of large varieties sometimes reaches 6 kilograms - teenagers usually use such models, since the design is able to withstand a load of up to 30-50 kilograms. Two-wheeled runbikes can have a footrest and a hand brake, they can develop good speed, but due to the possibility of long-term use, as well as adjusting the height of the steering wheel and seat, they stand out at a rather high cost.

This version is an improved model of a scooter, but with a seat. Two wheels are usually located at the rear. This kind of bedding is acquired by children aged 3 to 5 years. This option does not require special skills for balancing on a runbike from a child. As a rule, products are made of plastic or aluminum, there are electric models with the possibility of remote control.

This option is designed for kids who can already walk confidently and even run. The design for exploiters of this kind stands out for its stability, which provides a tiny bit of comfort and safety when moving.As a rule, the varieties of the bedclothes of this category will be able to support the weight of the child up to 20 kilograms. The frame for such runbikes is made of plastic, and several toys can be attached to it if necessary.

The seat on the bike can be adjusted to the growth of the baby. However, regardless of the position chosen, on such runbikes it will be located much lower than on bicycles, as a rule, at a distance of 20-25 centimeters from the ground. As for the wheels, the 4-wheel version may have inflatable chambers or one-piece ones. Their optimal diameter will be 8-10 inches.

Among the distinctive features of runbikes on 4 wheels, it is worth noting the light weight of the structure, which provides ease of transportation, as well as the ability to manage it even for a one-year crumb. In addition, it is precisely such bedders that are notable for their bright and colorful design and affordable cost, folding models are found, it is a four-wheeled runbike with shock absorbers that will be the most convenient in operation.

A variety for a wide age group of children, also represented by a large number of different bedclothes. As for models with the possibility of transformation for the smallest, they can easily be converted to a gurney on 3 wheels or to a balancer on two wheels for older children. Typically, such models weigh no more than 5 kilograms, due to the aluminum or plastic frame withstand a load of up to 30 kilograms.

Among the transformers, it is also worth noting the varieties that, if desired, can be converted into a full-fledged scooter, a snowmobile for skiing for winter fun, or a bicycle on two wheels, if the manufacturer equipped its products with pedals. Such transformers will weigh about 7 kilograms, but their design is able to support the weight of an adult.

Models 3 in 1, 5 in 1 and others are an economical option for providing your child with the necessary vehicle for all seasons and ages. Such options, as a rule, can be disassembled, which ensures their compact storage in the home. However, for this multifunctional bed-less you will have to pay several times more in comparison with conventional models.

There are a number of fundamental parameters that are inherent in runbikes.

This indicator is an important nuance that should be considered when selecting a bed. In fact, this is the passenger’s landing height from the ground.

To choose the most suitable vehicle model for the child, it is necessary to measure the length of the limb of the baby from the groin to the foot, and then subtract a couple of centimeters from the value obtained.. The figure that will ultimately be the minimum height of the seat, remote from the asphalt.

If you do not take into account such an important nuance, having bought a runbike with a higher saddle, the child simply will not get his feet to the ground to put the runbike in motion.

An important characteristic of the bedlessness will be its mass. This applies not only to the convenience of transporting a ranbike by parents, but also to the comfort of using the device by a child for a walk. If the purchased model is too heavy, then most likely the child will refuse to use it, in addition, the operation of too heavy runbikes is fraught with serious injuries.

There are a number of recommendations regarding the mass of runbikes:

• for riders from 1.5 to 3 years it is worth considering models whose mass will be no more than 3 kilograms;
• after 4 years the child should already cope with the management of the runbike weighing about 3.5-4 kilograms;
• for schoolchildren and teenagers You can consider options for bedbags weighing up to 6 kilograms.

Manufacturers of such children's bicycles without pedals for their manufacture try to use only light materials. Today on sale there are models from the following types of raw materials:

• wood - this option is popular due to its environmental friendliness, in addition, the tree stands out during its operation by reliability, but provided there is no contact with water;
• aluminum - the most wear-resistant type of materials used, which has a large operational resource, however, metal products are distinguished by their high cost among the rest of the assortment;
• plastic - the category of runbikes with minimum weight, in addition, products from these raw materials are quite durable, but subject to the use of thick polymer for manufacturing;
• stainless steel - Such models of runbikes can be found not so often, as a rule, this will be products for the older age group, since the raw materials have a lot of weight.

Today, the variety of bedbags are equipped with several types of wheels.

A molded version that is made of foam rubber. Such wheels will have a fairly strong and hard rim, so ranbayki on this rubber are resistant to mechanical damage. However, the minus of the wheels will be low depreciation due to the same rigidity, which is why it is recommended to purchase runbikes on rubber of this kind for operation along smooth asphalt paths.

This is a classic version of rubber tires with a camera inside, which will need regular inflation. Runbikes with such wheels have a softer ride, but the risk of piercing such raw materials off-road will be quite high.

This parameter will depend on the type of tires used, as well as the raw materials used to produce the ranbike design. Wooden and plastic models with airless tires are considered to be the bedridden with the lowest cushioning. Products of this kind are recommended to be used only on a good road without bumps.

To operate the runbike in the countryside, on a dirt road and in other conditions unusual for the city, it is worth giving preference to models with inflatable wheels.

The presence of a braking system in the bed rest is not a prerequisite. In particular, this moment will be irrelevant for models of runbikes designed for the smallest passengers who do not develop high speed during the ride.

Most often, the hand brake is present in the middle and senior class of ranbikes, on which children already ride at high speed, and also know how to control their actions well and keep their balance.

Among the popular brands engaged in the manufacture of bedding for children, it is worth noting:

• Kokua;
• Moby Kids;
• Chillafish;
• Strider
• Corol.

Among the runbikes for the smallest, several models are popular.

Products are recommended for use by children from one and a half years. Among the positive features of such a ranbike it is noted minimum weight, as well as a high level of assembly of all components of the structure. The model is presented in a bright and colorful design, in the light of which it will be interesting for kids of all sexes. The wheels are equipped with airless tires, which will be quite difficult to deform or puncture. The height of the steering wheel and saddle can be adjusted.

This model of runbike can be controlled by children, whose growth has already reached 75 centimeters. The design is made of lightweight plastic, in light of which the runbike has a minimum weight. A kind of bed rest can be used with two or three wheels, depending on the needs and skills of the child. The seat can be adjusted in height. Among the necessary additional components of the model, it is worth noting the presence of a small glove box to store the necessary toys and other little things.

Consider the popular models of runbikes for older children.

Universal model that can be operated by a child from 1.5 to 4 years. Among the positive features of the runbike, maneuverability and good cushioning, alloy wheels and the presence of a comfortable running board should be highlighted. The seat and steering wheel can be adjusted in height, the tires can be replaced with inflatable ones if necessary, and older children can be put on the brakes. The weight of the model is 2.9 kilograms.

Runbike can be used by girls and boys, designed for babies whose height will be 100-105 centimeters. Wheels have a diameter of 14 inches, inflatable tires. The frame is made of stainless steel, which positively affects the durability of the model. The weight of the bed is 5 kilograms. The seat has an ergonomic shape with an elongated edge, the set includes a footrest.

A small runbike, which can be ridden by a child with a height of more than 95 centimeters, the model is able to withstand a load of up to 25 kilograms. The frame is made of steel, the tire diameter is 10 inches. The steering wheel is additionally equipped with bumper protection; the runbike has a comfortable footrest.

Affordable variety of children's runbike, attracting the attention of a child with its colorful design, the presence of a signal bell on the steering wheel, low weight. The bike runs on wheels with a tire diameter of 12 inches, the frame is made of lightweight aluminum. The steering wheel and seat are adjustable.

Model for children from 3 to 5 years old, has a bright design, comfortable seat and easy ride. The products are made of lightweight aluminum, the ranbike is quite stable, the seat and steering wheel are adjustable in height.

A bed with 12-inch wheels, recommended for children from 2 to 5 years. On sale is presented in several variations of colors, tires are made of PVC. The model refers to products that are affordable.

A bed for children of an older age group, the design is able to withstand a load of up to 40 kilograms. The model is equipped with rubber tires, so the shock absorption will be high, which will provide comfort for the child when moving. The steering wheel has a limiter, the seat height can be changed to fit the needs of each passenger.

Despite the child’s age, his experience in running a runbike, as well as varieties and models, There are certain safety requirements.

• The child must ride a runbike under the supervision of parents.
• To avoid the risk of injury to the limbs, protective equipment for the elbows and palms should be used.
• For beginners, fans of cycling without pedals should additionally purchase knee pads. It is best to consider soft models that will not interfere with the management of the runbike.
• A mandatory protective tool for children of all ages is the presence of a plastic helmet.

To purchase a model that will be suitable for the child, as well as satisfy all the safety needs of the baby and parents, It is worth considering when choosing the recommendations of specialists.

• It’s best to buy a bed rest together with a child, so you can immediately pick up a model according to its size on the spot. If this is not possible, then, in addition to measuring the step seam, it is worthwhile to additionally measure the length of the foot so that models with supports for the baby are comfortable.
• The next point to consider is the size and shape of the saddle. It is important that the seat is not too narrow or wide.It is important to pay attention to the material of manufacture of the saddle, it is best if the surface is smooth, without additional seams, so as not to rub the skin of the child.
• Almost all models provide for seat and steering wheel height adjustment. However, when buying at this point, it is worth paying special attention to the acquired model to serve the child as a reliable and convenient means of transportation and games for several years.
• To make the ride really comfortable, it is worth choosing runbikes with soft inflatable wheels. Despite the fact that such tires quite often make their way, it is these varieties of bedbeds that will have the best cushioning on rough roads.
• It is important that the steering wheel at the ranbike does not completely rotate around its axis, since in the event of a careless fall, the child can seriously injure the chest.
• Children under 3 years old do not need a hand brake on the steering wheel, however, models of runbikes for older children will be more convenient, since they will allow emergency braking even at high speed. The most successful model with a hand brake will be the one where it will be installed specifically on the rear wheel.

See how to choose the right bike in the next video.